Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 400 mm |
Function | Inner Tie Rod |
External Thread Size | M16 x 1,5, M18 x 1,5 |
Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle, Wheel Side |
Length | 109 mm |
Material | Thermoplast |
Inner diameter 1 | 26 mm |
Inner diameter 2 | 78 mm |
Function | Bellow Kit, drive shaft |
Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (03596)
- 1x Febi Clamping Clip (45642)
- 1x Febi Clamping Clip (38757)
- 1x Febi Nut, kingpin (08023)
- 1x Febi Circlip (03185)
- 1x Febi Spring Washer (07254)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Function | Filter Set, cabin air |
Width | 115 mm |
Filter type | Pollen Filter |
Length | 227 mm |
Height | 17.5 mm |
Type | Filter Set, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 539 mm |
Function | Brake Hose |
Spanner Size | 17 |
Internal Thread Size | M10 x 1 |
Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 9 mm. 16 mm |
Thickness | 30 mm |
Inner diameter | 5 mm |
Pipe Diameter | 6 mm |
Function | Oil Jet, piston underside cooling |
Extra Description | febi Plus |
Type | Oil Jet, piston underside cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Lower, outer, Rear, Rear Axle Right |
Outer diameter | 44 mm |
Thickness | 59 mm |
Inner diameter | 14 mm |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 146 mm |
Outer diameter | 58 mm |
Inner diameter | 27 mm |
Filter type | Filter Insert |
Seal Diameter | 69.5 mm |
Type | Oil Filter |
Function | Oil Filter |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Wheel Side, Front Axle |
Length | 86 mm |
Material | Rubber |
Inner diameter 1 | 20 mm |
Inner diameter 2 | 80 mm |
Type | Bellow Kit, drive shaft |
Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (173209)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Length | 400 mm |
Type | Brake Hose |
Function | Brake Hose |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Steel |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 76 mm |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
External Thread Size | M10 x 1,25 |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Cap, fuel tank |
Extra Description | febi Plus |
Type | Cap, fuel tank |
Additional Information 2 | with support strap |
Lockable | not lockable |
Material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Steering arm type | Control Arm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Mounting and Bolting Kit, control/trailing arm |
Type | Mounting and Bolting Kit, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 4x Febi Bolt, control arm (26337)
- 4x Febi Nut (24522)
- 2x Febi Clamping Bolt, ball joint (10637)
- 2x Febi Nut (10638)
Important compatibility info
Pipe Diameter | 10 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 300 mm |
Material | Steel |
Rod/Strut | Coupling Rod |
External Thread Size | M10 x 1,25 |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle, Wheel Side |
Length | 95 mm |
Material | Rubber |
Inner diameter 1 | 22 mm |
Inner diameter 2 | 85 mm |
Type | Bellow Kit, drive shaft |
Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (17085)
- 1x Febi Clamping Clip (38758)
- 1x Febi Clamping Clip (38765)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Width | 19 mm |
Number of Teeth | 128 |
Belts | with rounded tooth profile |
Function | Timing Belt |
Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 369 mm |
Height | 58 mm |
Width | 134 mm |
Filter type | Filter Insert |
Function | Air Filter |
Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 46 mm. 89 mm |
Outer diameter | 7 mm. 15 mm |
Number of Connectors / Ports | 2 |
Function | Sensor, coolant level |
Type | Sensor, coolant level |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M14 x 1,5 |
Replaces | 33476 |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 145 mm |
Function | Inner Tie Rod |
Extra Description | ProKit |
Type | Inner Tie Rod |
Additional Information | with counter nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 1220 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 6 |
Function | V-Ribbed Belt |
Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 625 mm |
Number of Connectors / Ports | 2 |
Brake Type | Disc Brake |
Type | Warning Contact, brake pad wear |
Function | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Dust Cover Kit, shock absorber |
Material | PU (Polyurethane), Plastic |
Width | 80 mm |
Length | 300 mm |
Placement on Vehicle | Front Axle |
Type | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (18365)
- 2x Febi Protective Cap/Bellow, shock absorber (01367)
Important compatibility info
Length | 297 mm |
Height | 50 mm |
Width | 234 mm |
Filter type | Filter Insert |
Type | Air Filter |
Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 223 mm |
Height | 26 mm |
Width | 115 mm |
Type | Air Filter, traction battery casing |
Function | Air Filter, traction battery casing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle, Rear Axle |
Length | 75 mm |
Material | Rubber/Metal |
Outer diameter | 52 mm |
Inner diameter | 14 mm |
Function | Bushing, leaf spring |
Type | Bushing, leaf spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 258 mm |
Material | Steel |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
External Thread Size | M10 x 1,5 |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Steering arm type | Control Arm |
Function | Mounting and Bolting Kit, control/trailing arm |
Type | Mounting and Bolting Kit, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Nut (24361)
- 2x Febi Bolt, control arm (24391)
- 4x Febi Nut, ball joint (24383)
- 4x Febi Bolt, control arm (24381)
Important compatibility info
Length | 103 mm |
Rod/Strut | Coupling Rod |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
External Thread Size | M10 x 1,25 |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Brake Type | Drum Brake |
Placement on Vehicle | Left Rear, Right Rear |
Length | 1592 mm |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Material | NBR (nitrile butadiene rubber) |
Outer diameter | 175 mm |
Thickness | 14 mm |
Inner diameter | 145 mm |
Function | Shaft Seal, wheel hub |
Additional Information 2 | with ABS sensor ring |
Type | Shaft Seal, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Gasket inner diameter | 37 mm. 48.9 mm |
Gasket outer diameter | 43 mm. 54.14 mm |
Function | Hydraulic Filter, automatic transmission |
Type | Hydraulic Filter, automatic transmission |
Filter type | Filter Insert |
Outer diameter | 44 mm |
Height | 52 mm |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Air Filter |
Type | Air Filter |
Filter type | Filter Insert |
Length | 198 mm |
Height | 42 mm |
Width | 171 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Filter, cabin air |
Width | 209 mm |
Filter type | Activated Carbon Filter |
Type | Filter, cabin air |
Length | 250 mm |
Height | 20 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | Requires special tools for mounting |
Type | V-Ribbed Belt |
Function | V-Ribbed Belt |
Length | 734 mm |
Number of Ribs | 4 |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Chemical Properties | Elastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Filter, cabin air |
Length | 408 mm |
Filter type | Pollen Filter |
Width | 120 mm |
Height | 58 mm |
Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Number of Connectors / Ports | 2 |
Brake Type | Disc Brake |
Cable Length | 591 mm |
Type | Warning Contact, brake pad wear |
Function | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right, Wheel Side |
Length | 117 mm |
Material | Thermoplast |
Inner diameter 1 | 24 mm |
Inner diameter 2 | 78 mm |
Function | Bellow Kit, drive shaft |
Additional Information | with grease |
Additional Information 2 | with clamps |
Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (31689)
- 1x Febi Molybdenum Grease (02582)
- 1x Febi Clamping Clip (45642)
- 1x Febi Clamping Clip (38757)
Important compatibility info
Function | Tie Rod End |
Paired article numbers | 30528 |
Length | 200 mm |
External Thread Size | M10 x 1,25 |
Placement on Vehicle | Front Axle Left |
Type | Tie Rod End |
Internal Thread Size | M14 x 1,5 |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Tie Rod End |
Paired article numbers | 30527 |
Length | 200 mm |
Placement on Vehicle | Front Axle Right |
Type | Tie Rod End |
Additional Information | with lock nut |
External Thread Size | M10 x 1,25 |
Internal Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Lower, Rear, Front Axle Right |
Material | Rubber/Metal |
Outer diameter | 46 mm. 60 mm |
Thickness | 60 mm |
Inner diameter | 12 mm |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Lower Front Axle, Rear |
Length | 99 mm |
Width | 78 mm |
Outer diameter | 50 mm. 62 mm |
Thickness | 42 mm |
Inner diameter | 18 mm |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | PU (Polyurethane) |
Placement on Vehicle | Rear Axle |
Thickness | 143 mm |
Function | Rubber Buffer, suspension |
Shape/Form | Round |
Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Warning Contact, brake pad wear |
Number of Connectors / Ports | 2 |
Length | 1227 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Brake Type | Disc Brake |
Type | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 580 mm |
Height | 37 mm |
Width | 165 mm |
Filter type | Pollen Filter |
Type | Filter, cabin air |
Function | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle, Rear Axle |
Length | 45 mm |
Width | 45 mm |
Material | Rubber with fabric lining |
Thickness | 48 mm |
Inner diameter | 19.5 mm |
Function | Mounting, stabiliser bar |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 232 mm |
Additional Information | with counter nut |
Function | Inner Tie Rod |
External Thread Size | M16 x 1,5, M14 x 1,5 |
Extra Description | ProKit |
Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 191 mm |
Material | Thermoplast |
Inner diameter 1 | 15 mm |
Inner diameter 2 | 55 mm |
Function | Bellow Kit, steering |
Type | Bellow Kit, steering |
Additional Information 2 | with clamps |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, steering (101675)
- 1x Febi Clamping Clip (38755)
- 1x Febi Clamping Clip (38763)
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 45 mm |
Width | 48 mm |
Material | Rubber/Metal |
Thickness | 64 mm |
Inner diameter | 31 mm |
Type | Mounting, stabiliser bar |
Function | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Warning Contact, brake pad wear |
Type | Warning Contact, brake pad wear |
Cable Length | 795 mm |
Brake Type | Disc Brake |
Number of Connectors / Ports | 2 |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 915 mm |
Colour | Black, Grey, Blue |
Number of Connectors / Ports | 2 |
Brake Type | Disc Brake |
Cable Length | 851 mm |
Function | Warning Contact, brake pad wear |
Type | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Outer diameter | 182 mm |
Inner diameter 1 | 39 mm |
Inner diameter 2 | 35 mm |
Function | Spring Seat |
Type | Spring Seat |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023