Proud to be a UK-based company
Contact us
Important compatibility info
| External Thread Size | M14 x 1,5, M18 x 1,5 |
| Weight | 1.36 kg |
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 40516 |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information | with fastening/mounting material |
| Steering | with tie rod end |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (27158)
- 1x Febi Inner Tie Rod (27716)
- 1x Febi Bellow, steering (26506)
- 1x Febi Clamping Clip (38756)
- 1x Febi Clamping Clip (38764)
£34.40
Important compatibility info
| Weight | 2.37 kg |
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 170707 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.04
Important compatibility info
| Length | 231 mm |
| Height | 35 mm |
| Width | 137 mm |
| Function | Hydraulic Filter, automatic transmission |
| Weight | 0.157 kg |
| Type | Hydraulic Filter, automatic transmission |
| Filter type | Screen Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.68
Important compatibility info
| Weight | 0.016 kg |
| External Thread Size | M12 x 1,5 |
| Bolt Head/Nut Design | Male Hex |
| Length | 16 mm |
| Material | Steel |
| Spanner Size | 17 |
| Surface | Zink flake coated |
| Thread Length | 10.5 mm |
| Quality/ Grade | 6.8 |
| Type | Screw Plug, oil sump |
| Function | Screw Plug, oil sump |
| Screw length below head | 11 mm |
| Additional Information 2 | without seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.40
Important compatibility info
| Max. Length | 858 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Function | Shock Absorber |
| Min. Length | 516 mm |
| Pipe Diameter | 75 mm. 63 mm |
| Mounting points diameter | 16 mm. 20 mm |
| Type | Shock Absorber |
| Weight | 5.8 kg |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Design | Telescopic Shock Absorber |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£226.69
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 48 mm |
| Width | 40 mm |
| Thickness | 39 mm |
| Inner diameter | 22.4 mm |
| Weight | 0.044 kg |
| Type | Mounting, stabiliser bar |
| Function | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£8.27
Important compatibility info
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Operating Mode | Automatic |
| Outer diameter | 75 mm |
| Weight | 1.201 kg |
| Type | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.21
Important compatibility info
| Weight | 0.246 kg |
| Inner diameter | 153 mm |
| Number of Teeth, ABS ring | 100 |
| Function | Sensor Ring, ABS |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Steel |
| Outer diameter | 205 mm |
| Thickness | 11 mm |
| Type | Sensor Ring, ABS |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.27
Important compatibility info
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Surface | Coated |
| Minimum thickness | 18.4 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67 mm |
| Brake Disc Thickness | 20 mm |
| Thickness | 50.6 mm |
| Weight | 5.5 kg |
| Rotor Style | Internally Vented |
| Outer diameter | 300 mm |
| Placement on Vehicle | Rear Axle |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£54.59
Important compatibility info
| DIN / ISO | 1185 - Typ N |
| Weight | 0.172 kg |
| Function | Towbar Socket |
| Type | Towbar Socket |
| Number of Connectors / Ports | 7 |
| Voltage | 24 V |
| Additional Information 2 | with screw connection |
| Material | Metal |
| Paired article numbers | 171849 |
| Version | OE Standard |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.69
Important compatibility info
| Weight | 0.017 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Number of Connectors / Ports | 2 |
| Brake Type | Disc Brake |
| Cable Length | 261 mm |
| Type | Warning Contact, brake pad wear |
| Function | Warning Contact, brake pad wear |
| for OE number | 4H0 615 121 J |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£9.62
Important compatibility info
| Track rollers material | Metal |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Outer diameter | 74 mm |
| Function | Belt Tensioner, v-ribbed belt |
| Weight | 1.62 kg |
| Type | Belt Tensioner, v-ribbed belt |
| for OE number | 5 0407 2744 |
| Width of castor bearing surface | 39 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.96
Important compatibility info
| Housing Type | with housing |
| Number of Connectors / Ports | 4 |
| Resistor Type | Hot-film Sensor |
| Function | Mass Air Flow Sensor |
| Weight | 0.211 kg |
| Type | Mass Air Flow Sensor |
| for OE number | 1920.RL |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.62
Important compatibility info
| Wheel Sided Joint Diameter | 91.2 mm |
| Min. Length | 534 mm |
| External Teeth, Diff.Side | 26 |
| Weight | 6.288 kg |
| External Teeth, Wheel Side | 36 |
| Thread Size | M10x1,5 |
| Additional Information 2 | with screw |
| Placement on Vehicle | Front Axle Left |
| Transmission-side joint diameter | 86 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| Material | Steel |
| Diameter | 1 mm |
| Additional Information | with nuts |
| Placement on Vehicle | Front Axle Right, outer |
| Length | 317 mm |
| Thread Length | 25 mm |
| Weight | 0.375 kg |
| Spanner Size | 15 |
| Paired article numbers | 184964 |
| Rod/Strut | Coupling Rod |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M10 x 1,5 |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.85
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 325 mm |
| Thickness | 42 mm |
| Brake Disc Thickness | 20 mm |
| Minimum thickness | 18 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 63.6 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
| Weight | 7.30 kg |
| Rotor Style | Internally Vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.87
Important compatibility info
| Type | Hydraulic Pump, steering |
| Number of mounting bores | 3 |
| Weight | 1.700 kg |
| Operating pressure to | 11 bar |
| Function | Hydraulic Pump, steering |
| Operating Mode | Hydraulic |
| Outer diameter | 17 mm |
| Rotation Direction | Clockwise rotation |
| Number of Connectors / Ports | 2 |
| Internal Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.79
Important compatibility info
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
| ABS Ring Diameter | 78 mm |
| Weight | 1.908 kg |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Thread Size | M20 x 1,0 |
| External Teeth, Wheel Side | 22 |
| Internal Teeth, wheel side | 23 |
| Number of Teeth, ABS ring | 29 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.58
Important compatibility info
| Weight | 1.55 kg |
| Placement on Vehicle | Front Axle Left, Lower, Front, Front Axle Right |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.43
Important compatibility info
| Internal Thread Size | M10 x 1 |
| External Thread Size | M10 x 1 |
| Function | Brake Hose |
| Type | Brake Hose |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 379 mm |
| Weight | 0.085 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£9.26
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023