Important compatibility info
| Function | Oil Jet, piston underside cooling |
| Type | Oil Jet, piston underside cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 140 mm |
| Outer diameter | 65 mm |
| Additional Information 2 | with seal ring |
| Filter type | Filter Insert |
| Type | Oil Filter |
| Function | Oil Filter |
| Gasket outer diameter | 81 mm |
| Gasket inner diameter | 73 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 107 mm |
| Outer diameter | 35 mm |
| Spanner Size | 18 |
| Thread Length | 41 mm |
| Type | Camber Correction Screw |
| Function | Camber Correction Screw |
| Screw length below head | 97 mm |
| External Thread Size | M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Nut (14392)
- 1x Febi Washer (177872)
- 1x Febi Camber Correction Screw (188574)
Important compatibility info
| Length | 277 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Inner Tie Rod |
| Internal Thread Size | M14 x 1,5 |
| Type | Inner Tie Rod |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Additional Information | with counter nut |
| External Thread Size | M14 x 1,5, M18 x 1,5 |
| Function | Inner Tie Rod |
| Length | 286 mm |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
| Replaces | 29235 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Lower |
| Function | Holder, engine mounting system |
| Type | Holder, engine mounting system |
| Replaces | 22760; 22764; 38529 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Engine Management | Timing Chain |
| Placement on Vehicle | Front |
| Function | Guide, timing chain |
| Type | Guide, timing chain |
| Material | Plastic |
| Friction Lining Material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Bellow Kit, drive shaft |
| Inner diameter 2 | 84 mm |
| Inner diameter 1 | 22 mm |
| Length | 83 mm |
| Material | Rubber |
| Additional Information | with grease |
| Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (03282)
- 1x Febi Clamping Clip (38757)
- 1x Febi Clamping Clip (45644)
- 1x Febi Nut, kingpin (02160)
- 1x Febi Spring Washer (07254)
- 1x Febi Circlip (03185)
- 1x Febi Circlip (03215)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
| for OE number | 126 460 06 04 |
| Function | Lock Cylinder, ignition lock |
| Type | Lock Cylinder, ignition lock |
| Lock System | with two keys |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 156 mm |
| Height | 19 mm |
| Width | 153 mm |
| Filter type | Pollen Filter |
| Function | Filter, cabin air |
| Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023









