Important compatibility info
| Opening Temperature | 80 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Thermostat, coolant (17916)
- 1x Febi Seal, thermostat (17964)
Important compatibility info
| Replaces | 49894 |
| Function | Bellow Kit, drive shaft |
| Material | Thermoplast |
| Length | 122 mm |
| Type | Bellow Kit, drive shaft |
| Inner diameter 1 | 25 mm |
| Inner diameter 2 | 80 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (31487)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
| Inner diameter | 15 mm |
| Function | Gasket Set, water pump |
| Type | Gasket Set, water pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Gasket, water pump (03478)
- 1x Febi Gasket, water pump (03431)
- 1x Febi Gasket, water pump (03433)
- 2x Febi Gasket, water pump (03505)
Important compatibility info
| Length | 96 mm |
| Material | Rubber |
| Function | Rubber Buffer, suspension |
| Inner diameter | 28 mm |
| Outer diameter | 95 mm |
| Type | Rubber Buffer, suspension |
| Placement on Vehicle | Front Axle |
| Internal Thread Size | M14 x 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 106.7 mm |
| Width | 64 mm |
| Material | Plastic |
| Thickness | 55.3 mm |
| Function | Lift Point Pad, jack |
| Extra Description | febi Plus |
| Type | Lift Point Pad, jack |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M10 x 1,25 |
| Internal Thread Size | M12 x 1,5 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 174 mm |
| Thickness | 50 mm |
| Spanner Size | 17 |
| Type | Tie Rod End |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M10 x 1,25 |
| Length | 96 mm |
| Paired article numbers | 48155 |
| Outer diameter | 9 mm |
| Rod/Strut | Coupling Rod |
| Thread Length | 22.2 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Placement on Vehicle | Front Axle Left |
| Material | Steel |
| Type | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M10 x 1,25 |
| Extra Description | ProKit |
| Thread Length | 22.2 mm |
| Length | 96 mm |
| Additional Information | with nuts |
| Rod/Strut | Coupling Rod |
| Placement on Vehicle | Front Axle Right |
| Outer diameter | 9 mm |
| Paired article numbers | 48154 |
| Material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Piston Diameter | 20.6 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Aluminium |
| Type | Wheel Brake Cylinder |
| Function | Wheel Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 207 mm |
| Paired article numbers | 109583 |
| Function | Tie Rod End |
| External Thread Size | M10 x 1,25 |
| Internal Thread Size | M14 x 1,5 |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Cable Length | 584 mm |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M14 x 1,5, M12 x 1,25 |
| Additional Information | with counter nut |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 226 mm |
| Type | Inner Tie Rod |
| Function | Inner Tie Rod |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Mounting, control/trailing arm |
| Outer diameter | 40.2 mm |
| Type | Mounting, control/trailing arm |
| Placement on Vehicle | Rear Axle Left, Upper, Rear Axle Right |
| Length | 133 mm |
| Material | Rubber/Metal |
| Hole Spacing | 105 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 184 mm |
| Outer diameter | 175 mm |
| Inner diameter | 96 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Ribs | 5 |
| Function | V-Ribbed Belt |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Length | 1290 mm |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 246 mm |
| Height | 17 mm |
| Width | 99 mm |
| Filter type | Pollen Filter |
| Type | Filter Set, cabin air |
| Function | Filter Set, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 140 mm |
| Width | 140 mm |
| Thickness | 71 mm |
| Type | Protection Lid, wheel hub |
| Function | Protection Lid, wheel hub |
| Internal Thread Size | M136 x 2,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Internal Thread Size | M14 x 1,5 |
| External Thread Size | M12 x 1,25 |
| Type | Tie Rod End |
| Spanner Size | 19 |
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 180618 |
| Function | Tie Rod End |
| Additional Information 2 | with crown nut |
| Length | 165 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Paired article numbers | 180617 |
| Type | Tie Rod End |
| Placement on Vehicle | Front Axle Right |
| Length | 165 mm |
| Additional Information 2 | with crown nut |
| Spanner Size | 19 |
| Function | Tie Rod End |
| External Thread Size | M12 x 1,25 |
| Internal Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 433 mm |
| Height | 31 mm |
| Width | 125 mm |
| Filter type | Pollen Filter |
| Function | Filter, cabin air |
| Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















