Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.215 kg |
| Placement on Vehicle | Front Axle, Wheel Side |
| Function | Bellow Kit, drive shaft |
| Inner diameter 2 | 76 mm |
| Inner diameter 1 | 20 mm |
| Material | Rubber |
| Length | 84 mm |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (03384)
- 1x Febi Clamping Clip (45643)
- 1x Febi Clamping Clip (38757)
- 1x Febi Nut, kingpin (02160)
- 1x Febi Spring Washer (07254)
- 1x Febi Circlip (03185)
- 1x Febi Spacer Sleeve (03385)
- 1x Febi Molybdenum Grease (02582)
£13.07
Important compatibility info
| Length | 206 mm |
| Height | 55 mm |
| Width | 140 mm |
| Filter type | Filter Insert |
| Weight | 0.140 kg |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.07
Important compatibility info
| Weight | 0.244 kg |
| Function | Hydraulic Filter, automatic transmission |
| Width | 157 mm |
| Length | 195 mm |
| Type | Hydraulic Filter, automatic transmission |
| Height | 21 mm |
| Filter type | Screen Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.07
Important compatibility info
| Operating Mode | Electric |
| Type | Stop Light Switch |
| Function | Stop Light Switch |
| for OE number | 95368628 |
| Number of Connectors / Ports | 2 |
| Weight | 0.025 kg |
| Housing Colour | Black |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.07
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Ball Joint |
| Weight | 0.35 kg |
| Replaces | 17724 |
| Type | Ball Joint |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.07
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| for OE number | 34 41 0 410 823 |
| Function | Accessory Kit, brake shoes |
| Type | Accessory Kit, brake shoes |
| Weight | 0.080 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.07
Important compatibility info
| External Thread Size | M12 x 1,5 |
| Weight | 0.38 kg |
| Placement on Vehicle | Front Axle Left |
| Length | 285 mm |
| Paired article numbers | 28672 |
| Rod/Strut | Coupling Rod |
| Thread Length | 26.7 mm |
| Additional Information | with nuts |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.07
Important compatibility info
| Function | Gasket, cylinder head cover |
| Weight | 0.12 kg |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.07
Important compatibility info
| Weight | 0.2 kg |
| Function | Ball Head, gearshift linkage |
| Internal Thread Size | M10 x 1,5 |
| External Thread Size | M10 x 1,5 |
| Length | 36 mm |
| Cone Size | 13 mm |
| Type | Ball Head, gearshift linkage |
| Extra Description | ProKit |
| Placement on Vehicle | transmission sided |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.07
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 75 mm |
| Width | 57 mm |
| Material | PU (Polyurethane) |
| Function | Rubber Buffer, suspension |
| Type | Rubber Buffer, suspension |
| Weight | 0.6 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.07
Important compatibility info
| External Thread Size | M12 x 1,25, M10 x 1,25 |
| Weight | 0.31 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 135 mm |
| Material | Steel |
| Spanner Size | 19, 17 |
| Rod/Strut | Coupling Rod |
| Colour | Silver |
| Thread Length | 29.2 mm |
| Pipe Diameter | 9 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information 2 | with washers |
| Additional Information | with nuts, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.07
Important compatibility info
| Function | Cap, fuel tank |
| Colour | Black |
| Inner diameter | 52 mm |
| Outer diameter | 40 mm |
| Weight | 0.067 kg |
| Extra Description | febi Plus |
| Type | Cap, fuel tank |
| Additional Information 2 | with support strap |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.07
Important compatibility info
| Gasket inner diameter | 70 mm |
| Function | Oil Filter |
| Gasket outer diameter | 78 mm |
| Type | Oil Filter |
| Filter type | Filter Insert |
| Weight | 0.078 kg |
| Additional Information 2 | with seal ring |
| Outer diameter | 64 mm |
| Inner diameter | 32 mm |
| Height | 123 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.07
Important compatibility info
| Weight | 0.216 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Aluminium |
| Function | Wheel Brake Cylinder |
| Piston Diameter | 20.6 mm |
| Type | Wheel Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.07
Important compatibility info
| Weight | 0.474 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 150 mm |
| Rod/Strut | Coupling Rod |
| Bolt Head/Nut Design | Male Hex, Hexagon Socket |
| Function | Link/Coupling Rod, stabiliser bar |
| Outer diameter | 35 mm |
| External Thread Size | M14 x 1,5 |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.07
Important compatibility info
| Opening Temperature | 88 °C |
| Function | Thermostat, coolant |
| Weight | 0.83 kg |
| Outer diameter | 52 mm |
| Type | Thermostat, coolant |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.07
Important compatibility info
| Weight | 0.116 kg |
| Length | 1370 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 5 |
| DIN / ISO | 7867 |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.07
Important compatibility info
| Material | Rubber/Metal |
| Weight | 0.556 kg |
| Placement on Vehicle | Front Axle |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Height | 50 mm |
| Outer diameter | 97 mm. 154 mm |
| Additional Information 2 | without ball bearing |
| Inner diameter | 15 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.07
Important compatibility info
| Length | 1528 mm. 820 mm |
| Function | Cable Pull, parking brake |
| Placement on Vehicle | Left Rear, Right Rear |
| Weight | 0.36 kg |
| Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.07
Important compatibility info
| Weight | 0.108 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Aluminium |
| Function | Wheel Brake Cylinder |
| Piston Diameter | 20.6 mm |
| Type | Wheel Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.07
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023