Important compatibility info
Type | Cylinder Head, air compressor |
Weight | 1.24 kg |
Function | Cylinder Head, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.20 kg |
Placement on Vehicle | Front |
Number of Connectors / Ports | 4 |
Function | Wiper Motor |
Voltage | 12 V |
Type | Wiper Motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Teeth | 19 |
Rated Power | 1.95 kW |
Weight | 5.54 kg |
Type | Starter |
Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.052 kg |
Paired article numbers | 176666 |
Placement on Vehicle | Rear Axle Right |
Number of Connectors / Ports | 2 |
Cable Length | 495 mm |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.36 kg |
Placement on Vehicle | Front Axle |
Length | 140.8 mm |
Width | 60.2 mm |
Wear Warning Contact | with acoustic wear warning |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 16.9 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Thermostat, coolant |
Opening Temperature | 107 °C. 92 °C |
Type | Thermostat, coolant |
Weight | 0.245 kg |
Additional Information | with gasket/seal |
Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.486 kg |
Chain Type | Simplex, Closed chain |
Number of Chain Links | 138. 62 |
Type | Timing Chain Kit |
Function | Timing Chain Kit |
for OE number | L3K9-12-201A S2 |
Extra Description | Standard Medium Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (49713)
- 1x Febi Tensioner, timing chain (170098)
- 1x Febi Guide, timing chain (170101)
- 1x Febi Guide, timing chain (170103)
- 1x Febi Chain, oil pump drive (49777)
- 1x Febi Gear/Sprocket, camshaft (170108)
- 1x Febi Gear Set, oil pump (170113)
- 1x Febi Shaft Seal, crankshaft (107668)
- 1x Febi Chain Tensioner, oil pump drive (170121)
Important compatibility info
Placement on Vehicle | Right |
Type | Mounting, engine |
Function | Mounting, engine |
Bearing/Mounting Type | Hydro Mount |
Weight | 1.500 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.655 kg |
Placement on Vehicle | both sides |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
for OE number | 31262714 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.29 kg |
Placement on Vehicle | Rear Axle Right |
Length | 145 mm |
Material | Steel |
Paired article numbers | 32602 |
Rod/Strut | Coupling Rod |
Pipe Diameter | 9 mm |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
External Thread Size | M10 x 1,25 |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Length | 362 mm |
Function | Brake Hose |
Weight | 0.14 kg |
Internal Thread Size | M10 x 1 |
Type | Brake Hose |
Paired article numbers | 34368 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.787 kg |
Paired article numbers | 22613 |
External Thread Size | M14 x 1,5 |
Placement on Vehicle | Front Axle Right |
Function | Tie Rod End |
Internal Thread Size | M16 x 1,5 |
Type | Tie Rod End |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.322 kg |
Placement on Vehicle | both sides |
Length | 540 mm |
Housing Diameter | 19 mm |
Eject Force | 400 N |
Stroke | 210 mm |
Mounting points diameter | 18 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, boot/cargo area |
Housing length | 299.5 mm |
Replaces | 24325 |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.95 kg |
Parameter | VL120R |
Function | Clutch, radiator fan |
Type | Clutch, radiator fan |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Gasket Set, water pump |
Weight | 0.15 kg |
Type | Gasket Set, water pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Gasket, water pump (03432)
- 1x Febi Gasket, water pump (03433)
- 1x Febi Gasket, water pump (03431)
- 2x Febi Gasket, water pump (03505)
Important compatibility info
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 14246 |
Weight | 2.5252 kg |
Placement on Vehicle | Front Axle Right, Lower |
Replaces | 06505 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Number of Connectors / Ports | 2 |
Cable Length | 647 mm |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Weight | 0.041 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter 2 | 28 mm |
Cooling Hose | from radiator to water pipe |
Function | Radiator Hose |
Inner diameter 3 | 18 mm |
Weight | 0.61 kg |
Inner diameter 1 | 30 mm |
Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.425 kg |
Material | PA (polyamide) |
Internal Thread Size | M18 x 1,5 |
Colour | Black |
DIN / ISO | 74323 |
Number of Coils | 19 |
Working length | 4 m |
Function | Spiral Hose |
External Thread Size | M16 x 1,5 |
Type | Spiral Hose |
Additional Information 2 | with adapter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thickness | 65.0 mm |
Spanner Size | 36 |
Surface | Phosphatized |
Weight | 0.269 kg |
Inner thread | M24 x 3 mm |
Bolt Head/Nut Design | Male Hex |
Quality/ Grade | 6 |
Type | Spring Clamp Nut |
Function | Spring Clamp Nut |






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023