Proud to be a UK-based company
Contact us
Important compatibility info
| Material | Rubber/Metal |
| Outer diameter | 65 mm |
| Bolt Hole Circle Diameter | 21 mm |
| Hole Spacing | 125 mm |
| Length | 39 mm. 49 mm. 155 mm |
| Placement on Vehicle | Rear Axle, outer |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.25
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Lower, Rear Axle Right |
| Length | 573 mm |
| Material | Steel |
| Outer diameter | 50 mm |
| Inner diameter | 19 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Guide Rod |
| Function | Control/Trailing Arm, wheel suspension |
| Pipe Diameter | 50 mm |
| Mounting points diameter | 19 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 130 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.51
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 719.5 mm |
| Housing Diameter | 18 mm |
| Eject Force | 220 N |
| Stroke | 322.5 mm |
| Mounting points diameter | 8 mm |
| Piston conrod diameter | 8 mm |
| Housing length | 372 mm |
| Type | Gas Spring, front panel |
| Function | Gas Spring, front panel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.69
Important compatibility info
| Shaft Length | 19 mm |
| Function | Wheel Stud |
| Screw length below head | 62 mm |
| Material | Steel |
| Surface | Phosphatized |
| Bolt Head Diameter | 30 mm |
| Bolt Head Height Diameter | 8 mm |
| Thread Length | 38 mm |
| Quality/ Grade | 10.9 |
| Length | 70 mm |
| External Thread Size | M20 x 1,5 |
| Type | Wheel Stud |
| Diameter 1 | 20 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.56
Important compatibility info
| Max. Length | 312 mm |
| Placement on Vehicle | Front |
| Shock Absorber Mounting Type | Top eye, Bottom Pin |
| Type | Shock Absorber, driver cab suspension |
| Min. Length | 246 mm |
| Pipe Diameter | 38 mm. 74 mm |
| Mounting points diameter | 14 mm |
| Piston conrod diameter | 13 mm |
| Operating Mode | Mechanical |
| External Thread Size | M14 x 1,5 |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.97
Important compatibility info
| Max. Length | 258 mm |
| Min. Length | 190 mm |
| Pipe Diameter | 40 mm |
| Function | Shock Absorber, driver cab suspension |
| Piston conrod diameter | 12 mm |
| Mounting points diameter | 22 mm |
| Placement on Vehicle | Front and Rear |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.30
Important compatibility info
| Filter type | Pre-Filter |
| Function | Fuel filter |
| Height | 41 mm |
| Outer diameter | 50 mm |
| Additional Information | with fastening/mounting material |
| Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.08
Important compatibility info
| Placement on Vehicle | Front, both sides |
| Width | 22 mm. 18 mm |
| Function | Joint Bearing, driver cab suspension |
| Inner diameter | 30 mm |
| Type | Joint Bearing, driver cab suspension |
| Outer diameter | 47 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.79
Important compatibility info
| Additional Information | with thrust ring |
| Screw length below head | 73 mm |
| Function | Repair Kit, flywheel |
| Type | Repair Kit, flywheel |
| Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Pilot Bearing, clutch (04515)
- 1x Febi Shaft Seal, crankshaft (01203)
- 10x Febi Flywheel Bolt (06076)
- 1x Febi Ring Gear, crankshaft (07720)
£44.46
Important compatibility info
| Inner diameter | 40 mm |
| Paired article numbers | 01909 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 168 mm |
| Cone Size | 28.6 mm |
| Function | Tie Rod End |
| Thread Type | with left-hand thread |
| Internal Thread Size | M52 x 1,5 |
| Extra Description | ProKit |
| External Thread Size | M20 x 1,5 |
| Type | Tie Rod End |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£42.66
Important compatibility info
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.14
Important compatibility info
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 12 mm |
| Function | Shock Absorber, driver cab suspension |
| Placement on Vehicle | Front, Rear |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Operating Mode | Mechanical |
| Pipe Diameter | 47 mm. 38 mm |
| Max. Length | 253 mm |
| Min. Length | 196 mm |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.15
Important compatibility info
| Colour | Blue |
| Function | Shaft Seal, wheel bearing |
| Outer diameter | 136.7 mm |
| Material | NBR (nitrile butadiene rubber) |
| Placement on Vehicle | Front Axle, Rear Axle |
| Thickness | 8 mm |
| Inner diameter | 115 mm |
| Type | Shaft Seal, wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.39
Important compatibility info
| Function | Warning Contact, brake pad wear |
| Brake Type | Drum Brake |
| Length | 193 mm |
| Material | Plastic |
| Outer diameter | 16.8 mm. 8 mm |
| Number of Connectors / Ports | 1 |
| Type | Warning Contact, brake pad wear |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£8.12
Important compatibility info
| Length | 193 mm |
| Material | Plastic |
| Outer diameter | 18.8 mm. 8 mm |
| Brake Type | Drum Brake |
| Function | Warning Contact, brake pad wear |
| Type | Warning Contact, brake pad wear |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£8.12
Important compatibility info
| Surface | Zinc-coated |
| Bolt Head/Nut Design | External Hexagon |
| Quality/ Grade | 10.9 |
| Bolt / Nut Version | Tensilock |
| Function | Screw |
| Length | 40 mm |
| External Thread Size | M14 x 1,5 |
| Type | Screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£4.85
Important compatibility info
| Inner diameter | 31.45 mm |
| Function | Bush, brake shoe pin |
| Width | 19 mm |
| Outer diameter | 35 mm |
| Type | Bush, brake shoe pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£4.69
Important compatibility info
| Length | 54 mm |
| Outer diameter | 25 mm |
| Function | Brake Shoe Bolt |
| Type | Brake Shoe Bolt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.47
Important compatibility info
| Length | 133 mm |
| Width | 127 mm |
| Thickness | 26 mm |
| Function | Seal Kit, multi-valve |
| Additional Information 2 | with spacer plate |
| Type | Seal Kit, multi-valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.62
Important compatibility info
| Material | Steel |
| Function | Cylinder Head Bolt |
| Length | 159 mm |
| Screw length below head | 144 mm |
| External Thread Size | M15 x 2 |
| Spanner Size | 20 |
| Type | Cylinder Head Bolt |
| Quality/ Grade | 10.9 |
| Bolt Head/Nut Design | Male Star |
| Thread Length | 94 mm |
| Surface | Phosphatized |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.81
Important compatibility info
| Outer diameter | 430 mm |
| Thickness | 37 mm |
| Mounting points diameter | 25 mm |
| Material | Sheet Steel |
| Number of Holes | 10 |
| Colour | Silver |
| Surface | Painted |
| Fits rim size | 20 Inch. 22.5 Inch |
| Type | Cover, wheels |
| Function | Cover, wheels |
| Shape/Form | Open form |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.11
Important compatibility info
| Replaces | 12388 |
| Brake Type | Disc Brake |
| Function | Warning Contact, brake pad wear |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 238 mm |
| Type | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£4.76
Important compatibility info
| Function | Gasket Set, water pump |
| Type | Gasket Set, water pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Gasket, water pump (03432)
- 1x Febi Gasket, water pump (03433)
- 1x Febi Gasket, water pump (03431)
- 2x Febi Gasket, water pump (03505)
£11.09
Important compatibility info
| Function | Gasket Set, external planetary gearbox |
| Type | Gasket Set, external planetary gearbox |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Toothed Disc, external planetary gearbox (08005)
- 1x Febi Sealing ring, wheel hub (planetary gearbox) (08006)
- 1x Febi Shaft Seal, wheel hub (08007)
- 1x Febi Seal Ring, wheel hub (08008)
- 1x Febi Seal Ring, wheel hub (05356)
- 1x Febi Gasket, external planetary gearbox (08010)
- 1x Febi Gasket, external planetary gearbox (08011)
£16.17
Important compatibility info
| Number of Wings | 12 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
| Replaces | 03584 |
| Additional Information | with gaskets/seals |
| Type | Water Pump, engine cooling |
| Housing material | Grey Cast Iron |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.98
Important compatibility info
| Housing material | Grey Cast Iron |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| Water pump impeller material | Grey Cast Iron |
| Number of Wings | 12 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Number of Connectors / Ports | 2 |
| Pump Type | Mono Pump |
| Function | Washer Fluid Pump, window cleaning |
| Voltage | 24 V |
| Type | Washer Fluid Pump, window cleaning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.11
Important compatibility info
| Function | Gasket Set, external planetary gearbox |
| Type | Gasket Set, external planetary gearbox |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Toothed Disc, external planetary gearbox (08005)
- 1x Febi Toothed Disc, external planetary gearbox (08488)
- 1x Febi Shaft Seal, wheel hub (05352)
- 1x Febi Shaft Seal, wheel hub (05354)
- 1x Febi Gasket, external planetary gearbox (03429)
- 1x Febi Gasket, external planetary gearbox (08009)
- 1x Febi Seal Ring, wheel hub (05356)
- 1x Febi Gasket, external planetary gearbox (08010)
- 1x Febi Gasket, external planetary gearbox (08011)
£34.40
Important compatibility info
| Length | 45.5 mm |
| Outer diameter | 27 mm |
| Spanner Size | 19 |
| Bolt Head/Nut Design | External Hexagon |
| Type | Screw |
| Function | Screw |
| Screw length below head | 35 mm |
| External Thread Size | M14 x 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£4.85
Important compatibility info
| External Thread Size | M26 x 1,5 |
| Internal Thread Size | M12 x 1,5 |
| Function | Valve, retarder brake system |
| Type | Valve, retarder brake system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.00
Important compatibility info
| Function | Bush, parabolic spring |
| Thickness | 148.4 mm |
| Length | 210 mm |
| Width | 134.4 mm |
| Type | Bush, parabolic spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.91
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Operating Mode | Manual |
| Paired article numbers | 03587 |
| Function | Adjuster, braking system |
| Number of Teeth | 10 |
| Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.28
Important compatibility info
| Thickness | 33 mm |
| Spanner Size | 32 |
| Surface | Zink-nickel coated |
| Bolt Head/Nut Design | External Hexagon |
| Material | Steel |
| Function | Spring Clamp Nut |
| Internal Thread Size | M22 x 2,5 |
| Type | Spring Clamp Nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£7.10
Important compatibility info
| Min. Length | 187 mm |
| Pipe Diameter | 50 mm. 41 mm |
| Placement on Vehicle | Front |
| Type | Shock Absorber, driver cab suspension |
| Replaces | 03892 |
| Mounting points diameter | 14 mm |
| Function | Shock Absorber, driver cab suspension |
| Operating Mode | Mechanical |
| Max. Length | 244 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.17
Important compatibility info
| Paired article numbers | 06241 |
| Length | 120 mm |
| Function | Angled Ball Joint, steering push rod |
| Cone Size | 31.5 mm |
| Thread Type | with left-hand thread |
| External Thread Size | M30 x 1,5 LHT, M24 x 1,5 |
| Additional Information 2 | with crown nut |
| Extra Description | ProKit |
| Type | Angled Ball Joint, steering push rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
Important compatibility info
| Spanner Size | 17 |
| Thread Length | 22 mm |
| Bolt Head/Nut Design | External Hexagon |
| Quality/ Grade | 10.9 |
| Shaft Length | 23 mm |
| Function | Clamping Bolt, ball joint |
| Length | 52 mm |
| External Thread Size | M10 x 1,5 |
| Type | Clamping Bolt, ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£4.59
Important compatibility info
| Outer diameter | 40 mm |
| Inner diameter | 20 mm |
| Function | Mounting, leaf spring |
| Material | Rubber |
| Length | 80 mm |
| Type | Mounting, leaf spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.45
Important compatibility info
| Surface | Phosphatized |
| Bolt Head/Nut Design | External Hexagon |
| Quality/ Grade | 10 |
| Spanner Size | 27 |
| Thickness | 27 mm |
| Outer diameter | 32.8 mm |
| Material | Steel |
| Wheel Fastening | Ball seat A/G |
| Function | Wheel Nut |
| DIN / ISO | 74361 |
| Internal Thread Size | M20 x 1,5 |
| Type | Wheel Nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£4.94
Important compatibility info
| Material | NBR (nitrile butadiene rubber) |
| Outer diameter | 180 mm |
| Thickness | 10 mm |
| Inner diameter | 160 mm |
| Function | Shaft Seal, external planetary gearbox |
| Additional Information | with two sealing lips |
| Placement on Vehicle | outer, Front Axle Left, Front Axle Right |
| Type | Shaft Seal, external planetary gearbox |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£8.12
Important compatibility info
| External Thread Size | M10 x 1 |
| Length | 25 mm. 10 mm. 43 mm |
| Function | Bolt, exhaust system |
| Type | Bolt, exhaust system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£4.73
Important compatibility info
| Function | Pilot Bearing, clutch |
| Width | 12 mm |
| Outer diameter | 47 mm |
| Inner diameter | 25 mm |
| Type | Pilot Bearing, clutch |
| Bearing Type | Rolling Bearing |
| Bearing Code | 6005 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.82
Important compatibility info
| Spanner Size | 27 |
| Control Type | Push Actuation |
| Length | 35 mm. 44 mm |
| Material | Brass |
| External Thread Size | M18 x 1,5, M27 x 1 |
| Type | Control Switch / Switch, 'driver cab tilted' display |
| Function | Control Switch / Switch, 'driver cab tilted' display |
| Replaces | 09963 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.42
Important compatibility info
| External Thread Size | M24 x 1,5 |
| Additional Information 2 | with crown nut |
| Length | 1652 mm |
| Placement on Vehicle | Front Axle |
| Extra Description | ProKit |
| Function | Tie Rod |
| Type | Tie Rod |
| Pipe Diameter | 50 mm |
| Cone Size | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.32
Important compatibility info
| External Thread Size | M12 x 1,5 |
| Function | Bearing, clutch lever |
| Outer diameter | 30.5 mm |
| Type | Bearing, clutch lever |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.02
Important compatibility info
| Number of Wings | 11 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| for OE number | 51.06500.6432 |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
| Housing material | Grey Cast Iron |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.55
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 252 mm |
| Outer diameter | 36 mm. 50 mm |
| Function | Repair Kit, kingpin |
| External Thread Size | M36 x 1,5 |
| Extra Description | ProKit |
| Type | Repair Kit, kingpin |
| Additional Information 2 | without bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (10500)
- 1x Febi Bush, kingpin (14467)
- 1x Febi Washer (10502)
- 1x Febi Seal Ring, steering knuckle (14459)
- 1x Febi Seal Ring, steering knuckle (14432)
- 1x Febi Spacer, kingpin (14460)
- 1x Febi Seal Ring, steering knuckle (14461)
- 1x Febi Seal Ring (14462)
- 2x Febi Spacer, kingpin (14463)
- 4x Febi Spacer, kingpin (14464)
- 2x Febi Spacer, kingpin (14465)
- 2x Febi Spacer, kingpin (14466)
- 1x Febi Split Pin (14433)
£51.94
Important compatibility info
| Length | 45.5 mm |
| Outer diameter | 6.5 mm |
| Function | Spring Retaining Pin, brake shoe |
| Type | Spring Retaining Pin, brake shoe |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£4.26
Important compatibility info
| Function | Repair Kit, brake camshaft |
| Type | Repair Kit, brake camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Holder, brake camshaft seal ring (07480)
- 2x Febi Bearing, brake camshaft (07479)
- 3x Febi Shaft Seal, brake camshaft (07481)
- 1x Febi Shaft Seal, brake camshaft (07482)
- 1x Febi Spacer, brake shaft (07485)
- 1x Febi Stop Plate, adjuster (07484)
- 1x Febi Spacer, brake shaft (07488)
- 1x Febi Spacer, brake shaft (07489)
- 1x Febi Spacer, brake shaft (07491)
- 1x Febi Spacer, brake shaft (07487)
- 2x Febi Circlip (07492)
- 1x Febi Circlip, brake shaft (07493)
- 2x Febi Grease Nipple (06533)
- 1x Febi Spacer, brake shaft (07490)
£29.79
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 125 mm |
| Thread Type | with right-hand thread |
| Cone Size | 26 mm |
| Pipe Diameter | 40 mm |
| External Thread Size | M20 x 1,5, M30 x 1,5 RHT |
| Extra Description | ProKit |
| Additional Information 2 | with crown nut |
| Type | Angled Ball Joint, steering push rod / Tie Rod End |
| Function | Angled Ball Joint, steering push rod / Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.57
Important compatibility info
| Type | Mounting, stabiliser bar |
| Inner diameter | 32 mm |
| Outer diameter | 44 mm. 54 mm |
| Placement on Vehicle | Front Axle |
| Material | Plastic |
| Function | Mounting, stabiliser bar |
| Colour | White |
| Length | 25 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£4.78
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023