Important compatibility info
| Placement on Vehicle | Front Axle |
| Inner diameter | 35.5 mm |
| Function | Mounting, stabiliser bar |
| Width | 35 mm |
| Material | Rubber |
| Outer diameter | 48.5 mm |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Cone Size | 26 mm |
| Pipe Diameter | 40 mm |
| Internal Thread Size | M30 x 1,5 RHT |
| Function | Centre Rod Assembly |
| Rod/Strut | Push Rod |
| Outer diameter | 40 mm |
| Length | 835 mm |
| External Thread Size | M20 x 1,5 |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Cone Size | 30 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 120 mm |
| Inner diameter | 40 mm |
| Thread Type | with left-hand thread |
| Paired article numbers | 15616 |
| Function | Tie Rod End |
| Internal Thread Size | M38 x 1,5 LHT |
| Extra Description | ProKit |
| External Thread Size | M24 x 1,5 |
| Type | Tie Rod End |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Cone Size | 30 mm |
| Placement on Vehicle | Front Axle Right |
| Thread Type | with right-hand thread |
| Inner diameter | 40 mm |
| Paired article numbers | 15615 |
| Internal Thread Size | M38 x 1,5 RHT |
| Pipe Diameter | 40 mm |
| Function | Tie Rod End |
| Length | 120 mm |
| External Thread Size | M24 x 1,5 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thread Type | with left-hand thread |
| Cone Size | 20 mm |
| Function | Tie Rod End |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 105 mm |
| Inner diameter | 30 mm |
| External Thread Size | M18 x 1,5, M24 x 1,5 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 130 mm |
| Outer diameter | 60 mm. 107 mm |
| Function | Bush, connecting rod |
| Type | Bush, connecting rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thread Type | with left-hand thread |
| Cone Size | 22 mm |
| Pipe Diameter | 30 mm |
| Function | Tie Rod End |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 180 mm |
| Paired article numbers | 15755 |
| External Thread Size | M18 x 1,5, M28 x 1,5 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 180 mm |
| Paired article numbers | 15754 |
| Thread Type | with right-hand thread |
| Cone Size | 22 mm |
| Pipe Diameter | 30 mm |
| Function | Tie Rod End |
| External Thread Size | M18 x 1,5, M28 x 1,5 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Cone Size | 30 mm |
| Pipe Diameter | 40 mm |
| Function | Centre Rod Assembly |
| Thread Type | with right-hand thread |
| External Thread Size | M24 x 1,5, M30 x 1,5 |
| Length | 744 mm |
| Outer diameter | 40 mm |
| Rod/Strut | Push Rod |
| Colour | Black |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Cone Size | 30 mm |
| Pipe Diameter | 40 mm |
| Function | Centre Rod Assembly |
| Length | 872 mm |
| Outer diameter | 40 mm |
| Rod/Strut | Push Rod |
| External Thread Size | M24 x 1,5, M30 x 1,5 |
| Colour | Black |
| Thread Type | with right-hand thread |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M27 x 1,5 |
| Cone Size | 30 mm. 32 mm |
| Function | Centre Rod Assembly |
| Length | 840 mm |
| Outer diameter | 48 mm |
| Rod/Strut | Push Rod |
| Extra Description | ProKit |
| Internal Thread Size | M30 x 1,5 RHT |
| Type | Centre Rod Assembly |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Repair Kit, kingpin |
| Additional Information | with Thrust Bearing |
| Additional Information 2 | with bearing |
| Inner diameter | 50 mm |
| Function | Repair Kit, kingpin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bush, steering knuckle (34565)
- 4x Febi Bush, steering knuckle (08524)
- 1x Febi Seal Ring, steering knuckle (05868)
- 1x Febi Seal Ring, steering knuckle (03727)
- 2x Febi Seal Ring, steering knuckle (15795)
Important compatibility info
| Function | Repair Kit, kingpin |
| Length | 222.5 mm |
| Outer diameter | 50 mm |
| Paired article numbers | 11403 |
| Extra Description | ProKit |
| Type | Repair Kit, kingpin |
| Additional Information 2 | without bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (35012)
- 1x Febi Seal Ring, steering knuckle (05868)
- 2x Febi Seal Ring, steering knuckle (15795)
- 4x Febi Bush, steering knuckle (08524)
- 1x Febi Seal Ring, steering knuckle (03727)
- 1x Febi Spacer, kingpin (15797)
Important compatibility info
| Opening Temperature | 83 °C |
| Heating / Cooling | without vent hole |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Thermostat, coolant |
| Opening Temperature | 79 °C |
| Heating / Cooling | without vent hole |
| Additional Information 2 | with seal ring |
| Type | Thermostat, coolant |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Thermostat, coolant (10528)
- 1x Febi Gasket, water pump (03505)
Important compatibility info
| Function | Thermostat, coolant |
| Opening Temperature | 83 °C |
| Heating / Cooling | without vent hole |
| Type | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Thermostat, coolant (15846)
- 1x Febi Gasket, water pump (03505)
Important compatibility info
| Function | Thermostat, coolant |
| Heating / Cooling | without vent hole |
| Opening Temperature | 71 °C |
| Additional Information | with gasket/seal |
| Type | Thermostat, coolant |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Thermostat, coolant (15847)
- 1x Febi Gasket, water pump (03505)
Important compatibility info
| Paired article numbers | 15857 |
| Outer diameter | 54 mm |
| Type | Repair Kit, kingpin |
| Function | Repair Kit, kingpin |
| Additional Information | without kingpin |
| Additional Information 2 | with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 4x Febi Bush, steering knuckle (15858)
- 1x Febi Bush, steering knuckle (15860)
- 1x Febi Seal Ring, steering knuckle (15886)
- 1x Febi Washer (15887)
Important compatibility info
| Additional Information 2 | with bearing |
| Additional Information | with kingpin |
| Outer diameter | 54 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Repair Kit, kingpin |
| Function | Repair Kit, kingpin |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (15864)
- 4x Febi Bush, steering knuckle (15858)
- 1x Febi Seal Ring, steering knuckle (15859)
- 1x Febi Bush, steering knuckle (15860)
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, Front Axle Left, Front Axle Right |
| Inner diameter | 50 mm |
| Paired article numbers | 15882 |
| Type | Repair Kit, kingpin |
| Function | Repair Kit, kingpin |
| Additional Information | without kingpin |
| Additional Information 2 | with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bush, steering knuckle (05132)
- 4x Febi Bush, steering knuckle (08524)
- 1x Febi Seal Ring, steering knuckle (15886)
- 1x Febi Spacer, kingpin (15891)
Important compatibility info
| Length | 237 mm |
| Additional Information | with Thrust Bearing |
| Outer diameter | 54 mm |
| Additional Information 2 | with bearing |
| Paired article numbers | 15899 |
| Type | Repair Kit, kingpin |
| Function | Repair Kit, kingpin |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (15864)
- 4x Febi Bush, steering knuckle (15858)
- 1x Febi Seal Ring, steering knuckle (15886)
- 1x Febi Bush, steering knuckle (15860)
- 1x Febi Washer (15887)
Important compatibility info
| Paired article numbers | 15903 |
| Outer diameter | 50 mm |
| Function | Repair Kit, kingpin |
| Length | 222.5 mm |
| Extra Description | ProKit |
| Type | Repair Kit, kingpin |
| Additional Information | with Thrust Bearing |
| Additional Information 2 | with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (35012)
- 1x Febi Bush, steering knuckle (05132)
- 4x Febi Bush, steering knuckle (08524)
- 1x Febi Seal Ring, steering knuckle (05868)
Important compatibility info
| Length | 222.5 mm |
| Additional Information | with Thrust Bearing |
| Additional Information 2 | with bearing |
| Type | Repair Kit, kingpin |
| Outer diameter | 50 mm |
| Paired article numbers | 15901 |
| Function | Repair Kit, kingpin |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (35012)
- 1x Febi Bush, steering knuckle (15890)
- 4x Febi Bush, steering knuckle (08524)
- 1x Febi Seal Ring, steering knuckle (05868)
Important compatibility info
| Placement on Vehicle | Front |
| Function | Repair Kit, driver cab suspension |
| Type | Repair Kit, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Bush, driver cab suspension (09219)
- 2x Febi Joint Bearing, driver cab suspension (01820)
- 2x Febi Spacer, driver cab stabiliser (09460)
- 2x Febi Spacer, driver cab stabiliser (09461)
- 2x Febi Screw (16287)
- 4x Febi Seal Ring (16288)
- 2x Febi Washer (02350)
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 109.5 mm |
| Width | 73 mm |
| Wear Warning Contact | incl. wear warning contact |
| Thickness/Strength 1 | 18.2 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 164.8 mm |
| Width | 66.5 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 20.2 mm |
| Function | Brake Pad Set, disc brake |
| Additional Information 2 | with bolts/screws |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Brake Pad Set, disc brake |
| Placement on Vehicle | Front Axle, Rear Axle |
| Length | 249.3 mm |
| Width | 111.2 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 29 mm |
| Additional Information 2 | with fastening material |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Replaces | 10672 |
| Placement on Vehicle | Front Axle |
| Length | 175.4 mm |
| Width | 82.5 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 22 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 30.2 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Width | 118 mm |
| Length | 249.5 mm |
| Placement on Vehicle | Front Axle, Rear Axle |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle, Rear Axle |
| Length | 175 mm |
| Width | 85.5 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 21.7 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023





























