Important compatibility info
Number of Connectors / Ports | 2 |
Type | Auxiliary water pump (cooling water circuit) |
Function | Auxiliary water pump (cooling water circuit) |
Weight | 0.36 kg |
Material | Plastic |
Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.449 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 375 mm |
Function | Brake Hose |
Internal Thread Size | M10 x 1, M12 x 1 |
Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.608 kg |
Type | Wheel Bearing Kit |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Width | 75 mm |
Outer diameter | 84 mm |
Additional Information 2 | with integrated magnetic sensor ring, Wheel Bearing integrated into wheel hub, with ABS sensor ring |
Inner diameter | 29 mm |
Bolt Hole Circle Diameter | 104.9 mm |
Bearing Type | Angular Ball Bearing |
Function | Wheel Bearing Kit |
Additional Information | with axle nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing Kit (174804)
- 1x Febi Nut (174805)
Important compatibility info
Number of Connectors / Ports | 3 |
Function | Expansion Tank, coolant |
Additional Information 2 | without lid |
Weight | 0.45 kg |
Type | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Teeth | 10 |
Outer diameter | 101 mm |
Length | 669 mm |
Placement on Vehicle | Left |
Screw length below head | 613 mm |
Function | Brake Shaft, drum brake |
Type | Brake Shaft, drum brake |
Weight | 7.27 kg |
Paired article numbers | 175198 |
Shape/Form | S Shape |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.150 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 175 mm |
Material | Rubber |
Inner diameter 1 | 37 mm |
Inner diameter 2 | 53 mm |
Function | Bellow, steering |
Type | Bellow, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Thermostat, coolant |
Weight | 0.09 kg |
Additional Information | with gasket/seal |
Opening Temperature | 92 °C |
Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Alternator Freewheel Clutch |
Function | Alternator Freewheel Clutch |
Additional Information 2 | with lid |
Inner diameter | 17 mm |
Number of Ribs | 6 |
Weight | 0.363 kg |
Outer diameter | 53 mm. 49 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.085 kg |
Number of Connectors / Ports | 2 |
Pump Type | Dual Pump |
Voltage | 12 V |
Function | Washer Fluid Pump, window cleaning |
Type | Washer Fluid Pump, window cleaning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 000 200 38 22 |
Weight | 1.095 kg |
Number of Holes | 4 |
Type | Clutch, radiator fan |
Function | Clutch, radiator fan |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.525 kg |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 14244 |
Placement on Vehicle | Front Axle Right, Lower |
Function | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Replaces | 06534 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with integrated magnetic sensor ring, with ABS sensor ring |
Weight | 0.912 kg |
Function | Wheel Bearing |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Width | 41 mm |
Outer diameter | 85 mm |
Inner diameter | 45 mm |
Bearing Type | Angular Ball Bearing |
Type | Wheel Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 40 mm |
Inner diameter | 20 mm |
Function | Mounting, leaf spring |
Material | Rubber |
Length | 80 mm |
Type | Mounting, leaf spring |
Weight | 0.101 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Internal Thread Size | M16 x 1,5 |
External Thread Size | M14 x 1,5 |
Weight | 0.77 kg |
Placement on Vehicle | Front Axle Right |
Length | 203 mm |
Spanner Size | 24, 22 |
Paired article numbers | 170717 |
Function | Tie Rod End |
Additional Information | with lock nut |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Max.skimmed drum measure | 229.6 mm |
Type | Brake Drum |
Bolt Hole Circle Diameter | 108 mm |
Centering Diameter | 63.4 mm |
Inner diameter | 228.5 mm |
Thickness | 89.5 mm |
Outer diameter | 279 mm |
Width | 68 mm |
Placement on Vehicle | Rear Axle |
Rim Hole Number | 5 -Hole |
Function | Brake Drum |
Weight | 8.0 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Water Separator, fuel system |
Function | Water Separator, fuel system |
Weight | 0.27 kg |
Number of Connectors / Ports | 4 |
Additional Information 2 | with seal ring, with sensor |
Cable Length | 500 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | febi Plus |
Stroke | 175 mm |
Type | Gas Spring, boot/cargo area |
Function | Gas Spring, boot/cargo area |
Placement on Vehicle | Left Rear |
Length | 659 mm |
Additional Information | with electric motor |
Operating Mode | Electric |
Paired article numbers | 179299 |
Weight | 1.0 kg |
Housing Diameter | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Length | 102 mm |
Outer diameter | 65 mm |
Inner diameter | 30.3 mm |
Function | Bushing, leaf spring |
Weight | 1.033 kg |
Type | Bushing, leaf spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Grey Cast Iron |
Water pump impeller material | Grey Cast Iron |
Seal Material | Rubber |
Number of Wings | 7 |
Weight | 10.95 kg |
Function | Water Pump, engine cooling |
Type | Water Pump, engine cooling |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Cone Size | 30 mm |
Pipe Diameter | 42 mm |
Function | Centre Rod Assembly |
Outer diameter | 42 mm |
Rod/Strut | Push Rod |
Length | 879 mm |
Internal Thread Size | M30 x 1,5 RHT |
Extra Description | ProKit |
Weight | 8.08 kg |
External Thread Size | M24 x 1,5 |
Type | Centre Rod Assembly |
Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 224 mm |
Height | 67 mm |
Width | 160 mm |
Filter type | Pollen Filter |
Function | Filter, cabin air |
Weight | 0.184 kg |
Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.435 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Material | Rubber/Metal |
Outer diameter | 52 mm |
Thickness | 70 mm |
Inner diameter | 16.1 mm |
Type | Bushing, axle beam |
Function | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Cast Steel |
Steering arm type | Control Arm |
Paired article numbers | 32443 |
Weight | 3.13 kg |
Placement on Vehicle | Front Axle Right, Lower |
Function | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Bolt Hole Circle Diameter | 175 mm |
Surface | Coated |
Function | Brake Disc |
Minimum thickness | 28 mm |
Number of Holes | 12 |
Brake Disc Type | Internally Vented |
Thickness | 119 mm |
Brake Disc Thickness | 34 mm |
Weight | 18.0 kg |
Placement on Vehicle | Rear Axle |
Outer diameter | 330 mm |
Internal Thread Size | M12 x 1,75 |
Type | Brake Disc |
Additional Information 2 | with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Gasket, cylinder head cover |
Material | ACM (Polyacrylate) |
Weight | 0.06 kg |
Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 182443 |
External Teeth, Diff.Side | 33 |
Min. Length | 924 mm |
Weight | 8.074 kg |
Transmission-side joint diameter | 74 mm |
Wheel Sided Joint Diameter | 79 mm |
External Teeth, Wheel Side | 26 |
Additional Information 2 | with nut |
Thread Size | M22x1,5 |
Type | Drive Shaft |
Function | Drive Shaft |
Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Water Pump, engine cooling |
Material | Aluminium |
Water pump impeller material | Plastic |
Seal Material | Rubber/Metal, Rubber |
Number of Wings | 6 |
Number of Teeth | 22 |
Weight | 1.49 kg |
Type | Water Pump, engine cooling |
Additional Information | with gaskets/seals |
Additional Information 2 | with gear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 276 mm |
Capacity | 25 l |
Operating Pressure | 15.5 bar |
Function | Air Tank, compressed-air system |
Material | Steel |
Weight | 8.2 kg |
Outer diameter | 495 mm |
Internal Thread Size | M22 x 1,5 |
Type | Air Tank, compressed-air system |
Number of Connectors / Ports | 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | febi Plus |
Cable Length | 320 mm |
Number of Connectors / Ports | 2 |
Weight | 0.014 kg |
Type | Cable Repair Set, auxiliary water pump |
Function | Cable Repair Set, auxiliary water pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Lower, Rear Axle Right |
Length | 628 mm |
Function | Control/Trailing Arm, wheel suspension |
Pipe Diameter | 50 mm |
Steering arm type | Control Arm |
Weight | 12.2 kg |
Type | Control/Trailing Arm, wheel suspension |
Hole Spacing | 130 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right, Upper, Centre |
Material | Aluminium |
Steering arm type | Control Arm |
Weight | 0.879 kg |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.385 kg |
Height | 65 mm |
Filter type | Filter Insert |
Width | 179 mm |
Length | 310 mm |
Function | Air Filter |
Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Dust Cover Kit, shock absorber |
Function | Dust Cover Kit, shock absorber |
Placement on Vehicle | Front Axle |
Weight | 0.17 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Protective Cap/Bellow, shock absorber (174576)
- 2x Febi Rubber Buffer, suspension (104211)
Important compatibility info
Voltage | 12 V |
Number of Ribs | 7 |
Pulleys | with freewheel belt pulley |
Alternator Charge Current | 150 A |
Belt Pulley Diameter | 50 mm |
Weight | 6.78 kg |
Type | Alternator |
Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.62 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 308.5 mm |
Function | Inner Tie Rod |
External Thread Size | M14 x 1,5, M16 x 1,5 |
Extra Description | ProKit |
Type | Inner Tie Rod |
Additional Information | with counter nut |
for OE number | 56540-B4000 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Additional Information 2 | with screw |
for OE number | 98 109 610 80 |
Number of Connectors / Ports | 2 |
Weight | 0.010 kg |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Holder, wheel speed sensor |
Material | Aluminium |
Weight | 0.045 kg |
Function | Holder, wheel speed sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.398 kg |
Placement on Vehicle | Front Axle Right |
Length | 90 mm |
Material | Steel |
Paired article numbers | 21563 |
Internal Thread Size | M14 x 1,5 |
Function | Tie Rod End |
Type | Tie Rod End |
Additional Information | with counter nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Cast Steel |
Additional Information | with rubber mounts |
Weight | 1.600 kg |
Type | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Lower Front Axle, Left |
Additional Information 2 | with ball joint |
Steering arm type | Control Arm |
Function | Control/Trailing Arm, wheel suspension |
Paired article numbers | 05624 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (12088)
- 2x Febi Mounting, control/trailing arm (06170)
Important compatibility info
Brake caliper piston diameter | 34 mm |
Type | Brake Caliper |
Placement on Vehicle | Rear Axle Left |
Material | Cast Iron |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 178825 |
Weight | 1.99 kg |
Function | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Rubber Buffer, suspension |
Width | 67 mm |
Material | PU (Polyurethane) |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 90 mm |
Type | Rubber Buffer, suspension |
Weight | 0.076 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Lower |
Spanner Size | 21 |
Bolt Head/Nut Design | Male Hex |
Quality/ Grade | 10 |
Screw length below head | 90 mm |
Length | 103 mm |
Function | Mounting and Bolting Kit, control/trailing arm |
External Thread Size | M14 x 1,5 |
Steering arm type | Control Arm |
Weight | 0.185 kg |
Type | Mounting and Bolting Kit, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bolt, control arm (40159)
- 1x Febi Nut, ball joint (23696)
Important compatibility info
Weight | 0.165 kg |
Function | Tensioner, timing chain |
Operating Mode | Hydraulic |
Type | Tensioner, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.005 kg |
Outer diameter | 15 mm |
Thickness | 4 mm |
Function | Thrust Piece, intake/exhaust valve |
Type | Thrust Piece, intake/exhaust valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Brake Caliper Type | Brake Caliper (1 piston) |
Function | Brake Caliper |
Brake caliper piston diameter | 42 mm |
Material | Cast Iron |
Placement on Vehicle | Rear Axle Right |
Type | Brake Caliper |
Paired article numbers | 180911 |
Weight | 2.066 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Lower, Rear |
Paired article numbers | 193833 |
Weight | 0.360 kg |
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Holder, engine mounting system |
Function | Holder, engine mounting system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 1190 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Tensile Cord Material | Aramid |
Function | V-Ribbed Belt |
Type | V-Ribbed Belt |
Alternator type | for starter generator |
Weight | 0.113 kg |
Number of Ribs | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.090 kg |
Function | Gasket Set, steering gear |
Type | Gasket Set, steering gear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.462 kg |
Type | Mounting Kit, charger |
Function | Mounting Kit, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.035 kg |
Number of Connectors / Ports | 2 |
Switch Point | 95 °C. 90 °C |
Colour Coding | Blue |
Function | Temperature Switch, radiator fan |
Type | Temperature Switch, radiator fan |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023