Proud to be a UK-based company
Contact us
Important compatibility info
| External Thread Size | M12 x 1,25 |
| Weight | 0.310 kg |
| Additional Information | with lock nut |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Ball Joint |
| Cone Size | 17 mm |
| Extra Description | ProKit |
| Type | Ball Joint |
| Additional Information 2 | with retaining ring |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.237 kg |
| Function | Screw Set, gears (timing chain) |
| Type | Screw Set, gears (timing chain) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Screw (101125)
- 4x Febi Sliding Rail Bolts, timing chain (101126)
- 2x Febi Screw (101128)
- 1x Febi Quill, cylinder head (101129)
- 1x Febi Bolt, camshaft gear (46364)
£14.06
Important compatibility info
| Additional Information 2 | with pre-filter |
| Weight | 0.35 kg |
| Filter type | Filter Insert |
| Width | 232 mm |
| Length | 350 mm |
| Height | 44 mm |
| Function | Air Filter |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.14 kg |
| Placement on Vehicle | both sides |
| Length | 255 mm |
| Housing Diameter | 15 mm |
| Eject Force | 420 N |
| Stroke | 104 mm |
| Mounting points diameter | 8.3 mm |
| Piston conrod diameter | 6 mm |
| Type | Gas Spring, bonnet |
| Function | Gas Spring, bonnet |
| Housing length | 143.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.370 kg |
| Piston Diameter | 17 mm |
| Placement on Vehicle | Rear Axle Left |
| Material | Cast Iron |
| Paired article numbers | 23734 |
| Function | Wheel Brake Cylinder |
| Type | Wheel Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.04 kg |
| Placement on Vehicle | Rear |
| Material | FPM (fluoride rubber) |
| Outer diameter | 75 mm |
| Thickness | 10 mm |
| Inner diameter | 43 mm |
| Function | Shaft Seal, differential |
| Type | Shaft Seal, differential |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Length | 96 mm |
| Function | Linkage, door release |
| Weight | 0.08 kg |
| Type | Linkage, door release |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.080 kg |
| Material | Rubber |
| Function | Gasket, cylinder head cover |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Cooling Hose | from engine to engine cooler |
| Function | Radiator Hose |
| Weight | 0.28 kg |
| Placement on Vehicle | Lower Right |
| Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Placement on Vehicle | Front Axle |
| Material | PU (Polyurethane) |
| Function | Dust Cover Kit, shock absorber |
| Weight | 0.16 kg |
| Type | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (12488)
- 2x Febi Protective Cap/Bellow, shock absorber (12478)
£14.06
Important compatibility info
| Weight | 0.03 kg |
| Placement on Vehicle | transmission sided |
| Width | 8.8 mm |
| Material | PTFE (polytetrafluoroethylene) |
| Outer diameter | 105 mm |
| Inner diameter | 85 mm |
| Function | Shaft Seal, crankshaft |
| Type | Shaft Seal, crankshaft |
| Replaces | 11813 |
| Additional Information 2 | with mounting sleeve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.055 kg |
| Placement on Vehicle | Rear Axle |
| Length | 1243 mm |
| Colour | Black, Grey |
| Number of Connectors / Ports | 2 |
| Brake Type | Disc Brake |
| Function | Warning Contact, brake pad wear |
| Type | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Length | 150 mm |
| Inner diameter 1 | 24 mm |
| Inner diameter 2 | 95 mm |
| Function | Bellow Kit, drive shaft |
| Material | Rubber |
| Type | Bellow Kit, drive shaft |
| Weight | 0.3 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (14298)
- 1x Febi Clamping Clip (38757)
- 1x Febi Clamping Clip (45646)
- 2x Febi Molybdenum Grease (02582)
£14.06
Important compatibility info
| Weight | 0.43 kg |
| Placement on Vehicle | Rear Axle, Wheel Side, transmission sided |
| Function | Bellow Kit, drive shaft |
| Inner diameter 2 | 100 mm |
| Inner diameter 1 | 21 mm |
| Material | Rubber |
| Length | 96 mm |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (03362)
- 1x Febi Clamping Clip (38758)
- 6x Febi Bolt, drive shaft flange (03004)
- 1x Febi Spring Washer (07253)
- 1x Febi Circlip (03335)
- 1x Febi Molybdenum Grease (02582)
£14.06
Important compatibility info
| Length | 1162 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Weight | 0.175 kg |
| Function | V-Ribbed Belt |
| Number of Ribs | 10 |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Shape/Form | rectangular |
| Weight | 0.112 kg |
| Height | 62 mm |
| Length | 90 mm |
| Width | 64 mm |
| Material | Plastic |
| Colour | Black |
| Type | Lift Point Pad, jack |
| Function | Lift Point Pad, jack |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Material | Rubber |
| Function | Gasket, cylinder head cover |
| Weight | 0.070 kg |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.015 kg |
| for OE number | 129 545 02 24 |
| Function | Sensor, coolant level |
| Number of Connectors / Ports | 2 |
| Housing Colour | Black/White |
| Type | Sensor, coolant level |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Spanner Size | 80 |
| Function | Nut, kingpin |
| Thickness | 21.6 mm |
| Type | Nut, kingpin |
| Weight | 0.277 kg |
| Internal Thread Size | M60 x 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.600 kg |
| Additional Information | with nuts |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 195 mm |
| Material | Metal |
| Rod/Strut | Coupling Rod |
| Surface | Zinc-coated |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023