Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.215 kg |
| Placement on Vehicle | Front Axle, transmission sided |
| Function | Bellow Kit, drive shaft |
| Inner diameter 2 | 108 mm |
| Inner diameter 1 | 24 mm |
| Material | Rubber |
| Length | 129 mm |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (14069)
- 1x Febi Clamping Clip (38758)
- 1x Febi Molybdenum Grease (02582)
£14.06
Important compatibility info
| External Thread Size | M12 x 1,25 |
| Replaces | 41710 |
| Weight | 0.55 kg |
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Cone Size | 15.1 mm |
| Mounting points diameter | 12.2 mm |
| Type | Ball Joint |
| Function | Ball Joint |
| Additional Information 2 | with crown nut |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.43 kg |
| Placement on Vehicle | Rear Axle, Wheel Side, transmission sided |
| Function | Bellow Kit, drive shaft |
| Inner diameter 2 | 100 mm |
| Inner diameter 1 | 21 mm |
| Material | Rubber |
| Length | 96 mm |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (03362)
- 1x Febi Clamping Clip (38758)
- 6x Febi Bolt, drive shaft flange (03004)
- 1x Febi Spring Washer (07253)
- 1x Febi Circlip (03335)
- 1x Febi Molybdenum Grease (02582)
£14.06
Important compatibility info
| Weight | 0.04 kg |
| Placement on Vehicle | Rear |
| Material | FPM (fluoride rubber) |
| Outer diameter | 75 mm |
| Thickness | 10 mm |
| Inner diameter | 43 mm |
| Function | Shaft Seal, differential |
| Type | Shaft Seal, differential |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Valve stem diameter | 6.9 mm |
| Valve head diameter | 33.5 mm |
| Function | Intake Valve |
| Length | 113.3 mm |
| Weight | 0.075 kg |
| Type | Intake Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Placement on Vehicle | Left Rear |
| Length | 760 mm |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
| Weight | 0.214 kg |
| Paired article numbers | 34912 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Placement on Vehicle | Front Axle |
| Material | Rubber/Metal |
| Weight | 0.158 kg |
| Outer diameter | 82 mm. 64 mm |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Height | 34 mm |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Function | Gasket, cylinder head cover |
| Thickness | 9 mm |
| Material | NBR (nitrile butadiene rubber) |
| Width | 313 mm |
| Length | 505 mm |
| Weight | 0.052 kg |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Weight | 0.199 kg |
| Length | 70 mm |
| Width | 54 mm |
| Outer diameter | 41 mm |
| Thickness | 54 mm |
| Inner diameter | 16.5 mm |
| Function | Bushing, leaf spring |
| Type | Bushing, leaf spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Chemical Properties | Elastic |
| Weight | 0.11 kg |
| Length | 1029 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 6 |
| DIN / ISO | 7867 |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.244 kg |
| Placement on Vehicle | Lower Front Axle, Rear |
| Outer diameter | 59 mm. 24 mm |
| Thickness | 55 mm |
| Inner diameter | 12 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.248 kg |
| Length | 253 mm |
| Height | 36 mm |
| Width | 217 mm |
| Filter type | Filter Insert, Activated Carbon Filter |
| Type | Filter, cabin air |
| Function | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| External Thread Size | M10 x 1,5 |
| Function | Link/Coupling Rod, stabiliser bar |
| Rod/Strut | Suspension Rod |
| Material | Steel |
| Length | 310 mm |
| Placement on Vehicle | Front Axle Right |
| Weight | 0.406 kg |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Spanner Size | 80 |
| Function | Nut, kingpin |
| Thickness | 21.6 mm |
| Type | Nut, kingpin |
| Weight | 0.277 kg |
| Internal Thread Size | M60 x 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Material | Plastic |
| Operating Mode | Electric |
| Number of Connectors / Ports | 4 |
| Function | Stop Light Switch |
| Weight | 0.027 kg |
| Housing Colour | black |
| Type | Stop Light Switch |
| Replaces | 23618 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Function | Filter Set, cabin air |
| Type | Filter Set, cabin air |
| Weight | 0.160 kg |
| Width | 105 mm |
| Filter type | Pollen Filter |
| Height | 26 mm |
| Length | 250.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Material | Plastic, PA (polyamide) |
| Function | Guide, timing chain |
| Friction Lining Material | Plastic |
| Placement on Vehicle | Left |
| Weight | 0.118 kg |
| Type | Guide, timing chain |
| Hole Spacing | 214 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Cooling Hose | from engine to engine cooler |
| Function | Radiator Hose |
| Weight | 0.28 kg |
| Placement on Vehicle | Lower Right |
| Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Material | Aluminium |
| Additional Information 2 | without ball bearing |
| Inner diameter | 11 mm |
| Placement on Vehicle | Rear Axle |
| Replaces | 22986 |
| Weight | 0.28 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Hole Spacing | 102 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Additional Information | with fastening/mounting material |
| Weight | 1.0 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Ball Joint |
| Function | Ball Joint |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 300 mm |
| Function | Inner Tie Rod |
| Weight | 0.615 kg |
| External Thread Size | M12 x 1,5 |
| Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Thickness | 11 mm |
| Placement on Vehicle | frontal sided |
| Material | PTFE (polytetrafluoroethylene), ACM (Polyacrylate) |
| Weight | 0.052 kg |
| Inner diameter | 78 mm |
| Function | Shaft Seal, crankshaft |
| Outer diameter | 104 mm |
| Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.03 kg |
| Placement on Vehicle | transmission sided |
| Width | 8.8 mm |
| Material | PTFE (polytetrafluoroethylene) |
| Outer diameter | 105 mm |
| Inner diameter | 85 mm |
| Function | Shaft Seal, crankshaft |
| Type | Shaft Seal, crankshaft |
| Replaces | 11813 |
| Additional Information 2 | with mounting sleeve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.005 kg |
| Function | Sensor, intake air temperature |
| Outer diameter | 10 mm |
| Thickness | 52 mm |
| Number of Connectors / Ports | 2 |
| Type | Sensor, intake air temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.015 kg |
| for OE number | 129 545 02 24 |
| Function | Sensor, coolant level |
| Number of Connectors / Ports | 2 |
| Housing Colour | Black/White |
| Type | Sensor, coolant level |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Opening Pressure | 1.2 bar |
| Type | Cap, coolant tank |
| Material | Plastic |
| for OE number | 21360115 |
| Function | Cap, coolant tank |
| Weight | 0.05 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Shape/Form | rectangular |
| Weight | 0.112 kg |
| Height | 62 mm |
| Length | 90 mm |
| Width | 64 mm |
| Material | Plastic |
| Colour | Black |
| Type | Lift Point Pad, jack |
| Function | Lift Point Pad, jack |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Function | Wheel Brake Cylinder |
| Material | Aluminium |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Weight | 0.210 kg |
| Piston Diameter | 20.6 mm |
| Type | Wheel Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| External Thread Size | M10 x 1,5 |
| Length | 310 mm |
| Material | Steel |
| Rod/Strut | Suspension Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Weight | 0.406 kg |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.348 kg |
| Height | 160 mm |
| Width | 102 mm |
| Port / Connector type | DIN Connector |
| Fastening Type | 2-point attachment |
| DIN / ISO | 72591 |
| Number of circuits | 2 |
| Type | Holder, rotating beacon |
| Function | Holder, rotating beacon |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023