Important compatibility info
Placement on Vehicle | Front Axle, Wheel Side |
Length | 109 mm |
Material | Thermoplast |
Inner diameter 1 | 26 mm |
Inner diameter 2 | 78 mm |
Function | Bellow Kit, drive shaft |
Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (03596)
- 1x Febi Clamping Clip (38757)
- 1x Febi Clamping Clip (45642)
- 1x Febi Nut, kingpin (02160)
- 1x Febi Spring Washer (07254)
- 1x Febi Circlip (03185)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Spanner Size | 29 |
Number of Connectors / Ports | 3 |
Colour Coding | Grey |
Function | Temperature Switch, radiator fan |
External Thread Size | M22 x 1,5 |
Switching temperature range 2 from | 102 °C |
Switching temperature range 1 from | 95 °C |
Switching temperature range 1 to | 84 °C |
Type | Temperature Switch, radiator fan |
Additional Information 2 | with seal ring |
Switching temperature range 2 to | 92 °C |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 325 mm |
Function | Inner Tie Rod |
Type | Inner Tie Rod |
Additional Information | with counter nut |
External Thread Size | M12 x 1,5, M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with counter nut |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Inner Tie Rod |
External Thread Size | M16 x 1,5 |
Length | 238 mm |
Extra Description | ProKit |
Internal Thread Size | M16 x 1,5 |
Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mounting, engine |
Bearing/Mounting Type | Rubber-Metal Mount |
Placement on Vehicle | Right |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M10 x 1,25 |
Placement on Vehicle | Upper, Front Axle Left, Front Axle Right |
Function | Ball Joint |
Cone Size | 15 mm |
Type | Ball Joint |
Additional Information 2 | with retaining ring |
Steering arm type | for control arm |
Replaces | 41848 |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 75 mm |
Height | 54 mm |
Width | 75 mm |
Filter type | Filter Insert, Pre-Filter, with water separator |
Function | Fuel filter |
Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 1322 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 7 |
Function | V-Ribbed Belt |
Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M10 x 1,5 |
Length | 310 mm |
Material | Steel |
Rod/Strut | Suspension Rod |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M10 x 1,5 |
Function | Link/Coupling Rod, stabiliser bar |
Rod/Strut | Suspension Rod |
Material | Steel |
Length | 310 mm |
Placement on Vehicle | Front Axle Right |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 40 mm |
Colour | Blue |
Function | Sealing Cap, tank unit (Urea injection) |
Type | Sealing Cap, tank unit (Urea injection) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Brake Hose |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 535 mm |
Spanner Size | 11 |
Thread Length | 8 mm |
Internal Thread Size | M10 x 1 |
External Thread Size | M10 x 1 |
Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 271 mm |
Additional Information | with fastening/mounting material |
Function | Inner Tie Rod |
External Thread Size | M10 x 1,25 |
Type | Inner Tie Rod |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Injector Holder |
Type | Injector Holder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Injector Holder (28492)
- 1x Febi Seal, injector holder (29140)
- 1x Febi Screw, injection nozzle holder (28407)
- 1x Febi Seal, injector holder (29700)
Important compatibility info
Length | 106 mm |
Width | 64 mm |
Material | Plastic |
Colour | Black |
Function | Lift Point Pad, jack |
Height | 60 mm |
Extra Description | febi Plus |
Type | Lift Point Pad, jack |
Shape/Form | rectangular |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 93 mm |
Material | Rubber |
Inner diameter 1 | 26 mm |
Inner diameter 2 | 70 mm |
Type | Bellow Kit, drive shaft |
Function | Bellow Kit, drive shaft |
Joint Type | Tripod Joint |
Placement on Vehicle | Front Axle Right, transmission sided |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (173221)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Material | Steel |
Outer diameter | 84 mm |
Inner diameter | 81 mm |
Number of Teeth, ABS ring | 96 |
Type | Sensor Ring, ABS |
Function | Sensor Ring, ABS |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
for OE number | 77 00 800 522 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with nuts |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 158 mm |
Material | Steel |
Spanner Size | 19 |
Rod/Strut | Coupling Rod |
Colour | Black |
Surface | Painted |
Thread Length | 25 mm |
Function | Link/Coupling Rod, stabiliser bar |
Pipe Diameter | 12 mm |
External Thread Size | M12 x 1,25 |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | ACM (Polyacrylate) |
Function | Gasket, cylinder head cover |
Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle, transmission sided |
Function | Bellow Kit, drive shaft |
Inner diameter 2 | 108 mm |
Inner diameter 1 | 24 mm |
Material | Rubber |
Length | 129 mm |
Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (14069)
- 1x Febi Clamping Clip (38758)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Height | 232 mm |
Outer diameter | 109 mm |
Filter type | Spin-on Filter |
Function | Oil Filter |
Internal Thread Size | M30 x 2 |
Type | Oil Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Material | Rubber/Metal |
Outer diameter | 50 mm |
Thickness | 49.5 mm |
Inner diameter | 10 mm |
Function | Mounting, differential |
Type | Mounting, differential |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mount, exhaust system |
Material | MVQ (silicone rubber) |
Type | Mount, exhaust system |
for OE number | 18 20 7 578 238 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Switch, exterior mirror adjustment |
Function | Switch, exterior mirror adjustment |
Extra Description | febi Plus |
Placement on Vehicle | Interior Door Panel, Driver side |
Number of Connectors / Ports | 8 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 133.2 mm |
Width | 53 mm |
Wear Warning Contact | with acoustic wear warning |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 17.5 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Spanner Size | 19 |
Colour | Grey |
Number of Connectors / Ports | 2 |
Function | Sensor, coolant temperature |
Type | Sensor, coolant temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Link/Coupling Rod, stabiliser bar |
Placement on Vehicle | Rear Axle Left |
Length | 235 mm |
Rod/Strut | Coupling Rod |
Quality/ Grade | 10 |
Function | Link/Coupling Rod, stabiliser bar |
External Thread Size | M10 x 1,25 |
Extra Description | ProKit |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Inner diameter | 10 mm |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Length | 292 mm |
Colour | black |
Hole Spacing | 260 mm |
Material | Steel |
Type | Link/Coupling Rod, stabiliser bar |
Replaces | 41032 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear, inner, Lower, Front Axle Left, Front, Front Axle Right |
Outer diameter | 55 mm |
Thickness | 62 mm |
Function | Mounting, control/trailing arm |
Inner diameter | 17 mm |
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right, transmission sided |
Length | 96 mm |
Material | Rubber |
Function | Bellow Kit, drive shaft |
Type | Bellow Kit, drive shaft |
Inner diameter 1 | 24 mm |
Inner diameter 2 | 74 mm |
Joint Type | Tripod Joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (101856)
- 1x Febi Clamping Clip (38758)
- 1x Febi Clamping Clip (45637)
- 1x Febi High Temperature Lubricant (03630)
Important compatibility info
Type | Bellow Kit, steering |
Function | Bellow Kit, steering |
Inner diameter 2 | 46 mm |
Inner diameter 1 | 14 mm |
Material | Thermoplast |
Length | 188 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information 2 | with clamps |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Valve, crankcase ventilation |
Function | Valve, crankcase ventilation |
Placement on Vehicle | Right |
Extra Description | febi Plus |
Colour | Red, Black |
Material | FVMQ [fluorosilicone rubber), Plastic |
Additional Information
Technical Information
Kit contains 1 diaphragm and 1 cap. For the 8 cylinder 5ltr engine 2 diaphragms and 2 caps (1 per each cylinder bank) are needed. In this case please order 2 kits.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 2 |
Pump Type | Mono Pump |
Voltage | 12 V |
Function | Washer Fluid Pump, window cleaning |
Type | Washer Fluid Pump, window cleaning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Function | Ball Joint |
Additional Information | with nuts |
Type | Ball Joint |
Additional Information 2 | with bolts/screws |
Steering arm type | for control arm |
for OE number | 3640.48 S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ball Joint (19468)
- 3x Febi Nut (24361)
- 3x Febi Screw (24362)
Important compatibility info
Placement on Vehicle | Front Axle |
Material | Rubber/Metal |
Outer diameter | 27 mm |
Type | Bush, steering arm shaft |
Function | Bush, steering arm shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with counter nut |
Length | 246 mm |
for OE number | 32 21 6 762 243 SK |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Type | Inner Tie Rod |
External Thread Size | M14 x 1,5, M18 x 1,5 |
Function | Inner Tie Rod |
Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Spanner Size | 17 |
Thread Length | 26 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 167 mm |
Material | Steel |
Rod/Strut | Coupling Rod |
Colour | Black |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
External Thread Size | M10 x 1,5 |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information 2 | with washers |
Pipe Diameter | 10 mm |
Additional Information | with nuts, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Ball Joint |
Cone Size | 20 mm |
Type | Ball Joint |
Additional Information 2 | with retaining ring |
Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Teeth | 44 |
Engine Management | Timing Belt |
Function | Gear/Sprocket, camshaft |
Type | Gear/Sprocket, camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Paper |
Outer diameter | 57 mm. 84 mm |
Inner diameter | 38 mm |
Filter type | Filter Insert |
Colour | White |
Function | Fuel filter |
Height | 185 mm |
Type | Fuel filter |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M14 x 1,5 |
Additional Information | with counter nut |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 310 mm |
Function | Inner Tie Rod |
Extra Description | ProKit |
Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 175 mm |
Outer diameter | 97 mm |
Filter type | Spin-on Filter |
Function | Oil Filter |
Replaces | 38973 |
Type | Oil Filter |
Internal Thread Size | M27 x 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 1264 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 6 |
Function | V-Ribbed Belt |
Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Internal Thread Size | M14 x 1,5 |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 104 mm |
Thickness | 75 mm |
Function | Tie Rod End |
Spanner Size | 22 |
External Thread Size | M14 x 1,5 |
Extra Description | ProKit |
Type | Tie Rod End |
Replaces | 41921 |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 334 mm |
Height | 40 mm |
Width | 238 mm |
Filter type | Pollen Filter |
Function | Filter, cabin air |
Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Number of Connectors / Ports | 2 |
Brake Type | Disc Brake |
Cable Length | 875 mm |
Type | Warning Contact, brake pad wear |
Function | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with nuts |
Steering arm type | for control arm |
Additional Information 2 | with bolts/screws |
Placement on Vehicle | Lower, Front Axle Left, Front Axle Right |
Inner diameter | 10.5 mm |
Function | Ball Joint |
Type | Ball Joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Thermoplastic polyester elastomer |
Type | Lift Point Pad, jack |
Function | Lift Point Pad, jack |
Extra Description | febi Plus |
Colour | Black |
Shape/Form | round |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Rubber Mount, muffler |
Function | Rubber Mount, muffler |
Material | MVQ (silicone rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023