Important compatibility info
| Type | Air Filter |
| Inner diameter | 254 mm |
| Filter type | Filter Insert |
| Height | 317 mm |
| Function | Air Filter |
| Outer diameter | 420 mm |
| Additional Information 2 | with nut |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Air Suspension Valve / Valve, driver cab suspension |
| Placement on Vehicle | Front |
| Type | Air Suspension Valve / Valve, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rod/Strut | Push Rod |
| Outer diameter | 53 mm |
| Length | 846 mm |
| Cone Size | 26 mm |
| Pipe Diameter | 48 mm |
| Function | Centre Rod Assembly |
| Driver Position | for right-hand drive vehicles |
| Internal Thread Size | M30 x 1,5 RHT |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| External Thread Size | M20 x 1,5 |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Thermostat, coolant |
| Opening Temperature | 79 °C |
| Heating / Cooling | with vent hole |
| Type | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Thermostat, coolant (24643)
- 1x Febi Gasket, water pump (03505)
Important compatibility info
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 406 mm |
| Min. Length | 360 mm |
| Mounting points diameter | 14 mm |
| Operating Mode | Pneumatic |
| Piston conrod diameter | 14 mm |
| Placement on Vehicle | Rear |
| Function | Shock Absorber, driver cab suspension |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Centre Rod Assembly |
| Outer diameter | 40 mm |
| Cone Size | 26.2 mm |
| Driver Position | for right-hand drive vehicles |
| Rod/Strut | Push Rod |
| Length | 730 mm |
| Placement on Vehicle | Front Axle |
| Extra Description | ProKit |
| Internal Thread Size | M30 x 1,5 RHT |
| External Thread Size | M20 x 1,5 |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Washer Fluid Pump, window cleaning |
| Pump Type | Mono Pump |
| Number of Connectors / Ports | 2 |
| Voltage | 24 V |
| Type | Washer Fluid Pump, window cleaning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rod/Strut | Push Rod |
| Length | 895 mm |
| Cone Size | 24 mm |
| Function | Centre Rod Assembly |
| External Thread Size | M20 x 1,5 |
| Outer diameter | 40 mm |
| Additional Information | with nuts |
| Extra Description | ProKit |
| Internal Thread Size | M30 x 1,5 RHT |
| Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Internal Thread Size | M30 x 1,5 RHT |
| External Thread Size | M27 x 1,5, M24 x 1,5 |
| Function | Centre Rod Assembly |
| Cone Size | 32 mm. 30 mm |
| Rod/Strut | Push Rod |
| Outer diameter | 38 mm |
| Length | 885 mm |
| Extra Description | ProKit |
| Additional Information | with nuts |
| Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with switch, with bolts/screws |
| Type | Steering Lock |
| Function | Steering Lock |
| Lock System | with two keys, with lock barrel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inner diameter | 20 mm |
| Function | Mounting, stabiliser bar |
| Thickness | 41 mm |
| Outer diameter | 52 mm |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front and Rear, Front Axle |
| Length | 95 mm |
| Material | Rubber/Metal |
| Outer diameter | 44 mm |
| Inner diameter | 16 mm |
| Type | Bush, spring eye |
| Function | Bush, spring eye |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Bushing, leaf spring |
| Inner diameter | 20 mm |
| Outer diameter | 54 mm |
| Material | Rubber/Metal |
| Length | 96 mm |
| Placement on Vehicle | Front and Rear, Rear Axle |
| Type | Bushing, leaf spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Plastic |
| Paired article numbers | 26942 |
| Colour | Black |
| Placement on Vehicle | Right |
| Function | Exterior Door Handle |
| Type | Exterior Door Handle |
| Lock System | without lock barrel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 154 mm |
| Thickness | 170 mm |
| Inner diameter | 107 mm |
| Function | Mounting, leaf spring |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Type | Mounting, leaf spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Additional Information 2 | with spacer disc |
| Type | Mounting, leaf spring |
| Function | Mounting, leaf spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, leaf spring (26946)
- 1x Febi Spacer Ring, spring link console (26947)
Important compatibility info
| Cone Size | 29 mm |
| Pipe Diameter | 56 mm |
| Function | Angled Ball Joint, steering push rod |
| Thread Type | with right-hand thread |
| Outer diameter | 56 mm |
| Length | 115 mm |
| Extra Description | ProKit |
| Type | Angled Ball Joint, steering push rod |
| External Thread Size | M20 x 1,5, M30 x 1,5 RHT |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 322 mm |
| Thickness | 90 mm |
| Brake Disc Thickness | 30 mm |
| Brake Disc Type | Internally Vented |
| Minimum thickness | 27 mm |
| Bolt Hole Circle Diameter | 154 mm |
| Surface | Coated |
| Function | Brake Disc |
| Rim Hole Number | 6 -Hole |
| Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 160 mm |
| Outer diameter | 109 mm |
| Filter type | Spin-on Filter, with water separator |
| Function | Fuel filter |
| Internal Thread Size | 1 1/4" - UNS - 2B |
| External Thread Size | M95 x 2,5 |
| Type | Fuel filter |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Gasket Set, wheel hub |
| Type | Gasket Set, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Shaft Seal, wheel hub (27094)
- 1x Febi Seal, axle cap (17937)
- 8x Febi Screw (27092)
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















