Important compatibility info
Length | 900 mm |
Thread Size | M24 x 1,5 |
Rod/Strut | Push Rod |
Weight | 14.800 kg |
Cone Size | 30 mm |
Adjustable | Adjustable on one side |
Pipe Diameter | 62 mm |
Bolt / Nut Version | with ENKO® lock nut |
Type | Centre Rod Assembly |
Function | Centre Rod Assembly |
Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 244 mm |
Height | 30 mm |
Length | 289 mm |
Weight | 0.098 kg |
Function | Filter, cabin air |
Filter type | Pollen Filter |
Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Thread Size | M20x1,5 |
External Teeth, Wheel Side | 38 |
Weight | 12.311 kg |
External Teeth, Diff.Side | 25 |
Min. Length | 880 mm |
Wheel Sided Joint Diameter | 106 mm |
Transmission-side joint diameter | 108 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left Rear |
Length | 1377 mm |
Paired article numbers | 176827 |
Weight | 0.625 kg |
Type | Cable Pull, parking brake |
Function | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Length | 70 mm |
Diameter | 1 mm |
Additional Information | with nuts |
Material | Steel |
Paired article numbers | 194952 |
Rod/Strut | Coupling Rod |
Thread Length | 30 mm |
Weight | 0.476 kg |
Type | Link/Coupling Rod, stabiliser bar |
Function | Link/Coupling Rod, stabiliser bar |
External Thread Size | M12 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Belt Tensioner, v-ribbed belt |
Weight | 0.731 kg |
Width of castor bearing surface | 26 mm |
Width | 43 mm |
Material | Metal |
Outer diameter | 65 mm |
Operating Mode | Automatic |
Function | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.200 kg |
Paired article numbers | 21922 |
Rod/Strut | Coupling Rod |
Placement on Vehicle | Front Axle Left |
Internal Thread Size | M10 x 1,5 |
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
Length | 125 mm |
Height | 32 mm |
Material | Aluminium |
Thickness | 38 mm |
Spanner Size | 13 |
Hole Spacing | 90 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 237 mm |
Material | Steel |
External Thread Size | M10 x 1,5 |
Rod/Strut | Coupling Rod |
Weight | 0.218 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Link/Coupling Rod, stabiliser bar |
Thread Length | 22 mm |
Thickness | 55 mm |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Brake Caliper |
Placement on Vehicle | Rear Axle Left |
Material | Cast Aluminium |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 178932 |
Weight | 1.368 kg |
Function | Brake Caliper |
Brake caliper piston diameter | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Rubber Buffer, suspension |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 93 mm |
Width | 70 mm |
Type | Rubber Buffer, suspension |
Material | PU (Polyurethane) |
Weight | 0.107 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter 2 | 59 mm |
Outer diameter 1 | 42 mm |
Number of Holes | 4 |
Thickness | 72 mm |
Outer diameter | 116 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Wheel Hub |
Weight | 1.4 kg |
Type | Wheel Hub |
Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.049 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 740 mm |
Brake Type | Disc Brake |
Function | Warning Contact, brake pad wear |
Type | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.56 kg |
Function | Tensioner, timing chain |
for OE number | 615 050 08 11 |
Type | Tensioner, timing chain |
Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber |
Inner diameter | 16 mm |
Placement on Vehicle | Front Axle, inner |
Weight | 0.03 kg |
Function | Mounting, stabiliser bar |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M12 x 1,5 |
Placement on Vehicle | Front Axle Right |
Function | Tie Rod |
Type | Tie Rod |
Weight | 1.019 kg |
Paired article numbers | 180913 |
Internal Thread Size | M14 x 1,5 |
Additional Information
Technical Information
After replacement, the optical driver assistance systems (cameras, radar, etc.) may need to be recalibrated. Please observe the manufacturer's instructions.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (19814)
- 1x Febi Inner Tie Rod (106503)
Important compatibility info
Function | Sensor, intake manifold pressure |
Type | Sensor, intake manifold pressure |
Weight | 0.05 kg |
Number of Connectors / Ports | 4 |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.63 kg |
Wet Sump Material | Steel |
Function | Oil sump |
Extra Description | febi Plus |
Type | Oil sump |
Additional Information | with oil drain plug |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil sump (14720)
- 1x Febi Screw Plug, oil sump (12281)
Important compatibility info
Weight | 0.234 kg |
Type | Mounting Kit, charger |
Function | Mounting Kit, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Bearing/Mounting Type | Hydro Mount |
Function | Mounting, engine |
Material | Rubber/Metal |
Placement on Vehicle | Left |
Type | Mounting, engine |
Weight | 0.819 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 5.15 kg |
Placement on Vehicle | Rear Axle |
Width | 44.4 mm |
Outer diameter | 211.8 mm |
Thickness | 80.7 mm |
Inner diameter | 180 mm |
Bolt Hole Circle Diameter | 108 mm |
Centering Diameter | 51.9 mm |
Max.skimmed drum measure | 181.25 mm |
Function | Brake Drum |
Rim Hole Number | 4 -Hole |
Type | Brake Drum |
Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.125 kg |
Outer diameter | 145 mm. 155 mm |
Thickness | 51 mm |
Inner diameter | 19 mm |
Number of Ribs | 8 |
Parameter | 5PK + 5PK |
Function | Belt Pulley, crankshaft |
Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.032 kg |
Relay Number | 21, 191 |
Material | Plastic |
Voltage | 12 V |
Operating Mode | Electronic |
Colour | Black |
Number of Connectors / Ports | 3 |
Rated Power | 21 W |
Function | Flasher Unit |
Type | Flasher Unit |
Replaces | 04633 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.093 kg |
Placement on Vehicle | Rear Axle Left |
Number of Connectors / Ports | 2 |
Cable Length | 710 mm |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Paired article numbers | 175911 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Piston Diameter | 25.4 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Material | Grey Cast Iron |
Function | Wheel Brake Cylinder |
Weight | 0.45 kg |
Type | Wheel Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Repair Kit, suspension strut support mount |
Type | Repair Kit, suspension strut support mount |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Material | Rubber/Metal |
Additional Information 2 | with ball bearing |
Weight | 0.360 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Spanner Size | 22 |
Weight | 0.105 kg |
Cable Length | 471 mm |
Number of circuits | 4 |
Lambda Sensor | Heated, Diagnostic Probe |
Type | Oxygen Sensor |
Function | Oxygen Sensor |
External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with gasket/seal |
Weight | 0.043 kg |
Function | Coolant Flange |
Type | Coolant Flange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | febi Plus |
Paired article numbers | 181577 |
Placement on Vehicle | Right |
Screw length below head | 761 mm |
Number of Teeth | 26 |
Length | 811 mm |
Outer diameter | 97 mm |
Type | Brake Shaft, drum brake |
Weight | 9.0 kg |
Function | Brake Shaft, drum brake |
Brake Shaft Cam | S-cam |
Shape/Form | S Shape |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Brake System | ATE |
Weight | 0.107 kg |
Placement on Vehicle | Front Axle |
Function | Accessory Kit, disc brake pad |
Type | Accessory Kit, disc brake pad |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 169 mm |
Width | 59.8 mm |
Wear Warning Contact | incl. wear warning contact |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 18 mm |
Function | Brake Pad Set, disc brake |
Weight | 1.3 kg |
Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023