Important compatibility info
| Operating Mode | Hydraulic |
| Function | Tappet |
| Outer diameter | 30 mm |
| Thickness | 24 mm |
| for OE number | 0942.55 |
| Type | Tappet |
| Placement on Vehicle | Intake Side, Exhaust Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Ignition Coil |
| Number of Connectors / Ports | 6 |
| Ignition Coil | 4 Spark |
| Type | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 50 mm |
| Number of Connectors / Ports | 3 |
| Function | Sensor, camshaft position |
| Outer diameter | 17.8 mm |
| Length | 51 mm |
| Type | Sensor, camshaft position |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Paired article numbers | 36436 |
| Rod/Strut | Guide Rod |
| Function | Rod/Strut, wheel suspension |
| Type | Rod/Strut, wheel suspension |
| Hole Spacing | 420 mm |
| Additional Information | with rubber-metal mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Paired article numbers | 36435 |
| Rod/Strut | Guide Rod |
| Function | Rod/Strut, wheel suspension |
| Type | Rod/Strut, wheel suspension |
| Additional Information | with rubber-metal mount |
| Hole Spacing | 420 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 539 mm |
| Function | Brake Hose |
| Spanner Size | 17 |
| Internal Thread Size | M10 x 1 |
| Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Teeth | 132 |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (36300)
- 1x Febi Water Pump, engine cooling (21239)
- 1x Febi Camshaft Adjuster (36415)
Important compatibility info
| Minimum thickness | 20 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Surface | Coated |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 330 mm |
| Brake Disc Thickness | 22 mm |
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Centering Diameter | 68 mm |
| Number of mounting bores | 1 |
| for OE number | 8K0 615 601 C |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Function | Brake Hose |
| Length | 469 mm |
| Internal Thread Size | M10 x 1 |
| Type | Brake Hose |
| External Thread Size | M10 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Thermostat, coolant |
| Opening Temperature | 87 °C |
| Thickness | 85 mm |
| Outer diameter 2 | 66 mm |
| Seal Material | NBR (nitrile butadiene rubber) |
| Outer diameter 1 | 43 mm |
| Type | Thermostat, coolant |
| Additional Information | with gasket/seal |
| for OE number | 111 200 09 15 |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rotor Style | Solid |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 300 mm |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Thickness | 36.2 mm |
| Brake Disc Thickness | 12 mm |
| Minimum thickness | 10 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 617 mm |
| Function | Brake Hose |
| Internal Thread Size | M10 x 1 |
| External Thread Size | M10 x 1 |
| Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 404 mm |
| Function | Brake Hose |
| External Thread Size | M10 x 1 |
| Type | Brake Hose |
| Internal Thread Size | M10 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 390 mm |
| Function | Brake Hose |
| External Thread Size | M10 x 1 |
| Internal Thread Size | M10 x 1 |
| Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 586 mm |
| Function | Brake Hose |
| Spanner Size | 14 |
| External Thread Size | M10 x 1 |
| Internal Thread Size | M10 x 1 |
| Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 377 mm |
| Function | Brake Hose |
| External Thread Size | M10 x 1 |
| Internal Thread Size | M10 x 1 |
| Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 547 mm |
| Spanner Size | 14 |
| Function | Brake Hose |
| Internal Thread Size | M10 x 1 |
| External Thread Size | M10 x 1 |
| Type | Brake Hose |
| Replaces | 18627 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Brake Hose |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 552 mm |
| Type | Brake Hose |
| Internal Thread Size | M10 x 1 |
| External Thread Size | M10 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 396 mm |
| Spanner Size | 14 |
| Function | Brake Hose |
| External Thread Size | M10 x 1 |
| Internal Thread Size | M10 x 1 |
| Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Internal Thread Size | M10 x 1 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 326 mm |
| Spanner Size | 14 |
| Function | Brake Hose |
| External Thread Size | M10 x 1 |
| Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M10 x 1 |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 243 mm |
| Function | Brake Hose |
| Internal Thread Size | M10 x 1 |
| Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Tensioner, timing chain |
| Type | Tensioner, timing chain |
| Operating Mode | Hydraulic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Switch point to | 0.5 bar |
| Spanner Size | 24 |
| Switch point from | 0.2 bar |
| Function | Oil Pressure Switch |
| Number of Connectors / Ports | 1 |
| Colour | Black |
| External Thread Size | M12 x 1,5 |
| Type | Oil Pressure Switch |
| Length | 52 mm |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 140 mm |
| Filter type | Activated Carbon Filter |
| Height | 30 mm |
| Length | 174 mm |
| Type | Filter Set, cabin air |
| Function | Filter Set, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 104 mm |
| Valve stem diameter | 6 mm |
| Notches / Holes Number | 3 |
| Function | Intake Valve |
| Type | Intake Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Spanner Size | 24 |
| Colour | Blue |
| Function | Oil Pressure Switch |
| Switch point to | 0.35 bar |
| Switch point from | 0.15 bar |
| External Thread Size | M12 x 1,5 |
| Type | Oil Pressure Switch |
| Additional Information 2 | with seal ring |
| Number of Connectors / Ports | 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 91.1 mm |
| Notches / Holes Number | 3 |
| Function | Intake Valve |
| Type | Intake Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | transmission sided, Rear Axle |
| Length | 98 mm |
| Material | Rubber |
| Inner diameter 1 | 30 mm |
| Inner diameter 2 | 60 mm |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Clamping Clip (38764)
- 1x Febi Clamping Clip (38759)
- 1x Febi Molybdenum Grease (08414)
- 1x Febi Bellow, drive shaft (36512)
- 1x Febi Nut, kingpin (02346)
- 1x Febi Nut, kingpin (01841)
- 1x Febi Circlip (02596)
Important compatibility info
| Length | 110 mm |
| Material | Thermoplast |
| Inner diameter 1 | 27 mm |
| Function | Bellow Kit, drive shaft |
| Inner diameter 2 | 76 mm |
| Placement on Vehicle | Wheel Side, Front Axle |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (36520)
- 1x Febi Clamping Clip (45642)
- 1x Febi Clamping Clip (38757)
- 1x Febi Molybdenum Grease (08414)
Important compatibility info
| Length | 80 mm |
| Width | 64 mm |
| Thickness | 4.5 mm |
| Function | Seal, thermostat |
| Type | Seal, thermostat |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | PU (Polyurethane) |
| Placement on Vehicle | Front Axle |
| Function | Rubber Buffer, suspension |
| Length | 85 mm |
| Width | 60 mm |
| Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | PU (Polyurethane) |
| Length | 100 mm |
| Placement on Vehicle | Front Axle |
| Function | Rubber Buffer, suspension |
| Width | 61 mm |
| Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Rubber Buffer, suspension |
| Material | PU (Polyurethane) |
| Length | 78 mm |
| Width | 61 mm |
| Placement on Vehicle | Front Axle |
| Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Opening Temperature | 95 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Gasket Set, cylinder head cover |
| Material | ACM (Polyacrylate) |
| Type | Gasket Set, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | transmission sided, Rear Axle |
| Length | 94 mm |
| Material | Rubber |
| Inner diameter 1 | 23 mm |
| Inner diameter 2 | 100 mm |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (36549)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
| Placement on Vehicle | transmission sided, Rear Axle |
| Material | Rubber |
| Function | Bellow Kit, drive shaft |
| Length | 77 mm |
| Type | Bellow Kit, drive shaft |
| Inner diameter 1 | 23 mm |
| Inner diameter 2 | 52 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (36551)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
| Placement on Vehicle | Wheel Side, Rear Axle |
| Material | Rubber |
| Function | Bellow Kit, drive shaft |
| Inner diameter 2 | 51 mm |
| Inner diameter 1 | 31 mm |
| Type | Bellow Kit, drive shaft |
| Length | 78 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (36555)
- 2x Febi High Temperature Lubricant (03630)
Important compatibility info
| Placement on Vehicle | Wheel Side, Rear Axle |
| Material | Rubber |
| Function | Bellow Kit, drive shaft |
| Length | 77 mm |
| Type | Bellow Kit, drive shaft |
| Inner diameter 1 | 23 mm |
| Inner diameter 2 | 52 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (36556)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
| Placement on Vehicle | Wheel Side, Rear Axle |
| Material | Rubber |
| Function | Bellow Kit, drive shaft |
| Inner diameter 2 | 57 mm |
| Inner diameter 1 | 25 mm |
| Length | 70 mm |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (36557)
- 1x Febi High Temperature Lubricant (03630)
Important compatibility info
| Outer diameter | 82 mm |
| Height | 128 mm |
| Function | Fuel filter |
| Filter type | Filter Insert |
| Type | Fuel filter |
| Additional Information 2 | with seal ring |
| Inner diameter | 19 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Oil Filter |
| Type | Oil Filter |
| Height | 89 mm |
| Outer diameter | 62 mm |
| Filter type | Filter Insert |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Rubber |
| Placement on Vehicle | Front Axle |
| Inner diameter 1 | 23 mm |
| Outer diameter | 59 mm |
| Length | 70 mm |
| Function | Rubber Buffer, suspension |
| Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left |
| Length | 460 mm |
| Width | 164 mm |
| Material | NBR (nitrile butadiene rubber) |
| Thickness | 24 mm |
| Function | Gasket, cylinder head cover |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 175 mm |
| Material | NBR (nitrile butadiene rubber) |
| Thickness | 24 mm |
| Function | Gasket, cylinder head cover |
| Placement on Vehicle | Right |
| Length | 462 mm |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Additional Information 2 | with splash protection cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Teeth | 22 |
| Engine Management | Timing Belt |
| for OE number | 074 105 263 B |
| Function | Sprocket, crankshaft |
| Type | Sprocket, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 180 mm |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Material | Metal |
| Type | Link/Coupling Rod, stabiliser bar |
| Inner diameter | 12 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 4 |
| Ignition Coil | 4 Spark |
| Function | Ignition Coil |
| Type | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Thickness | 160 mm |
| Material | PE (Polyethylene) |
| Function | Protective Cap/Bellow, shock absorber |
| Type | Protective Cap/Bellow, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































