Proud to be a UK-based company
Contact us
Important compatibility info
| Thickness | 11 mm |
| Placement on Vehicle | frontal sided |
| Material | PTFE (polytetrafluoroethylene), ACM (Polyacrylate) |
| Inner diameter | 78 mm |
| Function | Shaft Seal, crankshaft |
| Outer diameter | 104 mm |
| Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Material | PP (Polypropylene) |
| Colour | Black |
| Function | Cap, gear lever knob |
| Type | Cap, gear lever knob |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Placement on Vehicle | Left Rear, Right Rear |
| Length | 1666 mm |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Wet Boiling Point | 250 °C |
| Length | 1215 mm |
| Extra Description | febi Plus |
| Function | Oil Dipstick, automatic transmission |
| Length from grip collar to min. marking | 1144 mm. 1095 mm |
| Length from grip collar to max. marking | 1133 mm. 1089 mm |
| Colour | Red |
| Type | Oil Dipstick, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Lower |
| Additional Information 2 | with ball bearing |
| Type | Repair Kit, suspension strut support mount |
| Function | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Rolling Bearing, suspension strut support mount (10091)
- 1x Febi Suspension Strut Support Mount (47358)
£14.06
Important compatibility info
| Internal Thread Size | M14 x 1,5 |
| External Thread Size | M10 x 1,25 |
| Placement on Vehicle | Front Axle Right |
| Length | 110 mm |
| Thickness | 68 mm |
| Spanner Size | 17 |
| Paired article numbers | 42720 |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle |
| Length | 128 mm |
| Material | Thermoplast |
| Inner diameter 1 | 40 mm |
| Inner diameter 2 | 97 mm |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (100001)
- 1x Febi Clamping Clip (45645)
- 2x Febi Molybdenum Grease (02582)
- 1x Febi Clamping Clip (101027)
£14.06
Important compatibility info
| Function | Bellow Kit, drive shaft |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Material | Thermoplast |
| Type | Bellow Kit, drive shaft |
| Length | 107 mm |
| Inner diameter 1 | 40 mm |
| Inner diameter 2 | 95 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Clamping Clip (45645)
- 1x Febi Clamping Clip (38760)
- 1x Febi High Temperature Lubricant (03630)
- 1x Febi Circlip (24138)
£14.06
Important compatibility info
| Placement on Vehicle | Rear |
| Material | FPM (fluoride rubber) |
| Outer diameter | 75 mm |
| Thickness | 10 mm |
| Inner diameter | 43 mm |
| Function | Shaft Seal, differential |
| Type | Shaft Seal, differential |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Length | 100 mm |
| Material | Rubber |
| Inner diameter 2 | 70 mm |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
| Inner diameter 1 | 25 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (100429)
- 1x Febi Clamping Clip (38758)
- 1x Febi Clamping Clip (45643)
- 1x Febi High Temperature Lubricant (03630)
£14.06
Important compatibility info
| Length | 1264 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 6 |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Chemical Properties | Elastic |
| Length | 1029 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 6 |
| DIN / ISO | 7867 |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| External Thread Size | M12 x 1,25 |
| Replaces | 41710 |
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Cone Size | 15.1 mm |
| Mounting points diameter | 12.2 mm |
| Type | Ball Joint |
| Function | Ball Joint |
| Additional Information 2 | with crown nut |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Additional Information 2 | with retaining ring |
| Placement on Vehicle | Front Axle Left, Upper, Front Axle Right |
| Function | Ball Joint |
| Extra Description | ProKit |
| Type | Ball Joint |
| Steering arm type | for control arm |
| External Thread Size | M12 x 1,25 |
| Additional Information | with crown nut and split pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| External Thread Size | M10 x 1,25 |
| Function | Tie Rod End |
| Length | 110 mm |
| Thickness | 68 mm |
| Spanner Size | 17 |
| Paired article numbers | 42721 |
| Placement on Vehicle | Front Axle Left |
| Extra Description | ProKit |
| Internal Thread Size | M14 x 1,5 |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Inner diameter | 27 mm |
| Function | Mounting, stabiliser bar |
| Material | Rubber |
| Placement on Vehicle | Front Axle |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Placement on Vehicle | Right |
| Length | 362 mm |
| Width | 165 mm |
| Function | Gasket, cylinder head cover |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Length | 1427 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 8 |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Material | FPM (fluoride rubber) |
| Outer diameter | 125 mm |
| Thickness | 12 mm |
| Inner diameter | 105 mm |
| Function | Shaft Seal, manual transmission |
| Type | Shaft Seal, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Length | 1330 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 9 |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Length | 1162 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Function | V-Ribbed Belt |
| Number of Ribs | 10 |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Length | 1045 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 10 |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Material | PA (polyamide) |
| Function | Guide, timing chain |
| Friction Lining Material | Plastic |
| Placement on Vehicle | Left |
| Type | Guide, timing chain |
| Hole Spacing | 214 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Cooling Hose | from engine to engine cooler |
| Function | Radiator Hose |
| Placement on Vehicle | Lower Right |
| Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 204 mm |
| Material | Steel |
| Outer diameter | 16 mm |
| Inner diameter | 12.4 mm |
| Paired article numbers | 48043 |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| External Thread Size | M10 x 1,25 |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information 2 | with nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Shape/Form | rectangular |
| Height | 62 mm |
| Length | 90 mm |
| Width | 64 mm |
| Material | Plastic |
| Colour | Black |
| Type | Lift Point Pad, jack |
| Function | Lift Point Pad, jack |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Length | 114 mm |
| Material | Thermoplast |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
| Inner diameter 1 | 29 mm |
| Inner diameter 2 | 96 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (48815)
- 1x Febi Clamping Clip (29816)
- 1x Febi Clamping Clip (45645)
- 2x Febi Molybdenum Grease (02582)
£14.06
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, Rear |
| Length | 77 mm |
| Material | Rubber/Metal |
| Outer diameter | 46 mm |
| Inner diameter | 15 mm |
| Function | Bushing, leaf spring |
| Type | Bushing, leaf spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Additional Information 2 | with pre-filter |
| Filter type | Filter Insert |
| Width | 232 mm |
| Length | 350 mm |
| Height | 44 mm |
| Function | Air Filter |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Function | Suspension Strut Support Mount |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Material | Rubber/Metal |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Placement on Vehicle | transmission sided |
| Width | 8.8 mm |
| Material | PTFE (polytetrafluoroethylene) |
| Outer diameter | 105 mm |
| Inner diameter | 85 mm |
| Function | Shaft Seal, crankshaft |
| Type | Shaft Seal, crankshaft |
| Replaces | 11813 |
| Additional Information 2 | with mounting sleeve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Spanner Size | 80 |
| Function | Nut, kingpin |
| Thickness | 21.6 mm |
| Type | Nut, kingpin |
| Internal Thread Size | M60 x 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Length | 396 mm |
| Height | 38 mm |
| Width | 177 mm |
| Material | NBR (nitrile butadiene rubber) |
| Type | Gasket, cylinder head cover |
| Function | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Cooling Hose | from coolant regulator housing to engine cooler |
| Function | Radiator Hose |
| Type | Radiator Hose |
| for OE number | 1351.RE SK |
| Placement on Vehicle | Lower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Height | 140 mm |
| Outer diameter | 60 mm |
| Inner diameter | 29 mm |
| Filter type | Filter Insert |
| Function | Hydraulic Filter, steering |
| Inner diameter 1 | 18 mm |
| Type | Hydraulic Filter, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Function | Hydraulic Filter, automatic transmission |
| Height | 73 mm |
| Type | Hydraulic Filter, automatic transmission |
| Width | 126 mm |
| Filter type | Screen Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Additional Information 2 | with oil sump gasket |
| Height | 46 mm |
| Length | 244 mm |
| Width | 152 mm |
| Function | Hydraulic Filter Kit, automatic transmission |
| Type | Hydraulic Filter Kit, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Opening Pressure | 1.2 bar |
| Type | Cap, coolant tank |
| Material | Plastic |
| for OE number | 21360115 |
| Function | Cap, coolant tank |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Extra Description | ProKit |
| External Thread Size | M10 x 1,5 |
| Spanner Size | 17 |
| Additional Information 2 | with nut |
| Length | 57 mm |
| Function | Ball Head, gearshift linkage |
| Type | Ball Head, gearshift linkage |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Outer diameter | 153 mm |
| Type | Shaft Seal, crankshaft |
| Material | PTFE (polytetrafluoroethylene) |
| Width | 13 mm |
| Placement on Vehicle | frontal sided |
| Inner diameter | 135 mm |
| Function | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Additional Information 2 | with mounting sleeve |
| Placement on Vehicle | frontal sided |
| Width | 10 mm |
| Material | PTFE (polytetrafluoroethylene), AEM (Ethylene Acrylate Rubber) |
| Outer diameter | 79 mm |
| Inner diameter | 65 mm |
| Rotation Direction | Clockwise rotation |
| Type | Shaft Seal, crankshaft |
| Function | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Additional Information | with fastening/mounting material |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Ball Joint |
| Function | Ball Joint |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Width | 10 mm |
| Outer diameter | 111 mm |
| Inner diameter | 91 mm |
| Colour | Brown |
| Function | Shaft Seal, crankshaft |
| Type | Shaft Seal, crankshaft |
| Placement on Vehicle | transmission sided |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Function | Mount, exhaust system |
| Placement on Vehicle | Catalytic Converter, Soot Particulate Filter |
| Material | Rubber/Metal |
| Type | Mount, exhaust system |
| for OE number | 1J0 253 144 H |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Function | Filter Set, cabin air |
| Type | Filter Set, cabin air |
| Filter type | Activated Carbon Filter |
| Width | 186 mm |
| Height | 25 mm |
| Length | 187 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Type | Filter, cabin air |
| Function | Filter, cabin air |
| Filter type | Pollen Filter |
| Width | 130 mm |
| Height | 44 mm |
| Length | 380 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 95 mm |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Function | Screw Set, gears (timing chain) |
| Type | Screw Set, gears (timing chain) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bolt, camshaft gear (101125)
- 4x Febi Sliding Rail Bolts, timing chain (101126)
- 2x Febi Screw (101128)
- 1x Febi Quill, cylinder head (101129)
- 1x Febi Bolt, camshaft gear (46364)
£14.06
Important compatibility info
| Placement on Vehicle | Right |
| Length | 580 mm |
| Width | 8.34 mm |
| Material | NBR (nitrile butadiene rubber) |
| Thickness | 5 mm |
| Function | Gasket, cylinder head cover |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| External Thread Size | M18 x 1,5 |
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Function | Ball Joint |
| Cone Size | 22 mm |
| Type | Ball Joint |
| Additional Information 2 | with retaining ring |
| Steering arm type | for control arm |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.07
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023