Important compatibility info
Internal Thread Size | M14 x 1,5 |
External Thread Size | M14 x 1,5 |
Type | Inner Tie Rod |
Function | Inner Tie Rod |
Extra Description | ProKit |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 268 mm |
Additional Information | with counter nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Air Filter |
Type | Air Filter |
Filter type | Filter Insert |
Additional Information 2 | with pre-filter |
Width | 222 mm |
Length | 345 mm |
Height | 58 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Material | Sheet Steel |
Placement on Vehicle | Rear Axle Left, Lower, Rear Axle Right |
Steering arm type | Control Arm |
Additional Information | with rubber mounts |
Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 72 mm |
Material | Rubber/Metal |
Outer diameter | 63 mm |
Inner diameter | 20 mm |
Function | Mounting, stabiliser bar |
Placement on Vehicle | Rear Axle |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Joint Type | CV Joint |
Placement on Vehicle | Wheel Side, Front Axle Right |
Length | 123 mm |
Material | Thermoplast |
Type | Bellow Kit, drive shaft |
Function | Bellow Kit, drive shaft |
Inner diameter 1 | 38 mm |
Inner diameter 2 | 86 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (172861)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Colour | Black |
Extra Description | febi Plus |
Type | Door Handle, interior equipment |
Function | Door Handle, interior equipment |
Placement on Vehicle | Interior Door Panel, Front, Left |
Material | Plastic |
Paired article numbers | 178842 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Interior Door Panel, Front, Right |
Paired article numbers | 177969 |
Colour | Black |
Type | Door Handle, interior equipment |
Function | Door Handle, interior equipment |
Material | Plastic |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Right |
Additional Information | with nuts |
Length | 144 mm |
Diameter | 1 mm |
External Thread Size | M10 x 1,25 |
Spanner Size | 15 |
Material | Steel |
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
Thread Length | 27 mm |
Rod/Strut | Coupling Rod |
Paired article numbers | 180691 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 4 |
for OE number | 27150-AX115 |
Function | Resistor, interior blower |
Extra Description | febi Plus |
Type | Resistor, interior blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Spanner Size | 34 |
Additional Information | with counter nut |
Function | Inner Tie Rod |
External Thread Size | M16 x 1,5 |
Type | Inner Tie Rod |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 244 mm |
Outer diameter | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Hydraulic Filter Kit, automatic transmission |
Width | 175 mm |
Length | 188.8 mm |
Height | 20 mm |
Additional Information 2 | with oil sump gasket |
Filter type | Screen Filter |
Type | Hydraulic Filter Kit, automatic transmission |
Seal Material | NBR (nitrile butadiene rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Hydraulic Filter, automatic transmission (04872)
- 1x Febi Gasket, automatic transmission oil sump (08717)
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 38 mm |
Material | Rubber |
Outer diameter | 48 mm |
Inner diameter | 21 mm |
Function | Mounting Kit, stabiliser bar |
for OE number | 201 320 00 47 |
Type | Mounting Kit, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 4x Febi Mounting, stabiliser bar (08746)
- 8x Febi Nut (08565)
- 8x Febi Washer (08567)
Important compatibility info
Pipe Diameter | 9 mm |
Replaces | 41041 |
Length | 80 mm |
Paired article numbers | 30398 |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
External Thread Size | M10 x 1,25 |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 1450 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 8 |
Function | V-Ribbed Belt |
Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Bellow Kit, drive shaft |
Inner diameter 2 | 72 mm |
Inner diameter 1 | 22 mm |
Material | Thermoplast |
Length | 127 mm |
Placement on Vehicle | Front Axle, Wheel Side |
Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (27406)
- 1x Febi Molybdenum Grease (02582)
- 1x Febi Clamping Clip (38757)
- 1x Febi Clamping Clip (45641)
Important compatibility info
Height | 294 mm |
Outer diameter | 126 mm |
Filter type | Filter Insert |
Function | Air Filter |
Inner diameter | 65 mm |
Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 106 mm |
Width | 135 mm |
Filter type | Filter Insert |
Function | Air Filter |
Length | 254 mm |
Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Outer |
Inner diameter | 206 mm |
Mounting bores distance | 124 mm |
Mounting points diameter | 11 mm |
Function | Fixing Strap, compressed-air tank |
Type | Fixing Strap, compressed-air tank |
Material | Sheet Steel |
Colour | black |
Bolt Head/Nut Design | External Hexagon |
External Thread Size | M12 x 1,75 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left |
Length | 240 mm |
Paired article numbers | 170284 |
Thread Length | 11.3 mm |
Function | Brake Hose |
External Thread Size | M10 x 1 |
Internal Thread Size | M10 x 1 |
Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with clamps |
Placement on Vehicle | Upper |
Cooling Hose | from engine to engine cooler |
Function | Radiator Hose |
Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023