Important compatibility info
Pipe Diameter | 9 mm |
External Thread Size | M12 x 1,25 |
Additional Information | with nuts |
Placement on Vehicle | Front Axle Right |
Length | 79 mm |
Material | Steel |
Paired article numbers | 27989 |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 295 mm |
Material | Steel |
Outer diameter | 111 mm |
Inner diameter | 87.5 mm. 105 mm |
Function | Corrugated Pipe, exhaust system |
Type | Corrugated Pipe, exhaust system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Internal Thread Size | M14 x 1,5 |
External Thread Size | M14 x 1,5 |
Type | Inner Tie Rod |
Function | Inner Tie Rod |
Extra Description | ProKit |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 268 mm |
Additional Information | with counter nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Air Filter |
Type | Air Filter |
Filter type | Filter Insert |
Additional Information 2 | with pre-filter |
Width | 222 mm |
Length | 345 mm |
Height | 58 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Material | Sheet Steel |
Placement on Vehicle | Rear Axle Left, Lower, Rear Axle Right |
Steering arm type | Control Arm |
Additional Information | with rubber mounts |
Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 72 mm |
Material | Rubber/Metal |
Outer diameter | 63 mm |
Inner diameter | 20 mm |
Function | Mounting, stabiliser bar |
Placement on Vehicle | Rear Axle |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Joint Type | CV Joint |
Placement on Vehicle | Wheel Side, Front Axle Right |
Length | 123 mm |
Material | Thermoplast |
Type | Bellow Kit, drive shaft |
Function | Bellow Kit, drive shaft |
Inner diameter 1 | 38 mm |
Inner diameter 2 | 86 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (172861)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Colour | Black |
Extra Description | febi Plus |
Type | Door Handle, interior equipment |
Function | Door Handle, interior equipment |
Placement on Vehicle | Interior Door Panel, Front, Left |
Material | Plastic |
Paired article numbers | 178842 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Interior Door Panel, Front, Right |
Paired article numbers | 177969 |
Colour | Black |
Type | Door Handle, interior equipment |
Function | Door Handle, interior equipment |
Material | Plastic |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Right |
Additional Information | with nuts |
Length | 144 mm |
Diameter | 1 mm |
External Thread Size | M10 x 1,25 |
Spanner Size | 15 |
Material | Steel |
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
Thread Length | 27 mm |
Rod/Strut | Coupling Rod |
Paired article numbers | 180691 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 4 |
for OE number | 27150-AX115 |
Function | Resistor, interior blower |
Extra Description | febi Plus |
Type | Resistor, interior blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Spanner Size | 34 |
Additional Information | with counter nut |
Function | Inner Tie Rod |
External Thread Size | M16 x 1,5 |
Type | Inner Tie Rod |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 244 mm |
Outer diameter | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Hydraulic Filter Kit, automatic transmission |
Width | 175 mm |
Length | 188.8 mm |
Height | 20 mm |
Additional Information 2 | with oil sump gasket |
Filter type | Screen Filter |
Type | Hydraulic Filter Kit, automatic transmission |
Seal Material | NBR (nitrile butadiene rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Hydraulic Filter, automatic transmission (04872)
- 1x Febi Gasket, automatic transmission oil sump (08717)
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 38 mm |
Material | Rubber |
Outer diameter | 48 mm |
Inner diameter | 21 mm |
Function | Mounting Kit, stabiliser bar |
for OE number | 201 320 00 47 |
Type | Mounting Kit, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 4x Febi Mounting, stabiliser bar (08746)
- 8x Febi Nut (08565)
- 8x Febi Washer (08567)
Important compatibility info
Pipe Diameter | 9 mm |
Replaces | 41041 |
Length | 80 mm |
Paired article numbers | 30398 |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
External Thread Size | M10 x 1,25 |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 1450 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 8 |
Function | V-Ribbed Belt |
Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Bellow Kit, drive shaft |
Inner diameter 2 | 72 mm |
Inner diameter 1 | 22 mm |
Material | Thermoplast |
Length | 127 mm |
Placement on Vehicle | Front Axle, Wheel Side |
Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (27406)
- 1x Febi Molybdenum Grease (02582)
- 1x Febi Clamping Clip (38757)
- 1x Febi Clamping Clip (45641)
Important compatibility info
Height | 294 mm |
Outer diameter | 126 mm |
Filter type | Filter Insert |
Function | Air Filter |
Inner diameter | 65 mm |
Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 106 mm |
Width | 135 mm |
Filter type | Filter Insert |
Function | Air Filter |
Length | 254 mm |
Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Outer |
Inner diameter | 206 mm |
Mounting bores distance | 124 mm |
Mounting points diameter | 11 mm |
Function | Fixing Strap, compressed-air tank |
Type | Fixing Strap, compressed-air tank |
Material | Sheet Steel |
Colour | black |
Bolt Head/Nut Design | External Hexagon |
External Thread Size | M12 x 1,75 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left |
Length | 240 mm |
Paired article numbers | 170284 |
Thread Length | 11.3 mm |
Function | Brake Hose |
External Thread Size | M10 x 1 |
Internal Thread Size | M10 x 1 |
Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 46 mm |
Function | Sealing Cap, tank unit (Urea injection) |
Extra Description | febi Plus |
Type | Sealing Cap, tank unit (Urea injection) |
Material | Plastic |
Colour | Blue |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with clamps |
Placement on Vehicle | Upper |
Cooling Hose | from engine to engine cooler |
Function | Radiator Hose |
Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 903 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 6 |
Alternator type | for starter generator |
Type | V-Ribbed Belt |
Function | V-Ribbed Belt |
Tensile Cord Material | Aramid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Length | 120 mm |
Additional Information 2 | with crown nut |
Spanner Size | 22 |
Paired article numbers | 196688 |
Type | Tie Rod End |
Function | Tie Rod End |
External Thread Size | M10 x 1,25 |
Internal Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Length | 120 mm |
Additional Information 2 | with crown nut |
Spanner Size | 22 |
Paired article numbers | 196687 |
Cone Size | 13.5 mm |
Type | Tie Rod End |
Function | Tie Rod End |
Cone Size 2 | 15 mm |
External Thread Size | M10 x 1,25 |
Internal Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 107 mm |
Inner diameter | 93 mm |
Filter type | Spin-on Filter, Side Stream Filtration |
Function | Oil Filter |
Internal Thread Size | 1 3/8" - 16 |
Height | 264 mm |
Type | Oil Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Cast Iron |
Placement on Vehicle | Rear Axle Left |
Function | Wheel Brake Cylinder |
Piston Diameter | 19.1 mm |
Paired article numbers | 102821 |
Type | Wheel Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Ball Joint |
Additional Information 2 | with retaining ring |
Steering arm type | for control arm |
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Type | Ball Joint |
Cone Size | 16 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 245 mm |
Height | 51 mm |
Width | 195 mm |
Filter type | Filter Insert |
Type | Air Filter |
Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 23605 |
Placement on Vehicle | Front Axle Left |
Internal Thread Size | M14 x 1,5 |
Function | Tie Rod End |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 257 mm |
External Thread Size | M18 x 1,5, M14 x 1,5 |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Inner Tie Rod |
Extra Description | ProKit |
Type | Inner Tie Rod |
Additional Information | with counter nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Paired article numbers | 24023 |
Function | Tie Rod End |
External Thread Size | M12 x 1,25 |
Internal Thread Size | M14 x 1,5 |
Additional Information | with lock nut |
Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Paired article numbers | 24024 |
Function | Tie Rod End |
Additional Information | with lock nut |
Internal Thread Size | M14 x 1,5 |
External Thread Size | M12 x 1,25 |
Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Housing length | 277 mm |
Placement on Vehicle | both sides |
Length | 492 mm |
Eject Force | 440 N |
Stroke | 185 mm |
Housing Diameter | 18 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, boot/cargo area |
Type | Gas Spring, boot/cargo area |
Mounting points diameter | 16.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 132 mm |
Placement on Vehicle | Front Axle |
Function | Repair Kit, suspension strut support mount |
Extra Description | ProKit |
Inner diameter | 14 mm |
Type | Repair Kit, suspension strut support mount |
Additional Information 2 | with fastening material, with ball bearing |
Material | Rubber/Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Repair Kit, suspension strut support mount (07559)
- 1x Febi Screw (05140)
- 1x Febi Nut (05139)
- 1x Febi Nut (37722)
Important compatibility info
Additional Information | with nuts |
External Thread Size | M10 x 1,25 |
Placement on Vehicle | Front Axle Right |
Length | 70 mm |
Material | Steel |
Spanner Size | 17 |
Paired article numbers | 42100 |
Rod/Strut | Coupling Rod |
Colour | Black |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Ribs | 6 |
Function | V-Ribbed Belt |
Length | 1305 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 1076 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 7 |
Type | V-Ribbed Belt |
Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Lower, Front, Front Axle Left, Front Axle Right |
Outer diameter | 66 mm |
Thickness | 60 mm |
Inner diameter | 16 mm |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | ACM (Polyacrylate) |
Function | Gasket, cylinder head cover |
Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Link/Coupling Rod, stabiliser bar |
Length | 280 mm |
External Thread Size | M12 x 1,25 |
Material | Plastic |
Thickness | 66 mm |
Rod/Strut | Coupling Rod |
Thread Length | 29.5 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with seal ring |
Height | 163 mm |
Outer diameter | 67 mm |
Inner diameter | 27 mm |
Filter type | Filter Insert |
Seal Diameter | 95 mm |
Type | Fuel filter |
Function | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with lock nut |
Type | Tie Rod End |
Function | Tie Rod End |
Internal Thread Size | M16 x 1,5 |
Placement on Vehicle | Front Axle Right |
Length | 91 mm |
Paired article numbers | 184022 |
External Thread Size | M12 x 1,5 |
Spanner Size | 23 |
Additional Information
Technical Information
After replacement, the optical driver assistance systems (cameras, radar, etc.) may need to be recalibrated. Please observe the manufacturer's instructions.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Tie Rod End |
Spanner Size | 23 |
Type | Tie Rod End |
Internal Thread Size | M16 x 1,5 |
External Thread Size | M16 x 1,5 |
Placement on Vehicle | Front Axle Left |
Length | 94 mm |
Paired article numbers | 184020 |
Additional Information | with nuts |
Additional Information
Technical Information
After replacement, the optical driver assistance systems (cameras, radar, etc.) may need to be recalibrated. Please observe the manufacturer's instructions.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Air Filter |
Type | Air Filter |
Filter type | Filter Insert |
Width | 233 mm |
Height | 56 mm |
Length | 236 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Plastic |
Function | Valve, crankcase ventilation |
Extra Description | febi Plus |
Type | Valve, crankcase ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 14106 |
Function | Tie Rod End |
Internal Thread Size | M14 x 1,5 |
Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Function | Ball Joint |
Type | Ball Joint |
Steering arm type | for control arm |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | frontal sided |
Outer diameter | 66 mm |
Thickness | 6 mm |
Inner diameter | 42 mm |
Function | Shaft Seal, crankshaft |
Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023