Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | FPM (fluoride rubber) |
| Outer diameter | 175 mm. 205 mm |
| Thickness | 16.3 mm |
| Inner diameter | 139 mm |
| Number of Teeth | 100 |
| Type | Shaft Seal, wheel hub |
| Function | Shaft Seal, wheel hub |
| Additional Information 2 | with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Wings | 8 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Housing material | Aluminium |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 37 mm |
| Number of Connectors / Ports | 7 |
| DIN / ISO | 3731 |
| Voltage | 24 V |
| Inner diameter | 19 mm |
| Number of Coils | 46 |
| Working length | 4.5 m |
| Function | Coiled Cable |
| Material | PU (Polyurethane) |
| Type | Coiled Cable |
| Additional Information 2 | with plug |
| Connecting plug material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thickness | 32.97 mm |
| Inner diameter | 46 mm |
| Function | Coolant Pipe |
| Outer diameter | 55 mm |
| Type | Coolant Pipe |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Filter, cabin air |
| Type | Filter, cabin air |
| Height | 30 mm |
| Length | 291 mm |
| Width | 192 mm |
| Filter type | Activated Carbon Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 163 mm |
| Height | 351 mm |
| Inner diameter | 92 mm |
| Filter type | Filter Insert |
| Function | Air Filter |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 78 mm |
| Filter type | Spin-on Filter |
| Internal Thread Size | M16 x 1,5 |
| Replaces | 108792 |
| Height | 60 mm |
| Type | Air Filter, compressor intake |
| Function | Air Filter, compressor intake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Internal Thread Size | M22 x 1,5 |
| Height | 70 mm |
| Outer diameter | 94 mm |
| Filter type | Spin-on Filter |
| Seal Diameter | 72.5 mm |
| Type | Oil Filter |
| Function | Oil Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 195 mm |
| Filter type | Spin-on Filter, with water separator |
| Outer diameter | 94 mm |
| Function | Fuel filter |
| Internal Thread Size | M16 x 1,5 |
| Type | Fuel filter |
| Gasket outer diameter | 71.6 mm |
| Gasket inner diameter | 62.4 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Fuel filter |
| Filter type | Spin-on Filter, with water separator |
| Outer diameter | 94 mm |
| Length | 195 mm |
| Internal Thread Size | M14 x 1,5 |
| Type | Fuel filter |
| Replaces | 108790 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Air Filter |
| Type | Air Filter |
| Filter type | Filter Insert |
| Inner diameter | 217 mm |
| Outer diameter | 327 mm |
| Length | 515 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 70 mm |
| Width | 110 mm |
| Thickness | 36.5 mm |
| Voltage | 28 V |
| Number of Connectors / Ports | 5 |
| Function | Alternator Regulator |
| Type | Alternator Regulator |
| Hole Spacing | 79 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 642 mm |
| Outer diameter | 60 mm |
| Stroke | 457 mm |
| Mounting points diameter | 35 mm. 24 mm |
| Function | Tilt Cylinder, driver cab |
| Pressure side external thread size | M12 x 1,5 |
| Suction side external thread size | M12 x 1,5 |
| Type | Tilt Cylinder, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 643 mm |
| Outer diameter | 50 mm |
| Number of Connectors / Ports | 2 |
| Stroke | 464 mm |
| Mounting points diameter | 25 mm |
| Function | Tilt Cylinder, driver cab |
| Pressure side external thread size | M12 x 1,5 |
| Suction side external thread size | M12 x 1,5 |
| Type | Tilt Cylinder, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 696 mm |
| Outer diameter | 55 mm |
| Number of Connectors / Ports | 2 |
| Stroke | 357 mm |
| Mounting points diameter | 25 mm. 26 mm |
| Function | Tilt Cylinder, driver cab |
| Pressure side external thread size | M14 x 1,5 |
| Suction side external thread size | M12 x 1,5 |
| Type | Tilt Cylinder, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tilt Cylinder, driver cab (44936)
- 1x Febi Cover, driver cab tilt cylinder (40798)
- 1x Febi Cable Tie (07026)
Important compatibility info
| Length | 701 mm. 1031 mm |
| Outer diameter | 60 mm |
| Number of Connectors / Ports | 2 |
| Stroke | 330 mm |
| Mounting points diameter | 48 mm. 22 mm |
| Function | Tilt Cylinder, driver cab |
| Pressure side external thread size | M14 x 1,5 |
| Suction side external thread size | M12 x 1,5 |
| Type | Tilt Cylinder, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Cover, driver cab tilt cylinder (40798)
- 1x Febi Cable Tie (07026)
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Front Axle Left, Front Axle Right, Rear Axle Right |
| Material | FPM (fluoride rubber) |
| Outer diameter | 165 mm |
| Thickness | 13.5 mm |
| Inner diameter | 137 mm |
| Function | Shaft Seal, wheel bearing |
| Type | Shaft Seal, wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | PP (Polypropylene) |
| Colour | Black |
| Function | Cap, gear lever knob |
| Type | Cap, gear lever knob |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | both sides |
| Outer diameter | 80 mm. 111 mm |
| Thickness | 68 mm |
| Inner diameter | 58 mm |
| Function | Mounting, control/trailing arm |
| Replaces | 07704 |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 25 mm. 32 mm |
| Function | Lock Cylinder, ignition lock |
| Type | Lock Cylinder, ignition lock |
| Lock System | with two keys |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















