Proud to be a UK-based company
Contact us
Important compatibility info
| Height | 35 mm |
| Width | 151 mm |
| Filter type | Activated Carbon Filter |
| Function | Filter, cabin air |
| Length | 260 mm |
| Weight | 0.198 kg |
| Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.59
Important compatibility info
| Outer diameter | 50 mm |
| Function | Thermostat, coolant |
| Opening Temperature | 83 °C |
| Additional Information | with gasket/seal |
| Weight | 0.18 kg |
| Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.59
Important compatibility info
| Number of Connectors / Ports | 1 |
| Shifting Points | 0.2 bar |
| Function | Oil Pressure Switch |
| Weight | 0.043 kg |
| Type | Oil Pressure Switch |
| Housing Colour | Black |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.59
Important compatibility info
| Weight | 0.42 kg |
| Placement on Vehicle | Lower, Front, Front Axle Left, Front Axle Right |
| Outer diameter | 66 mm |
| Thickness | 60 mm |
| Inner diameter | 16 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.59
Important compatibility info
| Weight | 0.203 kg |
| Height | 163 mm |
| Outer diameter | 95 mm |
| Inner diameter | 55 mm |
| Filter type | Filter Insert |
| Function | Fuel filter |
| Type | Fuel filter |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.59
Important compatibility info
| Placement on Vehicle | Right |
| Length | 264 mm |
| Height | 42 mm |
| Width | 217 mm |
| Additional Information 2 | with pre-filter |
| Filter type | Filter Insert |
| Paired article numbers | 194306 |
| Weight | 0.206 kg |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.59
Important compatibility info
| Placement on Vehicle | Left |
| Length | 264 mm |
| Height | 42 mm |
| Width | 217 mm |
| Additional Information 2 | with pre-filter |
| Filter type | Filter Insert |
| Paired article numbers | 194305 |
| Weight | 0.206 kg |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.59
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Material | Rubber/Metal |
| Additional Information 2 | without ball bearing |
| Weight | 0.810 kg |
| Type | Suspension Strut Support Mount |
| Function | Suspension Strut Support Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.60
Important compatibility info
| Function | Splash Guard, brake disc |
| Extra Description | febi Plus |
| Type | Splash Guard, brake disc |
| Weight | 0.145 kg |
| Paired article numbers | 176753 |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.60
Important compatibility info
| Weight | 0.550 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 244 mm |
| External Thread Size | M14 x 1,5, M16 x 1,5 |
| Spanner Size | 36 |
| Outer diameter | 41 mm |
| Function | Inner Tie Rod |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
| Additional Information | with counter nut |
| for OE number | 230 338 00 15 SK |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.60
Important compatibility info
| Additional Information 2 | with seal ring |
| Number of Connectors / Ports | 3 |
| Type | Sensor, coolant level |
| Function | Sensor, coolant level |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.61
Important compatibility info
| Weight | 0.03 kg |
| Material | NBR (nitrile butadiene rubber) |
| Function | Gasket, intake manifold |
| Type | Gasket, intake manifold |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.61
Important compatibility info
| Function | Dust Cover Kit, shock absorber |
| Placement on Vehicle | Front Axle |
| Weight | 0.2 kg |
| Type | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Protective Cap/Bellow, shock absorber (34288)
- 2x Febi Rubber Buffer, suspension (33117)
£14.61
Important compatibility info
| Function | Resistor, interior blower |
| Extra Description | febi Plus |
| Type | Resistor, interior blower |
| for OE number | 6441.CT |
| Weight | 0.047 kg |
| Number of Connectors / Ports | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.61
Important compatibility info
| Function | Holder, Wheel Chock |
| Type | Holder, Wheel Chock |
| Material | PP (Polypropylene) |
| Width | 284 mm |
| Mounting points diameter | 12.5 mm |
| Depth | 183 mm |
| Weight | 0.469 kg |
| Height | 302 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.61
Important compatibility info
| Function | Thermostat, coolant |
| Weight | 0.056 kg |
| Outer diameter | 34 mm |
| Opening Temperature | 87 °C |
| Type | Thermostat, coolant |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.61
Important compatibility info
| Outer diameter | 38 mm |
| Additional Information | with counter nut |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Weight | 0.462 kg |
| Function | Inner Tie Rod |
| Type | Inner Tie Rod |
| External Thread Size | M14 x 1,5 |
| Spanner Size | 34 |
| Length | 220 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.61
Important compatibility info
| Weight | 0.63 kg |
| External Thread Size | M10 x 1,25 |
| Function | Tie Rod End |
| Paired article numbers | 107931 |
| Spanner Size | 19 |
| Length | 210 mm |
| Placement on Vehicle | Front Axle Left |
| Internal Thread Size | M14 x 1,5 |
| Type | Tie Rod End |
| Additional Information | with counter nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.61
Important compatibility info
| Length | 118 mm |
| Material | Thermoplast |
| Inner diameter 2 | 87 mm |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
| Weight | 0.210 kg |
| Placement on Vehicle | Front Axle Left, Wheel Side, Front Axle Right |
| Inner diameter 1 | 27 mm |
| Joint Type | CV Joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Clamping Clip (29200)
- 1x Febi Clamping Clip (45644)
- 1x Febi High Temperature Lubricant (03630)
£14.61
Important compatibility info
| Weight | 0.47 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 100 mm |
| Outer diameter | 69 mm. 81.5 mm |
| Function | Bushing, axle beam |
| Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.61
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 102 mm |
| Thickness | 79 mm |
| for OE number | 45046-09251 |
| External Thread Size | M12 x 1,25 |
| Internal Thread Size | M15 x 1,5 |
| Function | Tie Rod End |
| Spanner Size | 19 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Weight | 0.36 kg |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.61
Important compatibility info
| Placement on Vehicle | Left Rear, Right Rear |
| Length | 2030 mm |
| Weight | 0.360 kg |
| Type | Cable Pull, parking brake |
| Function | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.62
Important compatibility info
| Outer diameter | 10 mm |
| Spanner Size | 18 |
| Rod/Strut | Coupling Rod |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 117 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Weight | 0.001 kg |
| Material | Steel |
| External Thread Size | M12 x 1,5 |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.62
Important compatibility info
| Weight | 0.13 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, Front |
| Length | 54 mm |
| Material | Aluminium |
| Outer diameter | 54 mm |
| Inner diameter | 12 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Bushing, axle beam |
| Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.62
Important compatibility info
| Weight | 0.17 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Steel |
| Spanner Size | 13 |
| Rod/Strut | Coupling Rod |
| Colour | Black |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M8 x 1,25 |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information 2 | with nut, with washers |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.62
Important compatibility info
| Function | Link/Coupling Rod, stabiliser bar |
| Material | Steel |
| Rod/Strut | Coupling Rod |
| Weight | 0.18 kg |
| Length | 86 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Inner diameter 1 | 10 mm |
| Inner diameter 2 | 9 mm |
| Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.62
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 70 mm |
| Diameter | 1 mm |
| Additional Information | with nuts |
| Material | Plastic |
| Thickness | 59.6 mm |
| Additional Information 2 | with screw |
| Rod/Strut | Coupling Rod |
| Thread Length | 20 mm |
| Weight | 0.189 kg |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M10 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Link/Coupling Rod, stabiliser bar (102444)
- 1x Febi Nut, stabiliser bar (193499)
- 1x Febi Screw (193498)
£14.62
Important compatibility info
| Weight | 0.425 kg |
| Function | Link/Coupling Rod, stabiliser bar |
| Thread Length | 28 mm |
| Rod/Strut | Coupling Rod |
| Paired article numbers | 106367 |
| Spanner Size | 18 |
| Thickness | 63 mm |
| Material | Steel |
| Placement on Vehicle | Front Axle Left |
| Length | 285 mm |
| External Thread Size | M12 x 1,5 |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.63
Important compatibility info
| Function | Link/Coupling Rod, stabiliser bar |
| Thread Length | 28 mm |
| Rod/Strut | Coupling Rod |
| Paired article numbers | 106366 |
| Spanner Size | 18 |
| Thickness | 63 mm |
| Material | Steel |
| Length | 285 mm |
| Placement on Vehicle | Front Axle Right |
| Weight | 0.425 kg |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M12 x 1,5 |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.63
Important compatibility info
| Weight | 0.710 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Tie Rod End |
| Type | Tie Rod End |
| External Thread Size | M14 x 1,5 |
| Internal Thread Size | M16 x 1,5 |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.63
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023