Important compatibility info
Length | 265 mm |
Height | 30 mm |
Width | 195 mm |
Filter type | Activated Carbon Filter |
Type | Filter, cabin air |
Function | Filter, cabin air |
Weight | 0.26 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.155 kg |
Material | Plastic |
Outer diameter | 65 mm |
Function | Deflection/Guide Pulley, v-ribbed belt |
Width of castor bearing surface | 26 mm |
Type | Deflection/Guide Pulley, v-ribbed belt |
for OE number | 651 200 02 70 |
Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Cone Size | 21.8 mm |
Mounting points diameter | 10.3 mm |
Additional Information | with fastening/mounting material |
Weight | 1.740 kg |
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
External Thread Size | M20 x 1,5 |
Function | Ball Joint |
Type | Ball Joint |
Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Sensor Ring, ABS |
Outer diameter | 212 mm |
Thickness | 18 mm |
Inner diameter | 169 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Weight | 0.250 kg |
Number of Teeth, ABS ring | 100 |
Type | Sensor Ring, ABS |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.35 kg |
Hose Length | 520 mm |
Placement on Vehicle | Upper |
Outer diameter | 44 mm |
Inner diameter | 36 mm |
Function | Radiator Hose |
Cooling Hose | from thermostat to radiator |
Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left Rear, Right Rear |
Length | 1390 mm |
Type | Cable Pull, parking brake |
Function | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.450 kg |
Placement on Vehicle | Right Rear, Left Rear |
Length | 1560 mm |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Teeth, ABS ring | 100 |
Function | Sensor Ring, ABS |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Inner diameter | 168 mm |
Thickness | 12.5 mm |
Outer diameter | 202 mm |
Material | Steel |
Type | Sensor Ring, ABS |
Weight | 0.185 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with counter nut |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 196 mm |
Function | Inner Tie Rod |
Weight | 0.420 kg |
External Thread Size | M14 x 1,5 |
Extra Description | ProKit |
Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Lower, Front Axle Left, Front Axle Right |
Material | Rubber/Metal |
Outer diameter | 53 mm |
Thickness | 68 mm |
Inner diameter | 14 mm |
Function | Mounting, control/trailing arm |
Weight | 0.43 kg |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.312 kg |
Internal Thread Size | M16 x 1,5 |
External Thread Size | M16 x 1,5 |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 100 mm |
Thread Type | with right-hand thread |
Function | Tie Rod End |
Type | Tie Rod End |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.231 kg |
Placement on Vehicle | Front Axle, transmission sided |
Length | 80 mm |
Material | Rubber |
Inner diameter 1 | 20 mm |
Inner diameter 2 | 68 mm |
Function | Bellow Kit, drive shaft |
Type | Bellow Kit, drive shaft |
Joint Type | Tripod Joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (101949)
- 1x Febi Clamping Clip (38757)
- 1x Febi Clamping Clip (45636)
- 1x Febi High Temperature Lubricant (03630)
Important compatibility info
Placement on Vehicle | Rear Axle |
Material | PU (Polyurethane), Plastic |
Function | Dust Cover Kit, shock absorber |
Weight | 0.4 kg |
Type | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Diameter 1 | 37 mm |
Diameter 2 | 15 mm |
Function | Gasket, water pump |
Weight | 0.037 kg |
Type | Gasket, water pump |
Replaces | 09987 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.250 kg |
Placement on Vehicle | both sides |
Length | 493 mm |
Housing Diameter | 19 mm |
Eject Force | 600 N |
Stroke | 181 mm |
Mounting points diameter | 18 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, boot/cargo area |
Housing length | 278.5 mm |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thread Type | with right-hand thread |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Tie Rod End |
External Thread Size | M14 x 1,5 |
Weight | 0.281 kg |
Replaces | 14139 |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 130 mm |
Outer diameter | 88 mm |
Function | Fuel Filter |
Housing material | Plastic |
Type | Fuel Filter |
Weight | 0.23 kg |
Filter type | In-Line Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Inner Tie Rod |
Length | 183 mm |
Additional Information | with counter nut |
Weight | 0.38 kg |
Function | Inner Tie Rod |
Extra Description | ProKit |
External Thread Size | M14 x 1,5, M18 x 1,5 |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Pipe Diameter | 10 mm |
Weight | 0.3 kg |
Placement on Vehicle | Rear Axle Left |
Length | 65 mm |
Material | Steel |
Paired article numbers | 34717 |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
External Thread Size | M12 x 1,25 |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 15 mm |
Inner diameter | 31 mm |
Bearing Type | Thrust Bearing |
Type | Bush, steering knuckle |
Function | Bush, steering knuckle |
Outer diameter | 48 mm |
Weight | 0.071 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023