Proud to be a UK-based company
Contact us
Important compatibility info
| Material | NBR (nitrile butadiene rubber) |
| Function | Gasket, intake manifold |
| Type | Gasket, intake manifold |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.61
Important compatibility info
| Length | 118 mm |
| Material | Thermoplast |
| Inner diameter 2 | 87 mm |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
| Placement on Vehicle | Front Axle Left, Wheel Side, Front Axle Right |
| Inner diameter 1 | 27 mm |
| Joint Type | CV Joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Clamping Clip (29200)
- 1x Febi Clamping Clip (45644)
- 1x Febi High Temperature Lubricant (03630)
£14.61
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Material | Aluminium |
| Function | Wheel Brake Cylinder |
| Paired article numbers | 103029 |
| Piston Diameter | 19.1 mm |
| Type | Wheel Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.61
Important compatibility info
| Function | Thermostat, coolant |
| Outer diameter | 34 mm |
| Opening Temperature | 87 °C |
| Type | Thermostat, coolant |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.61
Important compatibility info
| Function | Dust Cover Kit, shock absorber |
| Placement on Vehicle | Front Axle |
| Type | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Protective Cap/Bellow, shock absorber (34288)
- 2x Febi Rubber Buffer, suspension (33117)
£14.61
Important compatibility info
| Outer diameter | 93 mm |
| Type | Coolant Filter |
| Function | Coolant Filter |
| Height | 104 mm |
| Gasket outer diameter | 71.05 mm |
| Internal Thread Size | M16 x 1,5 |
| Gasket inner diameter | 62.75 mm |
| Filter type | Spin-on Filter |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.61
Important compatibility info
| Additional Information 2 | with seal ring |
| Number of Connectors / Ports | 3 |
| Type | Sensor, coolant level |
| Function | Sensor, coolant level |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.61
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 197161 |
| Type | Splash Guard, brake disc |
| Function | Splash Guard, brake disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.61
Important compatibility info
| Type | Gasket, cylinder head cover |
| Function | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.62
Important compatibility info
| Additional Information 2 | with heat shield |
| Function | Gasket, exhaust manifold |
| Type | Gasket, exhaust manifold |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.62
Important compatibility info
| Width | 15 mm |
| Number of Teeth | 129 |
| Belts | with rounded tooth profile |
| Function | Timing Belt |
| Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.62
Important compatibility info
| Length | 1528 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 6 |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.62
Important compatibility info
| Function | Link/Coupling Rod, stabiliser bar |
| Material | Steel |
| Rod/Strut | Coupling Rod |
| Length | 86 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Inner diameter 1 | 10 mm |
| Inner diameter 2 | 9 mm |
| Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.62
Important compatibility info
| Length | 258 mm |
| Height | 55 mm |
| Width | 184 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.62
Important compatibility info
| Placement on Vehicle | Left Rear, Right Rear |
| Length | 2030 mm |
| Type | Cable Pull, parking brake |
| Function | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.62
Important compatibility info
| Placement on Vehicle | Front Axle |
| Number of Connectors / Ports | 2 |
| Brake Type | Disc Brake |
| Cable Length | 1100 mm |
| Type | Warning Contact, brake pad wear |
| Function | Warning Contact, brake pad wear |
| for OE number | T4A 13370 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.62
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Tie Rod End |
| Type | Tie Rod End |
| External Thread Size | M14 x 1,5 |
| Internal Thread Size | M16 x 1,5 |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.63
Important compatibility info
| External Thread Size | M12 x 1,25, M16 x 1,5 |
| Placement on Vehicle | Front Axle Left, inner, Front Axle Right |
| Length | 174 mm |
| Material | Steel |
| Paired article numbers | 15272 |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information | with crown nut and split pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.63
Important compatibility info
| Length | 193 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Inner Tie Rod |
| External Thread Size | M16 x 1,5 |
| Internal Thread Size | M16 x 1,5 |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
| Additional Information | with counter nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.63
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 169.5 mm |
| Additional Information | with counter nut |
| Function | Inner Tie Rod |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
| External Thread Size | M16 x 1,5 |
| Internal Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.63
Important compatibility info
| Function | Tie Rod End |
| Internal Thread Size | M12 x 1,25 |
| Paired article numbers | 41369 |
| Thickness | 71 mm |
| Spanner Size | 17 |
| Placement on Vehicle | Front Axle Right |
| Length | 110 mm |
| External Thread Size | M10 x 1,25 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.63
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Front, Front Axle Right |
| Outer diameter | 40 mm |
| Thickness | 77 mm |
| Inner diameter | 16 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.63
Important compatibility info
| Function | Link/Coupling Rod, stabiliser bar |
| Thread Length | 28 mm |
| Rod/Strut | Coupling Rod |
| Paired article numbers | 106367 |
| Spanner Size | 18 |
| Thickness | 63 mm |
| Material | Steel |
| Placement on Vehicle | Front Axle Left |
| Length | 285 mm |
| External Thread Size | M12 x 1,5 |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.63
Important compatibility info
| Function | Link/Coupling Rod, stabiliser bar |
| Thread Length | 28 mm |
| Rod/Strut | Coupling Rod |
| Paired article numbers | 106366 |
| Spanner Size | 18 |
| Thickness | 63 mm |
| Material | Steel |
| Length | 285 mm |
| Placement on Vehicle | Front Axle Right |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M12 x 1,5 |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.63
Important compatibility info
| Outer diameter | 48 mm |
| Thickness | 45 mm |
| Type | Bush, connecting rod |
| Function | Bush, connecting rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.63
Important compatibility info
| External Thread Size | M12 x 1,75 |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 348 mm |
| Material | Steel |
| Rod/Strut | Coupling Rod |
| Pipe Diameter | 14 mm |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.63
Important compatibility info
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
| Inner diameter 2 | 75 mm |
| Inner diameter 1 | 28 mm |
| Material | Thermoplast |
| Length | 119 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (173576)
- 1x Febi Molybdenum Grease (02582)
£14.63
Important compatibility info
| Length | 207 mm |
| Height | 30 mm |
| Width | 189 mm |
| Filter type | Pollen Filter |
| Type | Filter, cabin air |
| Function | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.63
Important compatibility info
| Additional Information | with counter nut |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 280 mm |
| Function | Inner Tie Rod |
| External Thread Size | M14 x 1,5, M16 x 1,5 |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
| for OE number | 204 338 04 15 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.64
Important compatibility info
| Placement on Vehicle | Front Axle, Wheel Side |
| Material | Thermoplast |
| Function | Bellow Kit, drive shaft |
| Inner diameter 2 | 81 mm |
| Length | 138 mm |
| Type | Bellow Kit, drive shaft |
| Inner diameter 1 | 24 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (10354)
- 1x Febi Clamping Clip (38757)
- 1x Febi Clamping Clip (45643)
- 2x Febi Molybdenum Grease (02582)
£14.64
Important compatibility info
| Length | 121.5 mm |
| Outer diameter | 65 mm |
| Function | Bush, spring eye |
| Placement on Vehicle | Rear Axle |
| Inner diameter | 30 mm |
| Type | Bush, spring eye |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.64
Important compatibility info
| Width | 33 mm |
| Outer diameter | 66 mm |
| Inner diameter | 35 mm |
| Bearing Type | Angular Ball Bearing |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Additional Information 2 | with integrated magnetic sensor ring, with ABS sensor ring |
| Type | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.64
Important compatibility info
| Function | Hose, crankcase ventilation |
| Type | Hose, crankcase ventilation |
| for OE number | 116 094 07 91 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.64
Important compatibility info
| Length | 151 mm |
| Outer diameter | 93 mm |
| Inner diameter | 10 mm |
| Filter type | Filter Insert, without water separator |
| Type | Fuel filter |
| Function | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.64
Important compatibility info
| Function | Mount, exhaust system |
| Type | Mount, exhaust system |
| Material | Rubber/Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.64
Important compatibility info
| Length | 181 mm |
| Additional Information 2 | with crown nut |
| Placement on Vehicle | Front Axle Left |
| Spanner Size | 19 |
| Paired article numbers | 180271 |
| Type | Tie Rod End |
| Function | Tie Rod End |
| External Thread Size | M12 x 1,25 |
| Internal Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.64
Important compatibility info
| Additional Information 2 | with pre-filter |
| Width | 155 mm |
| Height | 44 mm |
| Length | 267 mm |
| Type | Air Filter |
| Function | Air Filter |
| Filter type | Filter Insert |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.64
Important compatibility info
| Additional Information 2 | with spacer disc |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 375 mm |
| Function | Inner Tie Rod |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.65
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 14122 |
| Thread Type | with left-hand thread |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Bolt / Nut Version | with plain washer |
| Additional Information | with crown nut and split pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.65
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 14123 |
| Thread Type | with right-hand thread |
| Length | 89 mm |
| Function | Tie Rod End |
| Extra Description | ProKit |
| External Thread Size | M12 x 1,25 |
| Type | Tie Rod End |
| Additional Information | with crown nut and split pin |
| Bolt / Nut Version | with plain washer |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.65
Important compatibility info
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 9 |
| Function | V-Ribbed Belt |
| Length | 1380 mm |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.65
Important compatibility info
| Function | Hydraulic Hose, steering |
| Placement on Vehicle | from fluid reservoir to hydraulic pump |
| Length | 352 mm |
| Type | Hydraulic Hose, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.65
Important compatibility info
| Function | Spacer, driver cab stabiliser |
| Thickness | 30 mm |
| Outer diameter | 74 mm |
| Type | Spacer, driver cab stabiliser |
| Inner diameter | 31 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.65
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Width | 60 mm |
| Material | PU (Polyurethane) |
| Function | Dust Cover Kit, shock absorber |
| Length | 163 mm |
| Type | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Protective Cap/Bellow, shock absorber (38657)
- 2x Febi Rubber Buffer, suspension (23430)
£14.65
Important compatibility info
| Number of Connectors / Ports | 3 |
| Pump Type | Dual Pump |
| Function | Washer Fluid Pump, window cleaning |
| Voltage | 24 V |
| Type | Washer Fluid Pump, window cleaning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.65
Important compatibility info
| for OE number | 1H0 121 407 A |
| Material | Plastic |
| Function | Expansion Tank, coolant |
| Type | Expansion Tank, coolant |
| Additional Information 2 | without lid |
| Number of Connectors / Ports | 2 |
| Additional Information | with coolant level sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.66
Important compatibility info
| Paired article numbers | 21922 |
| Rod/Strut | Coupling Rod |
| Placement on Vehicle | Front Axle Left |
| Internal Thread Size | M10 x 1,5 |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
| Length | 125 mm |
| Height | 32 mm |
| Material | Aluminium |
| Thickness | 38 mm |
| Spanner Size | 13 |
| Hole Spacing | 90 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.66
Important compatibility info
| Internal Thread Size | M10 x 1,5 |
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 21920 |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Spanner Size | 13 |
| Thickness | 38 mm |
| Material | Aluminium |
| Height | 32 mm |
| Length | 125 mm |
| Type | Link/Coupling Rod, stabiliser bar |
| Hole Spacing | 90 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.66
Important compatibility info
| Filter type | Pollen Filter |
| Function | Filter Set, cabin air |
| Type | Filter Set, cabin air |
| Length | 217 mm |
| Height | 21.5 mm |
| Width | 120 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.66
Important compatibility info
| Length | 1420 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Function | V-Ribbed Belt |
| Number of Ribs | 8 |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.66
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023