Important compatibility info
Placement on Vehicle | Left |
Function | Guide, timing chain |
Type | Guide, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rod/Strut | Guide Rod |
Additional Information | with rubber-metal mounts |
Placement on Vehicle | Rear Axle Left, Rear Axle Right, Rear Axle Lower |
Function | Rod/Strut, wheel suspension |
Type | Rod/Strut, wheel suspension |
Hole Spacing | 196 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 121.5 mm |
Outer diameter | 65 mm |
Function | Bush, spring eye |
Placement on Vehicle | Rear Axle |
Inner diameter | 30 mm |
Type | Bush, spring eye |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Mounting points diameter | 13.4 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right, Lower |
Cone Size | 18 mm |
Function | Ball Joint |
Additional Information | with fastening/mounting material |
Type | Ball Joint |
Steering arm type | for control arm |
for OE number | 54530-3S000 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 25 mm. 20 mm |
Function | Roller Guide, sliding door |
Placement on Vehicle | Centre, Right |
Extra Description | febi Plus |
Type | Roller Guide, sliding door |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M10 x 1 |
Placement on Vehicle | Rear Axle Right, outer |
Length | 197 mm |
Spanner Size | 11 |
Paired article numbers | 170288 |
Thread Length | 11.5 mm |
Type | Brake Hose |
Function | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Joint Type | Tripod Joint |
Placement on Vehicle | transmission sided, Front Axle |
Length | 95 mm |
Material | Rubber |
Type | Bellow Kit, drive shaft |
Function | Bellow Kit, drive shaft |
Inner diameter 1 | 26 mm |
Inner diameter 2 | 77 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (172866)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Placement on Vehicle | Front Axle Right |
Function | Tie Rod End |
Internal Thread Size | M14 x 1,5 |
External Thread Size | M12 x 1,25 |
Length | 181 mm |
Additional Information 2 | with nut |
Type | Tie Rod End |
Spanner Size | 19 |
Paired article numbers | 180278 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 181 mm |
Additional Information 2 | with crown nut |
Placement on Vehicle | Front Axle Left |
Spanner Size | 19 |
Paired article numbers | 180271 |
Type | Tie Rod End |
Function | Tie Rod End |
External Thread Size | M12 x 1,25 |
Internal Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 320 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Inner Tie Rod |
Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 36735 |
Placement on Vehicle | Front Axle Right, Lower |
Function | Ball Joint |
Cone Size | 19 mm |
Extra Description | ProKit |
Type | Ball Joint |
Steering arm type | for control arm |
Additional Information | with nuts |
Replaces | 26083 |
Thickness | 1 mm |
Replaced by | 26083 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ball Joint (26083)
- 3x Febi Nut, Supporting / Ball Joint (36734)
Important compatibility info
Placement on Vehicle | Front Axle Right |
Width | 69 mm |
Thickness | 100 mm |
Paired article numbers | 36301 |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Length | 307 mm |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 14.5 V |
Function | Alternator Regulator |
Type | Alternator Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Filter type | Activated Carbon Filter |
Type | Filter Set, cabin air |
Function | Filter Set, cabin air |
Length | 261 mm |
Height | 30 mm |
Width | 184 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Inner Tie Rod |
External Thread Size | M16 x 1,5 |
Additional Information | with counter nut |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 226 mm |
Internal Thread Size | M16 x 1,5 |
Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 638 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Brake Hose |
Type | Brake Hose |
Internal Thread Size | M10 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 45 mm |
Width | 203 mm |
Filter type | Activated Carbon Filter |
Type | Filter, cabin air |
Function | Filter, cabin air |
Length | 298 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Plastic |
Type | Expansion Tank, coolant |
Function | Expansion Tank, coolant |
for OE number | 77 01 470 460 SK |
Additional Information 2 | without lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Internal Thread Size | M70 x 1,5 |
Height | 25 mm |
Spanner Size | 95 |
Thread Type | with right-hand thread |
Type | Nut, kingpin |
Function | Nut, kingpin |
Material | Steel |
Surface | Phosphatized |
Outer diameter | 100 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Ribs | 6 |
Function | V-Ribbed Belt |
Chemical Properties | Elastic |
Type | V-Ribbed Belt |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Length | 730 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Accessory Kit, brake shoes |
Type | Accessory Kit, brake shoes |
Placement on Vehicle | Rear Axle, Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | engine sided |
Length | 1038 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 4 |
Type | V-Ribbed Belt |
Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 1300 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 4 |
Type | V-Ribbed Belt |
Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Cone Size | 18 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Ball Joint |
Mounting points diameter | 10.5 mm |
Type | Ball Joint |
Steering arm type | for control arm |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 107 mm |
Material | Thermoplast |
Inner diameter 1 | 27 mm |
Inner diameter 2 | 71 mm |
Function | Bellow Kit, drive shaft |
Type | Bellow Kit, drive shaft |
Placement on Vehicle | transmission sided, Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (100400)
- 1x Febi Clamping Clip (29816)
- 1x Febi Clamping Clip (45644)
- 1x Febi High Temperature Lubricant (03630)
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Mounting, control/trailing arm (22818)
- 2x Febi Mounting, control/trailing arm (22819)
Important compatibility info
Placement on Vehicle | Front Axle Left, Lower |
Paired article numbers | 01522 |
Cone Size | 17 mm |
Function | Ball Joint |
Type | Ball Joint |
Steering arm type | for control arm |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 01521 |
Placement on Vehicle | Front Axle Right, Lower |
Function | Ball Joint |
Cone Size | 17 mm |
Type | Ball Joint |
Steering arm type | for control arm |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with grease |
Function | Bellow Kit, drive shaft |
Inner diameter 2 | 100 mm |
Inner diameter 1 | 21 mm |
Material | Rubber |
Length | 120 mm |
Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (05240)
- 1x Febi Shaft Seal, drive shaft (05238)
- 1x Febi Nut, kingpin (02160)
- 6x Febi Bolt, drive shaft flange (03004)
- 1x Febi Spring Washer (03336)
- 1x Febi Circlip (03335)
- 1x Febi High Temperature Lubricant (03630)
Important compatibility info
Placement on Vehicle | Front Axle Left |
Paired article numbers | 22418 |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
External Thread Size | M10 x 1,5 |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Link/Coupling Rod, stabiliser bar (22415)
- 2x Febi Nut (22263)
Important compatibility info
Placement on Vehicle | Front Axle Right |
Paired article numbers | 22417 |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
External Thread Size | M10 x 1,5 |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Link/Coupling Rod, stabiliser bar (22416)
- 2x Febi Nut (22263)
Important compatibility info
Length | 178 mm |
Material | Steel |
Paired article numbers | 34092 |
External Thread Size | M10 x 1,25 |
Internal Thread Size | M12 x 1,25 |
Function | Tie Rod End |
Placement on Vehicle | Front Axle Left |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with crown nut |
Internal Thread Size | M12 x 1,25 |
Placement on Vehicle | Front Axle Right |
Length | 178 mm |
Material | Steel |
Paired article numbers | 34091 |
Function | Tie Rod End |
External Thread Size | M10 x 1,25 |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right Front |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Length | 116 mm |
Width | 44 mm |
Wear Warning Contact | excl. wear warning contact |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 15.5 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Replaces | 170626 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | inner, Front Axle Left, Front Axle Right |
Length | 204 mm |
Colour | Black |
Thread Length | 17.5 mm. 53 mm |
Thread Type | with right-hand thread |
Function | Tie Rod End |
External Thread Size | M14 x 1,5, M17 x 1,5 |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Bush, driver cab suspension |
Inner diameter | 55 mm |
Function | Bush, driver cab suspension |
Thickness | 56 mm |
Outer diameter | 87.5 mm |
Placement on Vehicle | Front |
Material | Rubber/Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Plastic |
Function | Expansion Tank, coolant |
Type | Expansion Tank, coolant |
Additional Information 2 | without lid |
for OE number | 6Q0 121 407 D |
Number of Connectors / Ports | 2 |
Additional Information | with coolant level sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 1035 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 8 |
Function | V-Ribbed Belt |
Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Ball Joint |
Function | Ball Joint |
Extra Description | ProKit |
External Thread Size | M16 x 1,5 |
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Additional Information 2 | with retaining ring |
Steering arm type | for control arm |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 930 mm |
Number of Connectors / Ports | 2 |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Spanner Size | 34 |
Type | Inner Tie Rod |
Function | Inner Tie Rod |
External Thread Size | M16 x 1,5 |
Additional Information | with lock nut |
Length | 305 mm |
Outer diameter | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 83.5 mm |
Outer diameter | 107 mm |
Additional Information 2 | with seal ring |
Spanner Size | 36 |
Bolt Head/Nut Design | External Hexagon |
Tightening Torque | 25 Nm |
Type | Cover, fuel filter |
Function | Cover, fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Oil Pressure Switch |
Function | Oil Pressure Switch |
Number of Connectors / Ports | 1 |
Pressure | 0.4 bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with gasket/seal |
Type | Coolant Flange |
for OE number | 11 11 8 511 205 |
Function | Coolant Flange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Inner Tie Rod |
Additional Information | with counter nut |
Placement on Vehicle | Front Axle Left |
Length | 310 mm |
Paired article numbers | 34812 |
External Thread Size | M14 x 1,5, M16 x 1,5 |
Extra Description | ProKit |
Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Opening Temperature | 79 °C |
Type | Thermostat, coolant |
Function | Thermostat, coolant |
Additional Information | with gasket/seal |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 175 mm |
Material | Steel |
Colour | Black |
Spanner Size | 17 |
Rod/Strut | Coupling Rod |
Thread Length | 20 mm |
Function | Link/Coupling Rod, stabiliser bar |
External Thread Size | M10 x 1,5 |
Additional Information | with lock nut |
Outer diameter | 13 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Hose, crankcase ventilation |
Material | Plastic |
Placement on Vehicle | Cylinder Head, Upper |
Additional Information | with quick coupling |
Extra Description | febi Plus |
Type | Hose, crankcase ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front, Front Axle Right |
Material | Rubber/Metal |
Outer diameter | 40 mm |
Thickness | 47 mm |
Inner diameter | 20 mm |
Type | Bushing, axle beam |
Function | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023