Important compatibility info
| Number of mounting bores | 8 |
| Transmission Type | Manual Transmission |
| Function | Flywheel |
| Extra Description | LuK DMF |
| Type | Flywheel |
Important compatibility info
| Number of mounting bores | 8 |
| Transmission Type | Manual Transmission |
| Function | Flywheel |
| Extra Description | LuK DMF |
| Type | Flywheel |
Important compatibility info
| Voltage | 12 V |
| Operating Mode | Electric |
| Type | Auxiliary water pump (cooling water circuit) |
| Function | Auxiliary water pump (cooling water circuit) |
Important compatibility info
| Voltage | 12 V |
| Operating Mode | Electric |
| Type | Auxiliary water pump (cooling water circuit) |
| Function | Auxiliary water pump (cooling water circuit) |
Important compatibility info
| for OE number | 003 250 92 15 |
| Function | Central Slave Cylinder, clutch |
| Type | Central Slave Cylinder, clutch |
| Number of mounting bores | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | 003 250 92 15 |
| Function | Central Slave Cylinder, clutch |
| Type | Central Slave Cylinder, clutch |
| Number of mounting bores | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Product met | Euro 5 |
| To be used with part number(s) | FK92100 |
| Placement on Vehicle | Front |
| Includes fitting kit | FK92100B |
| Extra Description | Approved |
| Function | Catalytic Converter |
| Guarantee | 2 years guarantee |
| Type | Catalytic Converter |
| Inspection Tag | E57-103R |
| Material | Ceramic |
Important compatibility info
| Product met | Euro 5 |
| To be used with part number(s) | FK92100 |
| Placement on Vehicle | Front |
| Includes fitting kit | FK92100B |
| Extra Description | Approved |
| Function | Catalytic Converter |
| Guarantee | 2 years guarantee |
| Type | Catalytic Converter |
| Inspection Tag | E57-103R |
| Material | Ceramic |
Important compatibility info
| To be used with part number(s) | FK91438 |
| Inspection Tag | E9-103R |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Extra Description | Approved |
| Product met | Euro 3 |
| Type | Catalytic Converter |
| Material | Ceramic |
Important compatibility info
| To be used with part number(s) | FK91438 |
| Inspection Tag | E9-103R |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Extra Description | Approved |
| Product met | Euro 3 |
| Type | Catalytic Converter |
| Material | Ceramic |
Important compatibility info
| Recommended additional repairs | Air Filter |
| Function | Mass Air Flow Sensor |
| Type | Mass Air Flow Sensor |
Important compatibility info
| Recommended additional repairs | Air Filter |
| Function | Mass Air Flow Sensor |
| Type | Mass Air Flow Sensor |
Important compatibility info
| Number of hub fastening holes | 8 |
| Pitch circle diameter, clutch pressure plate | 258 mm |
| Hub fastening hole diameter | 11.50 mm |
| External diameter, clutch pressure plate | 240 mm |
| Running surface internal diameter | 167.00 mm |
| Hub external diameter | 103.40 mm |
| Number of clutch pressure plate fastening holes | 9 |
| Hub internal diameter | 33 mm |
| Pitch circle diameter, hub | 75 mm |
| Number of Teeth | 137 |
| Function | Flywheel |
| Type | Flywheel |
| Number of EDC bores/notches | 58 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of hub fastening holes | 8 |
| Pitch circle diameter, clutch pressure plate | 258 mm |
| Hub fastening hole diameter | 11.50 mm |
| External diameter, clutch pressure plate | 240 mm |
| Running surface internal diameter | 167.00 mm |
| Hub external diameter | 103.40 mm |
| Number of clutch pressure plate fastening holes | 9 |
| Hub internal diameter | 33 mm |
| Pitch circle diameter, hub | 75 mm |
| Number of Teeth | 137 |
| Function | Flywheel |
| Type | Flywheel |
| Number of EDC bores/notches | 58 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 26 mm |
| Additional Information | with accessories |
| Material | Metal |
| Outer diameter | 155 mm |
| Additional Information 2 | with damping |
| Inner diameter | 10 mm |
| Number of grooves | 6 |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
| Extra Description | DriveAlign™ |
Additional Information
- 1x Gates Bolt and Nut Kit (SET132)
Important compatibility info
| Width | 26 mm |
| Additional Information | with accessories |
| Material | Metal |
| Outer diameter | 155 mm |
| Additional Information 2 | with damping |
| Inner diameter | 10 mm |
| Number of grooves | 6 |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
| Extra Description | DriveAlign™ |
Additional Information
- 1x Gates Bolt and Nut Kit (SET132)
Important compatibility info
| Includes fitting kit | FK11162B |
| Function | Soot/Particulate Filter, exhaust system |
| Product met | Euro 5 |
| Material | Silicon carbide |
| Labels & Certifications | Up to Euro 5 |
| Extra Description | Approved |
| Guarantee | 3 years guarantee |
| Inspection Tag | E24-103R |
| Type | Soot/Particulate Filter, exhaust system |
| To be used with part number(s) | FK11162, PP11162A, PP11162B |
Important compatibility info
| Includes fitting kit | FK11162B |
| Function | Soot/Particulate Filter, exhaust system |
| Product met | Euro 5 |
| Material | Silicon carbide |
| Labels & Certifications | Up to Euro 5 |
| Extra Description | Approved |
| Guarantee | 3 years guarantee |
| Inspection Tag | E24-103R |
| Type | Soot/Particulate Filter, exhaust system |
| To be used with part number(s) | FK11162, PP11162A, PP11162B |
Important compatibility info
| Title | Startpack Truck Booster Pack 12V/24V LGV's |
Additional Information
- Provides a 12 V DC power supply
- Fitted with an LED lighting system
- Can be left permanently connected to the mains system (the GYSPACK needs to be charged after every use)
- Battery can be charged to 100% maxmising its service life and efficiency
- Automatic, 230 V (12 V floating) charger
- Equipped with an easily replaceable external fuse (replacement fuse included)
- ON/OFF switch to prevent misuse
- A built-in battery tester to view the charge status of both internal batteries.
- Alarm system in instances of reversed polarity
- Copper cables (2 x 1.80 m, ø 25 mm²) with isolated, 600 A clamps
- 24V : 1600 Peak amps / 1300A Cranking (CC)
- 12V : 3200 Peak amps / 1450A Cranking (CC)
- Starts instantly
- 2-in-1 : 12 and 24 V starter and power supply
- cert026339 (2).pdf
Important compatibility info
| Voltage | 24 V |
| Control Range | 1,5+0,25 bar |
| Type | Air Dryer, compressed-air system |
| Cut-off Pressure | 12 bar |
| Function | Air Dryer, compressed-air system |
| Internal Thread Size | M22 x 1,5, M39 x 1,5, M10 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 24 V |
| Control Range | 1,5+0,25 bar |
| Type | Air Dryer, compressed-air system |
| Cut-off Pressure | 12 bar |
| Function | Air Dryer, compressed-air system |
| Internal Thread Size | M22 x 1,5, M39 x 1,5, M10 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rotation Direction | Clockwise rotation |
| Alternator Charge Current | 120 A |
| Voltage | 14 V |
| Function | Alternator |
| Type | Alternator |
| Recommended additional repairs | V-Belt/V-Ribbed Belt |
| Alternator type | excl. vacuum pump |
| Fastening Type | Double Pivot Lever |
| Replaces | 0124515042 |
| Replaced by | 1986A00842 |
Important compatibility info
| Rotation Direction | Clockwise rotation |
| Alternator Charge Current | 120 A |
| Voltage | 14 V |
| Function | Alternator |
| Type | Alternator |
| Recommended additional repairs | V-Belt/V-Ribbed Belt |
| Alternator type | excl. vacuum pump |
| Fastening Type | Double Pivot Lever |
| Replaces | 0124515042 |
| Replaced by | 1986A00842 |
Important compatibility info
| Length | 375 mm |
| Voltage | 24 V |
| Number of Teeth | 11 |
| Bore Diameter | 10.5 mm |
| Rotation Direction | Clockwise rotation |
| Rated Power | 5.4 kW |
| Number of mounting bores | 3 |
| Flange Diameter | 89 mm |
| Position / Degree | rechts ° |
| Clamp | 30, 50, 31 |
| Connecting Angle | 90 ° |
| Pinion Rest Position | 47.5 mm |
| Type | Starter |
| Bore Diameter 2 | 10.5 mm |
| Bore Diameter 3 | 10.5 mm |
| Starter Type | Floating pinion |
| Function | Starter |
| Fastening hole angle measurement [Degree] | 90 ° |
Important compatibility info
| Length | 375 mm |
| Voltage | 24 V |
| Number of Teeth | 11 |
| Bore Diameter | 10.5 mm |
| Rotation Direction | Clockwise rotation |
| Rated Power | 5.4 kW |
| Number of mounting bores | 3 |
| Flange Diameter | 89 mm |
| Position / Degree | rechts ° |
| Clamp | 30, 50, 31 |
| Connecting Angle | 90 ° |
| Pinion Rest Position | 47.5 mm |
| Type | Starter |
| Bore Diameter 2 | 10.5 mm |
| Bore Diameter 3 | 10.5 mm |
| Starter Type | Floating pinion |
| Function | Starter |
| Fastening hole angle measurement [Degree] | 90 ° |
Important compatibility info
| To be used with part number(s) | FK11340 |
| Labels & Certifications | Euro 4 |
| Function | Soot/Particulate Filter, exhaust system |
| Guarantee | 2 years guarantee |
| Inspection Tag | E9-103R |
| Material | Cordierite |
| Type | Soot/Particulate Filter, exhaust system |
| Placement on Vehicle | Left |
| Product met | Euro 4 |
Important compatibility info
| To be used with part number(s) | FK11340 |
| Labels & Certifications | Euro 4 |
| Function | Soot/Particulate Filter, exhaust system |
| Guarantee | 2 years guarantee |
| Inspection Tag | E9-103R |
| Material | Cordierite |
| Type | Soot/Particulate Filter, exhaust system |
| Placement on Vehicle | Left |
| Product met | Euro 4 |
Important compatibility info
| Number of mounting bores | 6 |
| Additional Information | with central slave cylinder |
| Additional Information 2 | with flywheel, with screw set |
| Adjustment | with automatic adjustment |
| Function | Clutch Kit |
| Extra Description | LuK RepSet DMF |
| Type | Clutch Kit |
Additional Information
- 1x LuK Screw Set, flywheel (411012210)
- 1x LuK Flywheel (415024110)
- 1x LuK Clutch Kit (624317133)
Important compatibility info
| Number of mounting bores | 6 |
| Additional Information | with central slave cylinder |
| Additional Information 2 | with flywheel, with screw set |
| Adjustment | with automatic adjustment |
| Function | Clutch Kit |
| Extra Description | LuK RepSet DMF |
| Type | Clutch Kit |
Additional Information
- 1x LuK Screw Set, flywheel (411012210)
- 1x LuK Flywheel (415024110)
- 1x LuK Clutch Kit (624317133)
Important compatibility info
| Weight | 7080 g |
| Length | 230 mm |
| Height | 128 mm |
| Additional Information 2 | with magnetic clutch |
| Voltage | 12 V |
| Number of Ribs | 6 |
| Belt Pulley Diameter | 120 mm |
| Inlet Diameter | 16.1 mm |
| Outlet Diameter | 15.3 mm |
| Mounting Type | Bolted |
| for OE number | A0002300511 |
| Refrigerant | R 134a |
| Compressor ID | 10PA17C |
| Quality | OE |
| Compressor Oil | ND-8 |
| Oil Fill Quantity | 150 ml |
| Number of grooves | 6 |
| Type | Compressor, air conditioning |
| Manufacturer Restriction | DENSO, MERCEDES-BENZ |
| Function | Compressor, air conditioning |
| Extra Info | DL-Pulley |
| Gross Weight | 7890 g |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023















