Proud to be a UK-based company
Contact us
Important compatibility info
| Outer diameter | 430 mm |
| Number of Wings | 9 |
| Weight | 0.583 kg |
| Function | Fan Wheel, engine cooling |
| Type | Fan Wheel, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.55
Important compatibility info
| Placement on Vehicle | Front Axle Left, Wheel Side, Front Axle Right |
| Thread Size | M10x1,5 |
| External Teeth, Wheel Side | 36 |
| Internal Teeth, wheel side | 33 |
| Weight | 2.126 kg |
| Number of Teeth, ABS ring | 48 |
| ABS Ring Diameter | 81 mm |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.55
Important compatibility info
| Thickness/Strength 1 | 16.5 mm |
| Function | Brake Pad Set, disc brake |
| Inspection Tag | ECE R90 Approved |
| Width | 69.5 mm |
| Length | 180.2 mm |
| Placement on Vehicle | Front Axle |
| Weight | 2.321 kg |
| Type | Brake Pad Set, disc brake |
| Additional Information 2 | with piston clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.55
Important compatibility info
| Weight | 0.53 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 143 mm |
| Width | 40 mm |
| Thickness | 75 mm |
| Spanner Size | 19 |
| Function | Tie Rod End |
| External Thread Size | M14 x 1,5 |
| Internal Thread Size | M16 x 1,5 |
| Type | Tie Rod End |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.55
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Paired article numbers | 44781 |
| Number of Connectors / Ports | 2 |
| Resistance | 1250 Ohm |
| Cable Length | 130 mm. 160 mm |
| Function | Sensor, wheel speed |
| Weight | 0.1135 kg |
| Type | Sensor, wheel speed |
| Additional Information | with bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.55
Important compatibility info
| Weight | 0.2 kg |
| Material | Plastic |
| Colour | Black |
| Combi Switch Function | with wipe-wash function, with rear wipe-wash function, with wipe interval function, with park light function |
| Function | Steering Column Switch |
| Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.55
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Weight | 0.230 kg |
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.55
Important compatibility info
| Length | 2643 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 8 |
| Weight | 0.311 kg |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.55
Important compatibility info
| Paired article numbers | 104542 |
| Number of Connectors / Ports | 2 |
| Resistance | 1150 Ohm |
| Length | 3665 mm |
| Cable Length | 3585 mm |
| Weight | 0.148 kg |
| Placement on Vehicle | Rear Axle Left |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.56
Important compatibility info
| Number of Connectors / Ports | 3 |
| Weight | 0.024 kg |
| Function | Sensor, crankshaft pulse |
| Type | Sensor, crankshaft pulse |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.56
Important compatibility info
| Function | Slave Cylinder, clutch |
| Weight | 0.150 kg |
| Type | Slave Cylinder, clutch |
| for OE number | 2182.16 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.56
Important compatibility info
| Material | Metal |
| Outer diameter | 34 mm |
| Operating Mode | Automatic |
| Weight | 0.293 kg |
| Type | Belt Tensioner, v-ribbed belt |
| Function | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.56
Important compatibility info
| Function | Tie Rod End |
| Weight | 0.77 kg |
| Placement on Vehicle | Front Axle Left |
| Length | 240 mm |
| Thickness | 77 mm |
| Spanner Size | 17 |
| Paired article numbers | 41932 |
| External Thread Size | M12 x 1,25 |
| Internal Thread Size | M14 x 1,5 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.56
Important compatibility info
| Weight | 0.151 kg |
| Placement on Vehicle | Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Cable Length | 1035 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
| Paired article numbers | 109726 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.57
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 179888 |
| Weight | 0.145 kg |
| Type | Splash Guard, brake disc |
| Extra Description | febi Plus |
| Function | Splash Guard, brake disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.57
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Front, Rear Axle Right |
| Material | Rubber/Metal |
| Function | Bushing, axle beam |
| Type | Bushing, axle beam |
| Weight | 0.578 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.58
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Material | Cast Aluminium |
| Outer diameter | 131 mm |
| Weight | 0.54 kg |
| Function | Suspension Strut Support Mount |
| Inner diameter | 30 mm |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.58
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 197142 |
| Weight | 0.180 kg |
| Type | Splash Guard, brake disc |
| Function | Splash Guard, brake disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.58
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Material | Rubber/Metal |
| Inner diameter | 12 mm |
| Function | Suspension Strut Support Mount |
| Weight | 0.54 kg |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.58
Important compatibility info
| Weight | 1.459 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Spanner Size | 32, 15 |
| Function | Tie Rod |
| External Thread Size | M16 x 1,5 |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information 2 | with clamps, with steering bellow |
| Additional Information | with nuts |
| for OE number | 09 20 007 S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (44446)
- 1x Febi Tie Rod End (41947)
- 1x Febi Bellow, steering (39602)
£28.59
Important compatibility info
| Replaces | 108589 |
| Rim Hole Number | 5 -Hole |
| Rotor Style | Solid |
| Weight | 3.348 kg |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 259 mm |
| Thickness | 30.3 mm |
| Brake Disc Thickness | 9 mm |
| Minimum thickness | 7.5 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 62 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.59
Important compatibility info
| Thread Size | M8,0 |
| Internal Teeth, wheel side | 25 |
| Weight | 0.001 kg |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.59
Important compatibility info
| Length | 367 mm |
| Paired article numbers | 06629 |
| Weight | 1.050 kg |
| Spanner Size | 22 |
| Placement on Vehicle | Front Axle Left |
| Function | Tie Rod |
| Type | Tie Rod |
| for OE number | 32 11 1 140 464 |
| Adjustable | Adjustable |
| External Thread Size | M18 x 1,5, M10 x 1 |
| Additionally Required Parts | BMW 32 11 1 140 464 |
| Additionally required parts | Tab washer |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.59
Important compatibility info
| Material | Rubber/Metal |
| Outer diameter | 87 mm. 112 mm |
| Weight | 0.856 kg |
| Inner diameter | 14 mm |
| Placement on Vehicle | Front Axle |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Height | 69 mm |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.59
Important compatibility info
| Material | Cast Aluminium |
| Number of Wings | 7 |
| Water pump impeller material | Plastic |
| Function | Water Pump, engine cooling |
| Seal Material | Rubber |
| Weight | 0.641 kg |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.59
Important compatibility info
| Paired article numbers | 06628 |
| Length | 215 mm |
| Cone Size | 14 mm |
| Placement on Vehicle | Front Axle Right |
| Function | Tie Rod |
| Weight | 1.050 kg |
| External Thread Size | M18 x 1,5, M10 x 1 |
| Type | Tie Rod |
| for OE number | 32 11 1 140 464 |
| Adjustable | Adjustable |
| Additionally Required Parts | BMW 32 11 1 140 464 |
| Additionally required parts | Tab washer |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.59
Important compatibility info
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Weight | 3.85 kg |
| Function | Brake Disc |
| Surface | Coated |
| Centering Diameter | 55 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Minimum thickness | 16 mm |
| Brake Disc Thickness | 18 mm |
| Thickness | 43 mm |
| Outer diameter | 235 mm |
| Type | Brake Disc Rotor |
| Rim Hole Number | 4 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.59
Important compatibility info
| Function | Joint Kit, drive shaft |
| Type | Joint Kit, drive shaft |
| Weight | 2.0 kg |
| Internal Teeth, wheel side | 24 |
| Seal Diameter | 53.5 mm |
| External Teeth, Wheel Side | 25 |
| Outer diameter | 84.5 mm |
| Length | 157 mm |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| External Thread Size | M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.60
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 328 mm |
| Weight | 1.668 kg |
| Outer diameter 1 | 83 mm |
| Outer diameter 2 | 89 mm |
| Type | Suspension Spring |
| Function | Suspension Spring |
| Wire Diameter | 12.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.60
Important compatibility info
| Weight | 0.42 kg |
| Extra Description | ProKit |
| Height | 134 mm |
| Width | 109 mm |
| Rated Power | 27 W |
| Light Design | LED |
| Mounting Type | Fully assembled |
| Cable Length | 1500 mm |
| Depth | 56 mm |
| Voltage from | 10 V |
| Light Distribution | Long-range illumination |
| Voltage to | 30 V |
| Protection Type (IP Code) | IP67 |
| Fulfils ECE norm | R10, R23 |
| Lumen | 2000 lm |
| Temperature range to | 50 °C |
| Function | Worklight |
| Inspection Tag | EMC |
| Housing material | Aluminium |
| Temperature range from | -40 °C |
| Additional Information | with fastening/mounting material |
| Type | Worklight |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.60
Important compatibility info
| Weight | 0.2 kg |
| Material | Plastic |
| Voltage | 12 V |
| Colour | Black |
| Number of Connectors / Ports | 13 |
| Combi Switch Function | with indicator function, with hazard warning light function, with high beam function, with park light function, with headlight flasher |
| Function | Steering Column Switch |
| Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.60
Important compatibility info
| Weight | 0.390 kg |
| Placement on Vehicle | Lower |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 70 |
| Timing Chain Size | G68HR |
| Function | Timing Chain |
| Type | Timing Chain |
| Additionally Required Parts | 13 52 7 797 906 |
| Replaces | 29865 |
| Additionally required parts | Sprocket/Gear, oil pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.61
Important compatibility info
| Weight | 0.322 kg |
| Additional Information 2 | with screw set |
| Additional Information | with gasket/seal |
| Type | Control Valve, camshaft adjustment |
| Function | Control Valve, camshaft adjustment |
| Extra Description | febi Plus |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control Valve, camshaft adjustment (170182)
- 1x Febi Seal, camshaft adjustment (47377)
- 3x Febi Screw (100646)
£28.61
Important compatibility info
| Weight | 0.120 kg |
| Function | Tensioner, timing chain |
| Operating Mode | Hydraulic |
| Type | Tensioner, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.61
Important compatibility info
| Weight | 0.962 kg |
| Material | Cast Aluminium |
| Number of Teeth | 20 |
| Number of Wings | 5 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
| Type | Water Pump, engine cooling |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.62
Important compatibility info
| Manufacturer | CITROEN DS PEUGEOT TOYOTA VAUXHALL |
| Length | 155.2 mm |
| Placement on Vehicle | Front Axle |
| Width | 70.4 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Additional Information 2 | with piston clip |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 17.1 mm |
| Weight | 1.998 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.62
Important compatibility info
| Weight | 0.712 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Function | Bushing, axle beam |
| Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.62
Important compatibility info
| Function | Link/Coupling Rod, stabiliser bar |
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 196172 |
| Diameter | 35 mm |
| Material | Steel |
| Type | Link/Coupling Rod, stabiliser bar |
| Weight | 0.614 kg |
| Thread Length | 28 mm |
| Rod/Strut | Coupling Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.64
Important compatibility info
| Rod/Strut | Coupling Rod |
| Thickness | 1 mm |
| Thread Length | 28 mm |
| Placement on Vehicle | Front Axle Right |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
| Weight | 0.614 kg |
| Paired article numbers | 196167 |
| External Thread Size | M12 x 1,5 |
| Material | Steel |
| Diameter | 1 mm |
| Length | 200 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.64
Important compatibility info
| Length | 690 mm |
| Number of Connectors / Ports | 2 |
| Weight | 0.055 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.64
Important compatibility info
| Weight | 1.2 kg |
| Additional Information 2 | with screw set |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 39 mm |
| Outer diameter | 84 mm |
| Inner diameter | 45 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 6x Febi Bolt, drive shaft flange (02592)
- 2x Febi Screw (02102)
- 1x Febi Bolt, brake disc (05560)
- 1x Febi Nut, kingpin (02346)
- 2x Febi Packing Plate, drive shaft flange (02593)
- 1x Febi Circlip (03405)
£28.64
Important compatibility info
| Weight | 0.5 kg |
| Placement on Vehicle | Front Axle Left, Lower, Rear, Front Axle Right |
| Material | Rubber/Metal |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.65
Important compatibility info
| Weight | 0.13 kg |
| Placement on Vehicle | transmission sided |
| Width | 156 mm |
| Thickness | 11 mm |
| Inner diameter | 93 mm |
| Function | Shaft Seal, crankshaft |
| Type | Shaft Seal, crankshaft |
| Additional Information 2 | with flange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.66
Important compatibility info
| Weight | 0.40 kg |
| Number of Ribs | 6 |
| Function | Alternator Freewheel Clutch |
| Additional Information 2 | with lid |
| Type | Alternator Freewheel Clutch |
| for OE number | 03C 903 119 C |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.66
Important compatibility info
| Function | Sensor, crankshaft pulse |
| Type | Sensor, crankshaft pulse |
| Number of Connectors / Ports | 3 |
| Weight | 0.016 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.66
Important compatibility info
| Weight | 0.2 kg |
| Housing Diameter | 18 mm |
| Placement on Vehicle | Left Rear, Right Rear |
| Length | 674 mm |
| Piston conrod diameter | 8 mm |
| Eject Force | 330 N |
| Stroke | 234 mm |
| Mounting points diameter | 17.8 mm |
| Housing length | 388.5 mm |
| Type | Gas Spring, boot/cargo area |
| Function | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.66
Important compatibility info
| Weight | 1.5 kg |
| Paired article numbers | 10105 |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with ball bearing |
| Type | Repair Kit, suspension strut support mount |
| Function | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (09379)
- 1x Febi Rolling Bearing, suspension strut support mount (10091)
£28.67
Important compatibility info
| Thickness/Strength 1 | 19 mm |
| Type | Brake Pad Set, disc brake |
| Cable Length | 260 mm |
| Function | Brake Pad Set, disc brake |
| Inspection Tag | ECE R90 Approved |
| Placement on Vehicle | Rear Axle |
| Length | 164.7 mm |
| Width | 66.4 mm |
| Wear Warning Contact | incl. wear warning contact |
| Weight | 2.262 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.67
Important compatibility info
| Max. Length | 557 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Pipe Diameter | 47 mm. 38.5 mm |
| Weight | 1.550 kg |
| Type | Shock Absorber |
| Mounting bores distance | 557 mm |
| Placement on Vehicle | Rear Axle Right |
| Bore Diameter | 14 mm |
| Function | Shock Absorber |
| Shock Absorber Type | Oil Pressure |
| Min. Length | 342 mm |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.67
Important compatibility info
| Weight | 0.327 kg |
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.67
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023