Important compatibility info
Placement on Vehicle | Rear Axle Right |
Paired article numbers | 193016 |
Number of Connectors / Ports | 2 |
Cable Length | 540 mm |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Clutch, radiator fan |
Function | Clutch, radiator fan |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Ribs | 4 |
Pulleys | with belt pulley |
Alternator Charge Current | 65 A |
Belt Pulley Diameter | 54 mm |
Current Strength | 65 A |
Type | Alternator |
Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Ribs | 6 |
Voltage | 12 V |
Function | Alternator |
Alternator Charge Current | 90 A |
Belt Pulley Diameter | 50 mm |
Type | Alternator |
Current Strength | 90 A |
Pulleys | with freewheel belt pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Clutch, radiator fan |
Function | Clutch, radiator fan |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Ribs | 4 |
Pulleys | with belt pulley |
Alternator Charge Current | 75 A |
Belt Pulley Diameter | 55 mm |
Current Strength | 75 A |
Type | Alternator |
Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Ribs | 7 |
Pulleys | with freewheel belt pulley |
Alternator Charge Current | 130 A |
Belt Pulley Diameter | 65 mm |
Current Strength | 130 A |
Type | Alternator |
Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Ribs | 6 |
Pulleys | with freewheel belt pulley |
Alternator Charge Current | 125 A |
Belt Pulley Diameter | 71 mm |
Current Strength | 125 A |
Type | Alternator |
Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Alternator Charge Current | 110 A |
Pulleys | with freewheel belt pulley |
Voltage | 12 V |
Number of Ribs | 6 |
Function | Alternator |
Type | Alternator |
Current Strength | 110 A |
Belt Pulley Diameter | 50 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Number of Connectors / Ports | 2 |
Cable Length | 740 mm |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Ribs | 6 |
Pulleys | with freewheel belt pulley |
Alternator Charge Current | 110 A |
Belt Pulley Diameter | 51 mm |
Current Strength | 110 A |
Type | Alternator |
Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Injector, urea injection |
Function | Injector, urea injection |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Type | Dust Cover Kit, shock absorber |
Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (18375)
- 2x Febi Protective Cap/Bellow, shock absorber (19286)
Important compatibility info
Height | 130 mm |
Outer diameter | 54 mm |
Additional Information 2 | with seal ring |
Inner diameter | 20 mm |
Filter type | Filter Insert |
Inner diameter 1 | 18 mm |
Type | Oil Filter |
Function | Oil Filter |
Gasket outer diameter | 70.7 mm |
Gasket inner diameter | 63.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Type | Dust Cover Kit, shock absorber |
Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (23518)
- 2x Febi Protective Cap/Bellow, shock absorber (19286)
Important compatibility info
Placement on Vehicle | Rear Axle |
Type | Dust Cover Kit, shock absorber |
Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (23588)
- 2x Febi Protective Cap/Bellow, shock absorber (19286)
Important compatibility info
Additional Information | with gasket/seal |
Outer diameter | 38.5 mm |
Operating Mode | Electric |
Number of Connectors / Ports | 2 |
Opening Temperature | 105 °C |
Housing Type | with housing |
Type | Thermostat, coolant |
Function | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Wings | 7 |
Type | Fan, engine cooling |
Function | Fan, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Aluminium |
Additional Information 2 | with brake fluid reservoir |
Type | Brake Master Cylinder |
Function | Brake Master Cylinder |
Driver Position | for right-hand drive vehicles |
Piston Diameter | 23.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | EGR Module |
Function | EGR Module |
for OE number | 98 021 940 80 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Teeth | 10 |
Rated Power | 2.0 kW |
Type | Starter |
Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Connector Shape | rectangular |
Additional Information 2 | with seal ring |
Colour | Black |
Number of Connectors / Ports | 3 |
Type | Sensor, camshaft position |
Function | Sensor, camshaft position |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Operating Mode | electromagnetic |
Type | Water Pump, engine cooling |
Number of Wings | 16 |
Water pump impeller material | Plastic |
Seal Material | Rubber |
Housing material | Cast Aluminium |
Function | Water Pump, engine cooling |
for OE number | 23959580 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Operating Mode | electromagnetic |
Water pump impeller material | Plastic |
Housing material | Cast Aluminium |
Number of Wings | 16 |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Seal Material | Rubber |
for OE number | 23959595 |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Housing material | Aluminium |
Operating Mode | electromagnetic |
Seal Material | Rubber |
for OE number | 23959585 |
Function | Water Pump, engine cooling |
Water pump impeller material | Plastic |
Type | Water Pump, engine cooling |
Number of Wings | 16 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Alternator Charge Current | 70 A |
Number of Ribs | 3 |
Voltage | 12 V |
Pulleys | with belt pulley |
Belt Pulley Diameter | 60 mm |
Type | Alternator |
Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Opening Temperature | 87 °C |
Function | Thermostat, coolant |
Type | Thermostat, coolant |
Outer diameter | 34.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Shock Absorber Design | Telescopic Shock Absorber |
Shock Absorber Type | Oil Pressure |
Placement on Vehicle | Rear Axle |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Max. Length | 903 mm |
Min. Length | 558 mm |
Pipe Diameter | 80 mm. 70 mm |
Mounting points diameter | 20 mm |
Piston conrod diameter | 16 mm |
Type | Shock Absorber |
Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Teeth | 27 |
Placement on Vehicle | Right |
Operating Mode | Automatic |
Paired article numbers | 178678 |
Type | Adjuster, braking system |
Function | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Fuel filter |
Type | Fuel filter |
Filter type | In-Line Filter, with connection for water sensor, with water drain screw |
Pipe Diameter | 10 mm. 8 mm |
Height | 128 mm |
Additional Information | with valve |
Outer diameter | 99 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023