Important compatibility info
Function | Dust Cover Kit, shock absorber |
Type | Dust Cover Kit, shock absorber |
Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (181061)
- 2x Febi Protective Cap/Bellow, shock absorber (180464)
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Height | 27.5 mm |
Material | PA (polyamide) |
Inner diameter 1 | 60 mm |
Inner diameter 2 | 62 mm |
Outer diameter 1 | 97 mm |
Outer diameter 2 | 86 mm |
Type | Rolling Bearing, suspension strut support mount |
Function | Rolling Bearing, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Material | Cast Iron |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 182004 |
Type | Brake Caliper |
Function | Brake Caliper |
Brake caliper piston diameter | 60 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thread Size | M16x1,6 |
Placement on Vehicle | Front Axle Right |
Type | Drive Shaft |
Function | Drive Shaft |
Additional Information 2 | with bolts/screws |
Transmission-side joint diameter | 109.7 mm |
External Teeth, Wheel Side | 36 |
Min. Length | 783 mm |
Wheel Sided Joint Diameter | 97.9 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Mounting Kit, driver cab stabiliser |
Function | Mounting Kit, driver cab stabiliser |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 100 mm |
Outer diameter | 83 mm |
Filter type | Spin-on Filter |
Seal Diameter | 63 mm |
Type | Oil Filter |
Function | Oil Filter |
Internal Thread Size | M20 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | febi Plus |
Function | Control Unit, glow time |
Type | Control Unit, glow time |
Number of Connectors / Ports | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Teeth, Diff.Side | 24 |
Min. Length | 625 mm |
External Teeth, Wheel Side | 30 |
Thread Size | M22x1,5 |
Additional Information 2 | with nut |
Function | Drive Shaft |
Type | Drive Shaft |
Transmission-side joint diameter | 81.5 mm |
Wheel Sided Joint Diameter | 90 mm |
Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thread Size | M20x1,5 |
External Teeth, Diff.Side | 27 |
Min. Length | 614 mm |
Function | Drive Shaft |
Type | Drive Shaft |
Wheel Sided Joint Diameter | 89.1 mm |
Transmission-side joint diameter | 81.6 mm |
Placement on Vehicle | Front Axle Left |
Additional Information 2 | with nut |
External Teeth, Wheel Side | 25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 2 |
Function | Switch, clutch control (cruise control) |
Type | Switch, clutch control (cruise control) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
External Teeth, Wheel Side | 30 |
Thread Size | M22x1,5 |
Additional Information 2 | with nut |
Transmission-side joint diameter | 89 mm |
Function | Drive Shaft |
Type | Drive Shaft |
Min. Length | 628 mm |
External Teeth, Diff.Side | 24 |
Wheel Sided Joint Diameter | 90 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | before catalytic converter |
Number of Connectors / Ports | 2 |
Cable Length | 623 mm |
Type | Sensor, exhaust gas temperature |
Function | Sensor, exhaust gas temperature |
External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Thread Size | M27x1,5 |
Bolt Hole Circle Diameter | 94 mm |
Bore Diameter | 10.5 mm |
External Teeth, Wheel Side | 30 |
Number of mounting bores | 6 |
Min. Length | 651 mm |
Wheel Sided Joint Diameter | 94 mm |
Transmission-side joint diameter | 108 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Thread Size | M20x1,5 |
External Teeth, Wheel Side | 24 |
External Teeth, Diff.Side | 25 |
Min. Length | 627 mm |
Transmission-side joint diameter | 68.5 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
Internal Teeth, wheel side | 34 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Control, swirl flaps (induction pipe) |
Function | Control, swirl flaps (induction pipe) |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 112 mm |
Width | 66 mm |
Material | PU (Polyurethane) |
Type | Rubber Buffer, suspension |
Function | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Plastic |
Outer diameter | 70 mm |
Operating Mode | Automatic |
Type | Belt Tensioner, v-ribbed belt |
Function | Belt Tensioner, v-ribbed belt |
Width of castor bearing surface | 26 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Exhaust Side |
Number of Teeth | 48 |
Type | Camshaft Adjuster |
Function | Camshaft Adjuster |
Extra Description | febi Plus |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 13 mm |
Material | Steel |
Outer diameter | 22 mm |
Spanner Size | 12 |
Surface | Zinc-coated |
Thread Length | 13 mm |
Bolt Head/Nut Design | Hexagon Socket |
Type | Screw Plug, automatic transmission casing |
Function | Screw Plug, automatic transmission casing |
Screw length below head | 13 mm |
External Thread Size | M22 x 1,5 |
Replaces | 38179 |
Additional Information 2 | without seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | Requires special tools for mounting |
Chain Type | Silent Chain, Closed chain |
Number of Chain Links | 78 |
Type | Chain, oil pump drive |
Function | Chain, oil pump drive |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Lower |
Chain Type | Simplex, Closed chain |
Number of Chain Links | 76 |
Type | Timing Chain |
Function | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Upper |
Chain Type | Simplex, Closed chain |
Number of Chain Links | 100 |
Type | Timing Chain |
Function | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right |
Paired article numbers | 188782 |
Surface | primed |
Type | Cover, headlamp cleaning system |
Function | Cover, headlamp cleaning system |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Intake Side |
Number of Teeth | 46 |
Type | Camshaft Adjuster |
Function | Camshaft Adjuster |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Chain Type | Simplex, Closed chain |
Number of Chain Links | 142 |
Type | Timing Chain |
Function | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | Requires special tools for mounting |
Chain Type | Simplex, Closed chain |
Number of Chain Links | 60 |
Type | Chain, oil pump drive |
Function | Chain, oil pump drive |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Intake Side |
Type | Camshaft |
Function | Camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Tensile Cord Material | Aramid |
Length | 918 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 7 |
Alternator type | for starter generator |
Type | V-Ribbed Belt |
Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 2 |
Cable Length | 355 mm |
Type | Sensor, crankshaft pulse |
Function | Sensor, crankshaft pulse |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023