Important compatibility info
| Placement on Vehicle | Rear Axle Left, Front, Rear Axle Right | 
| Material | Aluminium, Rubber, Plastic | 
| Outer diameter | 99 mm | 
| Thickness | 92 mm | 
| Paired article numbers | 45804 | 
| Function | Bushing, axle beam | 
| Type | Bushing, axle beam | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 199 mm | 
| Width | 132 mm | 
| Voltage | 12 V. 24 V | 
| Inspection Tag | EMC, ADR | 
| Bulb Type | H1 | 
| Rated Power | 55 W, 70 W | 
| Light Design | Halogen | 
| Cable Length | 260 mm | 
| Protection Type (IP Code) | IP67 | 
| Type | Rotating Beacon | 
| Fulfils ECE norm | R65, R10 | 
| Housing material | Plastic | 
| Temperature range from | -30 °C | 
| Temperature range to | 50 °C | 
| Function | Rotating Beacon | 
| Extra Description | ProKit | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Eject Force | 660 N | 
| Stroke | 134 mm | 
| Placement on Vehicle | Left Rear | 
| Mounting points diameter | 16.5 mm | 
| Piston conrod diameter | 10 mm | 
| Type | Gas Spring, boot/cargo area | 
| Function | Gas Spring, boot/cargo area | 
| Housing length | 283.5 mm | 
| Housing Diameter | 24 mm | 
| Length | 451 mm | 
| Paired article numbers | 179825 | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Sheet Steel | 
| Steering arm type | Control Arm | 
| Paired article numbers | 19981 | 
| Placement on Vehicle | Front Axle Right, Lower | 
| Function | Control/Trailing Arm, wheel suspension | 
| Type | Control/Trailing Arm, wheel suspension | 
| Replaces | 06484 | 
| Additional Information 2 | with ball joint | 
| Additional Information | with rubber mounts | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Sheet Steel | 
| Steering arm type | Control Arm | 
| Paired article numbers | 19980 | 
| Replaces | 06490 | 
| Placement on Vehicle | Front Axle Left, Lower | 
| Function | Control/Trailing Arm, wheel suspension | 
| Type | Control/Trailing Arm, wheel suspension | 
| Additional Information 2 | with ball joint | 
| Additional Information | with rubber mounts | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 74 mm | 
| Inner diameter | 24 mm | 
| Function | Tensioner Pulley, timing belt | 
| Replaces | 15176 | 
| Type | Tensioner Pulley, timing belt | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Slave Cylinder | 
| Type | Slave Cylinder | 
| Stroke | 48 mm | 
| Inner diameter | 8 mm | 
| External Thread Size | M8 x 1,25, M12 x 1,5 | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 3 | 
| Function | Sensor, coolant level | 
| Length | 136 mm | 
| Outer diameter | 8 mm | 
| Type | Sensor, coolant level | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Spanner Size | 24 | 
| Number of Connectors / Ports | 3 | 
| Type | Pressure Switch, air conditioning | 
| Function | Pressure Switch, air conditioning | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) | 
| Cooling Hose | from expansion tank to engine cooler | 
| Type | Radiator Hose | 
| Function | Radiator Hose | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 13 | 
| Combi Switch Function | with wipe-wash function, with wipe interval function | 
| Type | Switch, windscreen wiper interval | 
| Function | Switch, windscreen wiper interval | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Housing material | Cast Aluminium | 
| Number of Wings | 14 | 
| Function | Water Pump, engine cooling | 
| Water pump impeller material | Plastic | 
| Seal Material | Paper | 
| Additional Information | with gasket/seal | 
| Type | Water Pump, engine cooling | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 50 mm | 
| Number of Connectors / Ports | 3 | 
| Function | Sensor, camshaft position | 
| Outer diameter | 17.8 mm | 
| Length | 51 mm | 
| Type | Sensor, camshaft position | 
| Additional Information 2 | with seal ring | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right | 
| Width | 48 mm | 
| Outer diameter | 84 mm | 
| Inner diameter | 49 mm | 
| Bearing Type | Angular Ball Bearing | 
| Function | Wheel Bearing Kit | 
| Type | Wheel Bearing Kit | 
| Additional Information 2 | with retaining ring, with crown nut | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Hose, crankcase ventilation | 
| Inner diameter | 16 mm | 
| Hose Length | 430 mm | 
| Extra Description | febi Plus | 
| Type | Hose, crankcase ventilation | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Rubber/Metal | 
| for OE number | 03 44 537 S1 | 
| Placement on Vehicle | Front Axle | 
| Additional Information 2 | with ball bearing, with fastening material | 
| Type | Repair Kit, suspension strut support mount | 
| Function | Repair Kit, suspension strut support mount | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Rolling Bearing, suspension strut support mount (27996)
 - 1x Febi Suspension Strut Support Mount (27352)
 - 3x Febi Screw (27358)
 
Important compatibility info
| Outer diameter | 139 mm | 
| Number of Coils | 7 | 
| Function | Suspension Spring | 
| Length | 359 mm | 
| Placement on Vehicle | Front Axle | 
| Wire Diameter | 12.5 mm | 
| Type | Suspension Spring | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Paired article numbers | 177007 | 
| Placement on Vehicle | Front Axle Right | 
| Number of Connectors / Ports | 2 | 
| Cable Length | 705 mm | 
| Type | Sensor, wheel speed | 
| Function | Sensor, wheel speed | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 2 | 
| Type | Switch, tailgate release | 
| Extra Description | febi Plus | 
| Function | Switch, tailgate release | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left Front | 
| Bearing/Mounting Type | Hydro Mount | 
| Function | Mounting, engine | 
| Type | Mounting, engine | 
| for OE number | 06 84 681 | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
                  
                
                  
                
                  
                
                  
                
                  
                
                  
                All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023


















