Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 363 mm |
| Inner diameter | 105 mm |
| Bolt Hole Circle Diameter | 335 mm |
| Type | Wheel Hub |
| Function | Wheel Hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Hub (170421)
- 5x Febi Screw (104691)
- 3x Febi Pulley Bolt (01202)
Important compatibility info
| Net weight | 1.450 kg |
| Number of Poles | 5 -pin connector |
| Operating Mode | Electric |
| Weight | 1.658 kg |
| Material | Metal |
| Connector Shape | oval |
| Function | EGR Valve |
| Additional Information | without gasket/seal |
| Type | EGR Valve |
Important compatibility info
| Net weight | 1.450 kg |
| Number of Poles | 5 -pin connector |
| Operating Mode | Electric |
| Weight | 1.658 kg |
| Material | Metal |
| Connector Shape | oval |
| Function | EGR Valve |
| Additional Information | without gasket/seal |
| Type | EGR Valve |
Important compatibility info
| Multi-piece | one-piece |
| Length | 604 mm |
| No. of holes 2 | 4 |
| Function | Propshaft, axle drive |
| Type | Propshaft, axle drive |
| Bolt Hole Circle Diameter 1 | 95 mm |
| Bolt Hole Circle Diameter 2 | 79 mm |
| No. of holes 1 | 4 |
Important compatibility info
| Number of grooves | 6 |
| Compressor Oil | ND-8 |
| Extra Info | DL-Pulley |
| Function | Compressor, air conditioning |
| Manufacturer Restriction | DENSO, TOYOTA |
| Oil Fill Quantity | 60 ml |
| Quality | OE |
| Compressor ID | 5SER09C |
| Refrigerant | R 134a |
| Belt Pulley Diameter | 100 mm |
| Number of Ribs | 6 |
| Height | 128 mm |
| Length | 216.9 mm |
| for OE number | 88310-0D230 ; 88310- |
| Inlet Diameter | 18.3 mm |
| Weight | 3570 g |
| Outlet Diameter | 15.5 mm |
| Mounting Type | Bolted |
| Gross Weight | 4380 g |
| Type | Compressor, air conditioning |
Important compatibility info
| Number of grooves | 6 |
| Compressor Oil | ND-8 |
| Extra Info | DL-Pulley |
| Function | Compressor, air conditioning |
| Manufacturer Restriction | DENSO, TOYOTA |
| Oil Fill Quantity | 60 ml |
| Quality | OE |
| Compressor ID | 5SER09C |
| Refrigerant | R 134a |
| Belt Pulley Diameter | 100 mm |
| Number of Ribs | 6 |
| Height | 128 mm |
| Length | 216.9 mm |
| for OE number | 88310-0D230 ; 88310- |
| Inlet Diameter | 18.3 mm |
| Weight | 3570 g |
| Outlet Diameter | 15.5 mm |
| Mounting Type | Bolted |
| Gross Weight | 4380 g |
| Type | Compressor, air conditioning |
Important compatibility info
| Extra Description | LuK SAC |
| Adjustment | with automatic adjustment |
| Diameter | 240 mm |
| Type | Clutch Kit |
| Function | Clutch Kit |
| Additional Information 2 | with clutch release bearing |
Additional Information
- 1x LuK Clutch Pressure Plate (124089710)
- 1x LuK Clutch Disc (324068510)
- 1x LuK Clutch Release Bearing (500158010)
Important compatibility info
| Extra Description | LuK SAC |
| Adjustment | with automatic adjustment |
| Diameter | 240 mm |
| Type | Clutch Kit |
| Function | Clutch Kit |
| Additional Information 2 | with clutch release bearing |
Additional Information
- 1x LuK Clutch Pressure Plate (124089710)
- 1x LuK Clutch Disc (324068510)
- 1x LuK Clutch Release Bearing (500158010)
Important compatibility info
| Compressor ID | PXC14/6SAS14C |
| Quality | OE-EQUIVALENT |
| Manufacturer Restriction | SANDEN-EQUIVALENT, DENSO--EQUIVALENT |
| Voltage | 12 V |
| Additional Information 2 | with seal ring |
| Refrigerant | R 1234yf, R 134a |
| Outlet Diameter | 19.7 mm |
| Connector Shape | oval |
| Compressor Oil | PAG 46 YF |
| Oil Fill Quantity | 80 ml |
| Type | Compressor, air conditioning |
| Number of grooves | 5 |
| Function | Compressor, air conditioning |
| Extra Description | EASY FIT |
| Inlet Diameter | 26.2 mm |
| Pulleys | with v-ribbed belt pulley |
| Belt Pulley Diameter | 115 mm |
Additional Information
Technical Information
Prefilled with the correct type of oil. The amount must be appropriately chosen for the application.
Important compatibility info
| Compressor ID | PXC14/6SAS14C |
| Quality | OE-EQUIVALENT |
| Manufacturer Restriction | SANDEN-EQUIVALENT, DENSO--EQUIVALENT |
| Voltage | 12 V |
| Additional Information 2 | with seal ring |
| Refrigerant | R 1234yf, R 134a |
| Outlet Diameter | 19.7 mm |
| Connector Shape | oval |
| Compressor Oil | PAG 46 YF |
| Oil Fill Quantity | 80 ml |
| Type | Compressor, air conditioning |
| Number of grooves | 5 |
| Function | Compressor, air conditioning |
| Extra Description | EASY FIT |
| Inlet Diameter | 26.2 mm |
| Pulleys | with v-ribbed belt pulley |
| Belt Pulley Diameter | 115 mm |
Additional Information
Technical Information
Prefilled with the correct type of oil. The amount must be appropriately chosen for the application.
Important compatibility info
| Fuel Type | Diesel |
| Injection System | Common Rail |
| Type | Injector |
| Manufacturer Restriction | BOSCH |
| Function | Injector |
| Gross Weight | 0.756 kg |
Important compatibility info
| Fuel Type | Diesel |
| Injection System | Common Rail |
| Type | Injector |
| Manufacturer Restriction | BOSCH |
| Function | Injector |
| Gross Weight | 0.756 kg |
Important compatibility info
| Function | Fuel Pump |
| Type | Fuel Pump |
Important compatibility info
| Function | Fuel Pump |
| Type | Fuel Pump |
Important compatibility info
| Function | Fuel Feed Unit |
| Type | Fuel Feed Unit |
| Operating Mode | Electric |
Important compatibility info
| Function | Fuel Feed Unit |
| Type | Fuel Feed Unit |
| Operating Mode | Electric |
Important compatibility info
| Placement on Vehicle | Left |
| Additional Information 2 | with bulbs, with motor for headlamp levelling |
| Voltage | 12 V |
| Vehicle Equipment | for vehicles without xenon light |
| Paired article numbers | 1LL 011 165-741 |
| Bulb Type | PY21W, W21W, HIR2 |
| Light Function | with position light, with low beam, with daytime running light, with indicator, with high beam |
| Left-hand / Right-hand Traffic | for left-hand traffic |
| Light Design | Halogen, DE |
| Number of light functions | 5 |
| Registration Type | ECE approved |
| Code | AVN |
| Country Version | Europe |
| Type | Headlight |
| Function | Headlight |
Additional Information
Brief Information
*** Original spare part
- 1x Hella Bulb, direction indicator (8GA006841-121)
- 1x Hella Bulb, spotlight (8GH009319-001)
- 1x Hella Actuator, headlight levelling (6NM010553-601)
- 2x Hella Bulb (8GP003594-121)
- 1x Hella Bulb (8GD008893-002)
Important compatibility info
| Placement on Vehicle | Left |
| Additional Information 2 | with bulbs, with motor for headlamp levelling |
| Voltage | 12 V |
| Vehicle Equipment | for vehicles without xenon light |
| Paired article numbers | 1LL 011 165-741 |
| Bulb Type | PY21W, W21W, HIR2 |
| Light Function | with position light, with low beam, with daytime running light, with indicator, with high beam |
| Left-hand / Right-hand Traffic | for left-hand traffic |
| Light Design | Halogen, DE |
| Number of light functions | 5 |
| Registration Type | ECE approved |
| Code | AVN |
| Country Version | Europe |
| Type | Headlight |
| Function | Headlight |
Additional Information
Brief Information
*** Original spare part
- 1x Hella Bulb, direction indicator (8GA006841-121)
- 1x Hella Bulb, spotlight (8GH009319-001)
- 1x Hella Actuator, headlight levelling (6NM010553-601)
- 2x Hella Bulb (8GP003594-121)
- 1x Hella Bulb (8GD008893-002)
Important compatibility info
| Diameter | 240 mm |
| Additional Information 2 | with clutch release bearing, with release fork |
| Adjustment | with automatic adjustment |
| Type | Clutch Kit |
| Function | Clutch Kit |
| Extra Description | LuK SAC |
Additional Information
- 1x LuK Clutch Pressure Plate (124065610)
- 1x LuK Clutch Disc (324087010)
- 1x LuK Release Set, clutch control (514001810)
Important compatibility info
| Diameter | 240 mm |
| Additional Information 2 | with clutch release bearing, with release fork |
| Adjustment | with automatic adjustment |
| Type | Clutch Kit |
| Function | Clutch Kit |
| Extra Description | LuK SAC |
Additional Information
- 1x LuK Clutch Pressure Plate (124065610)
- 1x LuK Clutch Disc (324087010)
- 1x LuK Release Set, clutch control (514001810)
Important compatibility info
| Net weight | 0.548 kg |
| Function | Nozzle and Holder Assembly |
| Manufacturer Restriction | Siemens |
| Type | Nozzle and Holder Assembly |
Important compatibility info
| Net weight | 0.548 kg |
| Function | Nozzle and Holder Assembly |
| Manufacturer Restriction | Siemens |
| Type | Nozzle and Holder Assembly |
Important compatibility info
| Extra Description | LuK RepSet DMF |
| Function | Clutch Kit |
| Additional Information | with central slave cylinder |
| Additional Information 2 | with flywheel, with screw set |
| Number of mounting bores | 8 |
| Type | Clutch Kit |
Additional Information
- 1x LuK Screw Set, flywheel (411012410)
- 1x LuK Flywheel (415032910)
- 1x LuK Clutch Kit (622313533)
Important compatibility info
| Extra Description | LuK RepSet DMF |
| Function | Clutch Kit |
| Additional Information | with central slave cylinder |
| Additional Information 2 | with flywheel, with screw set |
| Number of mounting bores | 8 |
| Type | Clutch Kit |
Additional Information
- 1x LuK Screw Set, flywheel (411012410)
- 1x LuK Flywheel (415032910)
- 1x LuK Clutch Kit (622313533)
Important compatibility info
| Type | Injector |
| Function | Injector |
| for OE number | 23670-29116 |
| Quality | OE NEW Supply |
| Fuel Type | Diesel |
| Injection System | Common Rail |
| Manufacturer Restriction | DENSO |
| Gross Weight | 0.8 kg |
Important compatibility info
| Type | Injector |
| Function | Injector |
| for OE number | 23670-29116 |
| Quality | OE NEW Supply |
| Fuel Type | Diesel |
| Injection System | Common Rail |
| Manufacturer Restriction | DENSO |
| Gross Weight | 0.8 kg |
Important compatibility info
| To be used with part number(s) | FK90992 |
| Product met | Euro 2 |
| Type | Catalytic Converter |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Extra Description | Approved |
| Includes fitting kit | FK90992B |
| Inspection Tag | E9-103R |
| Material | Ceramic |
Important compatibility info
| To be used with part number(s) | FK90992 |
| Product met | Euro 2 |
| Type | Catalytic Converter |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Extra Description | Approved |
| Includes fitting kit | FK90992B |
| Inspection Tag | E9-103R |
| Material | Ceramic |
Important compatibility info
| Type | Water pump, traction battery |
| Function | Water pump, traction battery |
| Voltage | 12 V |
| Operating Mode | Electric |
| for OE number | 31338384 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Water pump, traction battery |
| Function | Water pump, traction battery |
| Voltage | 12 V |
| Operating Mode | Electric |
| for OE number | 31338384 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External diameter, clutch pressure plate | 228 mm |
| Additional Information | with dual-mass flywheel |
| Extra Description | FULLPACK DMF with High Efficiency Clutch |
| Function | Clutch Kit |
| Type | Clutch Kit |
| Number of mounting bores | 6 |
| Weight | 14.85 kg |
| Number of Teeth | 28 |
| Additional Information 2 | with screw set, with lock screw set, with clutch release bearing |
| Tightening Torque | 60 Nm |
| Tightening angle | 50 ° |
Additional Information
Technical Information
Interchangeability with LuK or Sachs version if replacement of the complete kit with FullPACK DMF
- 1x Valeo Clutch Kit (838258)
Important compatibility info
| External diameter, clutch pressure plate | 228 mm |
| Additional Information | with dual-mass flywheel |
| Extra Description | FULLPACK DMF with High Efficiency Clutch |
| Function | Clutch Kit |
| Type | Clutch Kit |
| Number of mounting bores | 6 |
| Weight | 14.85 kg |
| Number of Teeth | 28 |
| Additional Information 2 | with screw set, with lock screw set, with clutch release bearing |
| Tightening Torque | 60 Nm |
| Tightening angle | 50 ° |
Additional Information
Technical Information
Interchangeability with LuK or Sachs version if replacement of the complete kit with FullPACK DMF
- 1x Valeo Clutch Kit (838258)
Important compatibility info
| Includes fitting kit | FK92118B |
| Product met | Euro 6 |
| To be used with part number(s) | FK92118 |
| Type | Catalytic Converter |
| Extra Description | Approved |
| Function | Catalytic Converter |
| Guarantee | 2 years guarantee |
| Placement on Vehicle | Front |
| Inspection Tag | E9-103R |
| Material | Ceramic |
Important compatibility info
| Includes fitting kit | FK92118B |
| Product met | Euro 6 |
| To be used with part number(s) | FK92118 |
| Type | Catalytic Converter |
| Extra Description | Approved |
| Function | Catalytic Converter |
| Guarantee | 2 years guarantee |
| Placement on Vehicle | Front |
| Inspection Tag | E9-103R |
| Material | Ceramic |
Important compatibility info
| Function | Catalytic Converter |
| Guarantee | 2 years guarantee |
| Inspection Tag | E57-103R |
| Product met | Euro 6 |
| Extra Description | Approved |
| Type | Catalytic Converter |
| Placement on Vehicle | Front |
| To be used with part number(s) | FK92478 |
| Material | Ceramic |
Important compatibility info
| Function | Catalytic Converter |
| Guarantee | 2 years guarantee |
| Inspection Tag | E57-103R |
| Product met | Euro 6 |
| Extra Description | Approved |
| Type | Catalytic Converter |
| Placement on Vehicle | Front |
| To be used with part number(s) | FK92478 |
| Material | Ceramic |
Important compatibility info
| Transmission Type | Manual Transmission |
| Function | Flywheel |
| Number of mounting bores | 6 |
| Additional Information 2 | with screw set |
| Extra Description | LuK DMF |
| Type | Flywheel |
Important compatibility info
| Transmission Type | Manual Transmission |
| Function | Flywheel |
| Number of mounting bores | 6 |
| Additional Information 2 | with screw set |
| Extra Description | LuK DMF |
| Type | Flywheel |
Important compatibility info
| Diameter | 500 mm |
| Operating Mode | Mechanical |
| Rotation Direction | Anticlockwise rotation |
| Packaging height | 78.00 cm |
| Packaging length | 77.0 cm |
| Packaging width | 20.00 cm |
| Number of Fan Blades | 9 |
| Type | Fan, engine cooling |
| Function | Fan, engine cooling |
| Extra Description | BEHR *** PREMIUM LINE *** |
| Net Weight | 4208 g |
| Manufacturer | MAHLE |
Additional Information
General Information
PREMIUM LINE - OE Quality for customers expecting the optimum
Important compatibility info
| Diameter | 500 mm |
| Operating Mode | Mechanical |
| Rotation Direction | Anticlockwise rotation |
| Packaging height | 78.00 cm |
| Packaging length | 77.0 cm |
| Packaging width | 20.00 cm |
| Number of Fan Blades | 9 |
| Type | Fan, engine cooling |
| Function | Fan, engine cooling |
| Extra Description | BEHR *** PREMIUM LINE *** |
| Net Weight | 4208 g |
| Manufacturer | MAHLE |
Additional Information
General Information
PREMIUM LINE - OE Quality for customers expecting the optimum
Important compatibility info
| for OE number | 74 21 738 118 |
| Type | Dosing Module, urea injection |
| Function | Dosing Module, urea injection |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | 74 21 738 118 |
| Type | Dosing Module, urea injection |
| Function | Dosing Module, urea injection |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with gears |
| Chain Type | Simplex |
| Number of Chain Links | 82. 90 |
| Type | Timing Chain Kit |
| Valve control | for engines with variable valve timing |
| Function | Timing Chain Kit |
Important compatibility info
| Additional Information | with gears |
| Chain Type | Simplex |
| Number of Chain Links | 82. 90 |
| Type | Timing Chain Kit |
| Valve control | for engines with variable valve timing |
| Function | Timing Chain Kit |
Important compatibility info
| for OE number | 24321-04005 S2 |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 122 |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| Extra Description | Standard Medium Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Blue Print Timing Chain (ADBP750014)
- 1x Blue Print Tensioner, timing chain (ADBP760120)
- 1x Blue Print Guide, timing chain (ADBP760121)
- 1x Blue Print Guide, timing chain (ADBP760122)
- 1x Blue Print Camshaft Adjuster (ADBP740069)
- 1x Blue Print Camshaft Adjuster (ADBP740058)
- 1x Blue Print Shaft Seal, crankshaft (ADG06129)
Important compatibility info
| for OE number | 24321-04005 S2 |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 122 |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| Extra Description | Standard Medium Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Blue Print Timing Chain (ADBP750014)
- 1x Blue Print Tensioner, timing chain (ADBP760120)
- 1x Blue Print Guide, timing chain (ADBP760121)
- 1x Blue Print Guide, timing chain (ADBP760122)
- 1x Blue Print Camshaft Adjuster (ADBP740069)
- 1x Blue Print Camshaft Adjuster (ADBP740058)
- 1x Blue Print Shaft Seal, crankshaft (ADG06129)
Important compatibility info
| Function | Compressor, air conditioning |
| for OE number | 9675657880 |
| Quality | OE |
| Type | Compressor, air conditioning |
| Mounting Type | Bolted |
| Refrigerant | R 1234yf |
| Compressor ID | 5SEL12C |
| Compressor Oil | ND-12 |
| Manufacturer Restriction | CITROEN-PEUGEOT, DENSO |
| Number of grooves | 6 |
| Gross Weight | 5555 g |
| Number of Ribs | 6 |
| Weight | 4745 g |
| Belt Pulley Diameter | 119 mm |
| Oil Fill Quantity | 110 ml |
Important compatibility info
| Function | Compressor, air conditioning |
| for OE number | 9675657880 |
| Quality | OE |
| Type | Compressor, air conditioning |
| Mounting Type | Bolted |
| Refrigerant | R 1234yf |
| Compressor ID | 5SEL12C |
| Compressor Oil | ND-12 |
| Manufacturer Restriction | CITROEN-PEUGEOT, DENSO |
| Number of grooves | 6 |
| Gross Weight | 5555 g |
| Number of Ribs | 6 |
| Weight | 4745 g |
| Belt Pulley Diameter | 119 mm |
| Oil Fill Quantity | 110 ml |
Important compatibility info
| for OE number | 88310-05140; 88310-1 |
| Compressor ID | 6SEU14C |
| Belt Pulley Diameter | 120 mm |
| Refrigerant | R 134a |
| Compressor Oil | ND-8 |
| Mounting Type | Bolted |
| Number of grooves | 6 |
| Type | Compressor, air conditioning |
| Quality | OE |
| Extra Info | DL-Pulley |
| Weight | 6083 g |
| Function | Compressor, air conditioning |
| Manufacturer Restriction | DENSO, TOYOTA |
| Number of Ribs | 6 |
| Oil Fill Quantity | 90 ml |
| Gross Weight | 6893 g |
Important compatibility info
| for OE number | 88310-05140; 88310-1 |
| Compressor ID | 6SEU14C |
| Belt Pulley Diameter | 120 mm |
| Refrigerant | R 134a |
| Compressor Oil | ND-8 |
| Mounting Type | Bolted |
| Number of grooves | 6 |
| Type | Compressor, air conditioning |
| Quality | OE |
| Extra Info | DL-Pulley |
| Weight | 6083 g |
| Function | Compressor, air conditioning |
| Manufacturer Restriction | DENSO, TOYOTA |
| Number of Ribs | 6 |
| Oil Fill Quantity | 90 ml |
| Gross Weight | 6893 g |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

























