Important compatibility info
| Housing Diameter | 38 mm |
| Length | 634 mm |
| Placement on Vehicle | both sides |
| Extra Description | febi Plus |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
| Stroke | 145 mm |
| Operating Mode | Electric |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Replaced by | 2294002482 |
| Extra Description | Dual-mass flywheel |
| Type | Flywheel |
| Function | Flywheel |
| Additional Information | with flywheel screws |
Additional Information
- 1x Sachs Screw Set, flywheel (1874000032)
Important compatibility info
| Replaced by | 2294002482 |
| Extra Description | Dual-mass flywheel |
| Type | Flywheel |
| Function | Flywheel |
| Additional Information | with flywheel screws |
Additional Information
- 1x Sachs Screw Set, flywheel (1874000032)
Important compatibility info
| Compressor Oil | ND-8 |
| Additional Information 2 | with magnetic clutch |
| Type | Compressor, air conditioning |
| Mounting Type | Bolted |
| Gross Weight | 6740 g |
| Weight | 5930 g |
| Voltage | 12 V |
| Number of Ribs | 6 |
| Belt Pulley Diameter | 125 mm |
| Refrigerant | R 134a |
| Compressor ID | 6SBL14C |
| Quality | OE |
| Oil Fill Quantity | 110 ml |
| Manufacturer Restriction | DENSO, RENAULT |
| Function | Compressor, air conditioning |
| Inlet Diameter | 21.3 mm |
| Outlet Diameter | 15.5 mm |
| Number of grooves | 6 |
| Extra Info | DL-Pulley |
| for OE number | 926008209R |
Important compatibility info
| Compressor Oil | ND-8 |
| Additional Information 2 | with magnetic clutch |
| Type | Compressor, air conditioning |
| Mounting Type | Bolted |
| Gross Weight | 6740 g |
| Weight | 5930 g |
| Voltage | 12 V |
| Number of Ribs | 6 |
| Belt Pulley Diameter | 125 mm |
| Refrigerant | R 134a |
| Compressor ID | 6SBL14C |
| Quality | OE |
| Oil Fill Quantity | 110 ml |
| Manufacturer Restriction | DENSO, RENAULT |
| Function | Compressor, air conditioning |
| Inlet Diameter | 21.3 mm |
| Outlet Diameter | 15.5 mm |
| Number of grooves | 6 |
| Extra Info | DL-Pulley |
| for OE number | 926008209R |
Important compatibility info
| Outer diameter | 240 mm |
| Function | Flywheel |
| Additional Information | with flywheel screws |
| Type | Flywheel |
| Extra Description | Dual-mass flywheel |
Additional Information
- 1x Sachs Bolt Kit, clutch (1874000089)
Important compatibility info
| Outer diameter | 240 mm |
| Function | Flywheel |
| Additional Information | with flywheel screws |
| Type | Flywheel |
| Extra Description | Dual-mass flywheel |
Additional Information
- 1x Sachs Bolt Kit, clutch (1874000089)
Important compatibility info
Important compatibility info
| Inspection Tag | E9-103R |
| Includes fitting kit | FK11154B |
| Product met | Euro 4 |
| Labels & Certifications | Euro 4 |
| Material | Silicon carbide |
| Extra Description | Approved |
| Function | Soot/Particulate Filter, exhaust system |
| Guarantee | 3 years guarantee |
| Type | Soot/Particulate Filter, exhaust system |
| To be used with part number(s) | FK11154 |
Important compatibility info
| Inspection Tag | E9-103R |
| Includes fitting kit | FK11154B |
| Product met | Euro 4 |
| Labels & Certifications | Euro 4 |
| Material | Silicon carbide |
| Extra Description | Approved |
| Function | Soot/Particulate Filter, exhaust system |
| Guarantee | 3 years guarantee |
| Type | Soot/Particulate Filter, exhaust system |
| To be used with part number(s) | FK11154 |
Important compatibility info
| Type | Cooler, exhaust gas recirculation |
| Function | Cooler, exhaust gas recirculation |
| Extra Description | Lucas Premium Blade |
| Operating Mode | Electric |
| Weight | 4.469 kg |
| Cooling Type | Water-cooled |
| Connector Shape | rectangular |
| Additional Information | without gasket/seal |
| Material | Aluminium |
| Number of Poles | 5 -pin connector |
| Net weight | 4.22 kg |
Important compatibility info
| Type | Cooler, exhaust gas recirculation |
| Function | Cooler, exhaust gas recirculation |
| Extra Description | Lucas Premium Blade |
| Operating Mode | Electric |
| Weight | 4.469 kg |
| Cooling Type | Water-cooled |
| Connector Shape | rectangular |
| Additional Information | without gasket/seal |
| Material | Aluminium |
| Number of Poles | 5 -pin connector |
| Net weight | 4.22 kg |
Important compatibility info
| To be used with part number(s) | FK91719 |
| Includes fitting kit | FK91719B |
| Extra Description | Approved |
| Function | Catalytic Converter |
| Guarantee | 2 years guarantee |
| Type | Catalytic Converter |
| Inspection Tag | E9-103R |
| Placement on Vehicle | Front |
| Product met | Euro 6 |
| Material | Ceramic |
Important compatibility info
| To be used with part number(s) | FK91719 |
| Includes fitting kit | FK91719B |
| Extra Description | Approved |
| Function | Catalytic Converter |
| Guarantee | 2 years guarantee |
| Type | Catalytic Converter |
| Inspection Tag | E9-103R |
| Placement on Vehicle | Front |
| Product met | Euro 6 |
| Material | Ceramic |
Important compatibility info
| Charge Type | Exhaust Turbocharger |
| Type | Charger, charging (supercharged/turbocharged) |
| Manufacturer Restriction | Garrett |
| Function | Charger, charging (supercharged/turbocharged) |
| Extra Description | TurboFit |
Important compatibility info
| Battery Capacity 10h (Ah) | 220 Ah |
| Height | 226 mm |
| Terminal Layout | One terminal Front, One Terminal Back on Diagonal |
| Terminal Type | Female Thread |
| Battery Capacity 5h (Ah) | 180 Ah |
| Type | AGM |
| Width | 174 mm |
| Voltage | 6 V |
| Length | 306 mm |
| Ampere-Hours | 242 A |
| Warranty | 1 year warranty |
Important compatibility info
| Battery Capacity 10h (Ah) | 220 Ah |
| Height | 226 mm |
| Terminal Layout | One terminal Front, One Terminal Back on Diagonal |
| Terminal Type | Female Thread |
| Battery Capacity 5h (Ah) | 180 Ah |
| Type | AGM |
| Width | 174 mm |
| Voltage | 6 V |
| Length | 306 mm |
| Ampere-Hours | 242 A |
| Warranty | 1 year warranty |
Important compatibility info
| Additional Information | with pilot bearing |
| Number of mounting bores | 8 |
| for flywheel depth | 11.9 mm |
| Function | Flywheel |
| Extra Description | LuK DMF |
| Type | Flywheel |
Important compatibility info
| Additional Information | with pilot bearing |
| Number of mounting bores | 8 |
| for flywheel depth | 11.9 mm |
| Function | Flywheel |
| Extra Description | LuK DMF |
| Type | Flywheel |
Important compatibility info
| Rated Power | 1.8 kW |
| Number of Teeth | 15 |
| Voltage | 12 V |
| Function | Starter |
| Type | Starter |
| Manufacturer Restriction | Valeo |
Important compatibility info
| Rated Power | 1.8 kW |
| Number of Teeth | 15 |
| Voltage | 12 V |
| Function | Starter |
| Type | Starter |
| Manufacturer Restriction | Valeo |
Important compatibility info
| Additional Information | with gears |
| Chain Type | Silent Chain |
| Number of Chain Links | 162. 66 |
| Type | Timing Chain Kit |
| Valve control | for engines with variable valve timing |
| Function | Timing Chain Kit |
Important compatibility info
| Additional Information | with gears |
| Chain Type | Silent Chain |
| Number of Chain Links | 162. 66 |
| Type | Timing Chain Kit |
| Valve control | for engines with variable valve timing |
| Function | Timing Chain Kit |
Important compatibility info
| Gross Weight | 5710 g |
| Quality | OE |
| Compressor ID | 7SEU17C |
| Height | 138 mm |
| for OE number | A0022305311 |
| Weight | 4900 g |
| Length | 192 mm |
| Refrigerant | R 134a |
| Number of Ribs | 8 |
| Belt Pulley Diameter | 100 mm |
| Manufacturer Restriction | DENSO, MERCEDES-BENZ |
| Function | Compressor, air conditioning |
| Oil Fill Quantity | 110 ml |
| Type | Compressor, air conditioning |
| Compressor Oil | ND-8 |
| Number of grooves | 8 |
| Mounting Type | Bolted |
| Inlet Diameter | 28.4 mm |
| Outlet Diameter | 13 mm |
Important compatibility info
| Gross Weight | 5710 g |
| Quality | OE |
| Compressor ID | 7SEU17C |
| Height | 138 mm |
| for OE number | A0022305311 |
| Weight | 4900 g |
| Length | 192 mm |
| Refrigerant | R 134a |
| Number of Ribs | 8 |
| Belt Pulley Diameter | 100 mm |
| Manufacturer Restriction | DENSO, MERCEDES-BENZ |
| Function | Compressor, air conditioning |
| Oil Fill Quantity | 110 ml |
| Type | Compressor, air conditioning |
| Compressor Oil | ND-8 |
| Number of grooves | 8 |
| Mounting Type | Bolted |
| Inlet Diameter | 28.4 mm |
| Outlet Diameter | 13 mm |
Important compatibility info
| Width | 56 mm |
| Parameter | 6 |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
| Inner diameter | 60 mm |
| Outer diameter | 157 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 56 mm |
| Parameter | 6 |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
| Inner diameter | 60 mm |
| Outer diameter | 157 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 158 mm |
| Bearing Type | Tapered Roller Bearing |
| Bolt Hole Circle Diameter | 335 mm |
| Placement on Vehicle | Rear Axle |
| Function | Wheel Hub |
| Outer diameter | 376.5 mm |
| Type | Wheel Hub |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
| Inner diameter | 82 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 158 mm |
| Bearing Type | Tapered Roller Bearing |
| Bolt Hole Circle Diameter | 335 mm |
| Placement on Vehicle | Rear Axle |
| Function | Wheel Hub |
| Outer diameter | 376.5 mm |
| Type | Wheel Hub |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
| Inner diameter | 82 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left Rear |
| Length | 667 mm |
| Operating Mode | Electric |
| Housing Diameter | 35 mm |
| Stroke | 182 mm |
| Type | Gas Spring, boot/cargo area |
| Function | Gas Spring, boot/cargo area |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left Rear |
| Length | 667 mm |
| Operating Mode | Electric |
| Housing Diameter | 35 mm |
| Stroke | 182 mm |
| Type | Gas Spring, boot/cargo area |
| Function | Gas Spring, boot/cargo area |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | 3-1 Kit |
| Additional Information 2 | with bearing |
| Number of Teeth | 24 |
| Function | Clutch Kit |
| Hub Profile | 25,6 |
| Friction Lining Outer Diameter | 250 mm |
| Type | Clutch Kit |
Important compatibility info
| Extra Description | 3-1 Kit |
| Additional Information 2 | with bearing |
| Number of Teeth | 24 |
| Function | Clutch Kit |
| Hub Profile | 25,6 |
| Friction Lining Outer Diameter | 250 mm |
| Type | Clutch Kit |
Important compatibility info
| Function | Nozzle and Holder Assembly |
| Manufacturer Restriction | Bosch |
| Type | Nozzle and Holder Assembly |
| Housing Colour | Black |
| Net weight | 0.338 kg |
| Number of Inlets / Outlets | 3 |
Important compatibility info
| Function | Nozzle and Holder Assembly |
| Manufacturer Restriction | Bosch |
| Type | Nozzle and Holder Assembly |
| Housing Colour | Black |
| Net weight | 0.338 kg |
| Number of Inlets / Outlets | 3 |
Important compatibility info
| Placement on Vehicle | Front |
| Material | Ceramic |
| Inspection Tag | E9-103R |
| Type | Catalytic Converter |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Extra Description | Approved |
| Product met | Euro 5 |
| To be used with part number(s) | FK80515, PP80515A |
Important compatibility info
| Placement on Vehicle | Front |
| Material | Ceramic |
| Inspection Tag | E9-103R |
| Type | Catalytic Converter |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Extra Description | Approved |
| Product met | Euro 5 |
| To be used with part number(s) | FK80515, PP80515A |
Important compatibility info
| Material | Cordierite |
| Inspection Tag | E24-103R |
| Type | Soot/Particulate Filter, exhaust system |
| Guarantee | 2 years guarantee |
| Function | Soot/Particulate Filter, exhaust system |
| Extra Description | Approved |
| Labels & Certifications | Up to Euro 5 |
| Includes fitting kit | FK11156B |
| Product met | Euro 5 |
| To be used with part number(s) | FK11156 |
Important compatibility info
| Material | Cordierite |
| Inspection Tag | E24-103R |
| Type | Soot/Particulate Filter, exhaust system |
| Guarantee | 2 years guarantee |
| Function | Soot/Particulate Filter, exhaust system |
| Extra Description | Approved |
| Labels & Certifications | Up to Euro 5 |
| Includes fitting kit | FK11156B |
| Product met | Euro 5 |
| To be used with part number(s) | FK11156 |
Important compatibility info
| To be used with part number(s) | FK11043 |
| Inspection Tag | E9-103R |
| Function | Soot/Particulate Filter, exhaust system |
| Guarantee | 3 years guarantee |
| Material | Silicon carbide |
| Extra Description | Approved |
| Type | Soot/Particulate Filter, exhaust system |
| Product met | Euro 4 |
| Labels & Certifications | Euro 4 |
Important compatibility info
| To be used with part number(s) | FK11043 |
| Inspection Tag | E9-103R |
| Function | Soot/Particulate Filter, exhaust system |
| Guarantee | 3 years guarantee |
| Material | Silicon carbide |
| Extra Description | Approved |
| Type | Soot/Particulate Filter, exhaust system |
| Product met | Euro 4 |
| Labels & Certifications | Euro 4 |
Important compatibility info
| Weight | 28500 |
| Length | 353 mm |
| Height | 191 mm |
| Width | 175 mm |
| Voltage | 12 V |
| Ampere-Hours | 94 A |
| Terminal Type | Standard |
| Type | AGM |
| Cold Cranking Amperage (CCA) | 950 A |
| Terminal Layout | Positive Front Right |
| Battery Type Code | 49-950 (ODP-AGM49) |
| Battery Capacity 10h (Ah) | 85 Ah |
| Marine Cranking Amperage (MCA) | 1150 A |
| PHCA (5 sec) | 1700 A |
| Warranty | 2 year warranty |
Important compatibility info
| Weight | 5780 g |
| Length | 197.7 mm |
| for OE number | 64509174805 |
| Oil Fill Quantity | 180 ml |
| Inlet Diameter | 28.3 mm |
| Outlet Diameter | 15.3 mm |
| Quality | OE |
| Compressor ID | 7SEU17C |
| Refrigerant | R 134a |
| Type | Compressor, air conditioning |
| Height | 138 mm |
| Compressor Oil | ND-8 |
| Number of Ribs | 4 |
| Number of grooves | 4 |
| Belt Pulley Diameter | 110 mm |
| Mounting Type | Bolted |
| Manufacturer Restriction | BMW, DENSO |
| Function | Compressor, air conditioning |
| Gross Weight | 6590 g |
Important compatibility info
| Weight | 5780 g |
| Length | 197.7 mm |
| for OE number | 64509174805 |
| Oil Fill Quantity | 180 ml |
| Inlet Diameter | 28.3 mm |
| Outlet Diameter | 15.3 mm |
| Quality | OE |
| Compressor ID | 7SEU17C |
| Refrigerant | R 134a |
| Type | Compressor, air conditioning |
| Height | 138 mm |
| Compressor Oil | ND-8 |
| Number of Ribs | 4 |
| Number of grooves | 4 |
| Belt Pulley Diameter | 110 mm |
| Mounting Type | Bolted |
| Manufacturer Restriction | BMW, DENSO |
| Function | Compressor, air conditioning |
| Gross Weight | 6590 g |
Important compatibility info
| for OE number | 2 021 086 |
| Operating Mode | Electric |
| Valve type | Solenoid Valve |
| Type | EGR valve, exhaust control |
| Function | EGR valve, exhaust control |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | 2 021 086 |
| Operating Mode | Electric |
| Valve type | Solenoid Valve |
| Type | EGR valve, exhaust control |
| Function | EGR valve, exhaust control |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rotation Direction | Anticlockwise rotation |
| Number of Connectors / Ports | 4 |
| Type | Fuel Pump / Hydraulic Pump, steering |
| Function | Fuel Pump / Hydraulic Pump, steering |
| Extra Description | febi Plus |
| Internal Thread Size | M16 x 1,5, M18 x 1,5, M26 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rotation Direction | Anticlockwise rotation |
| Number of Connectors / Ports | 4 |
| Type | Fuel Pump / Hydraulic Pump, steering |
| Function | Fuel Pump / Hydraulic Pump, steering |
| Extra Description | febi Plus |
| Internal Thread Size | M16 x 1,5, M18 x 1,5, M26 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Catalytic Converter |
| Function | Catalytic Converter |
Additional Information
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

























