Engine Oils

• High thermal and oxidation stability resists oil breakdown
• Strong oil film in combination with specialized additives provide high resistance against extreme pressure and high operating temperatures
• Enhanced anti-foaming formulation ensures superior protection at high engine rpm
• VR1 Racing is formulated for ultimate performance under extreme operating conditions Contains special additives that ensure optimal power output and maximum wear resistance for both turbocharged and non turbo charged petrol engines
• Maximum race-level performance and protection

• Meets: ACEA A3/B4, API: SL
• Ford WSS-M2C-153E, GM 6094M

• Compatible with petrol particulate filters
• Ensures consistent lubricant performance over extended drain intervals
• Excellent fuel efficiency
• Low speed pre-ignition prevention

•  ACEA C5, API SP, SN PLUS, SN-RC, ILSAC GF-6A
• BMW LONGLIFE-17 FE+, LONGLIFE-14 FE+, MERCEDES BENZ MB 229.72, MB 229.71, OPEL / VAUXHALL OV0401547, JAGUAR LAND ROVER STJLR.03.5006, FORD WSS-M2C947-B1, FIAT 9.55535-GSX, CHRYSLER MS-12145
• ILSAC GF-6A
• BMW LONGLIFE-17 FE+, LONGLIFE-14 FE+, MERCEDES BENZ MB 229.72, MB 229.71, OPEL / VAUXHALL OV0401547, JAGUAR LAND ROVER STJLR.03.5006, FORD WSS-M2C947-B1, FIAT 9.55535-GSX, CHRYSLER MS-12145

• Low Speed pre-ignition protection incorporated
• Valvoline Hybrid C-Series engine oils can also be used in engines that require an ACEA: C3, API: SP and API: SN engine oil in the SAE 5W30 viscosity grade
• Enhanced oxidation stability to ensure engine durability in the most severe stop-start cycles
• Excellent water tolerance and separation capability to prevent sludge forming
• Enhanced soot control to prevent premature oil degradation
• Enhanced oxidation stability to ensure engine durability in the most adverse stop-start situations. Improved oil flow and fast response at low temperature to prevent wear during the most severe stop-start conditions
• Enhanced anti-wear additives to ensure a longer engine life and maintain vehicle efficiency
• Valvoline Hybrid C-series engine oils are formulated with specially selected additives and antioxidants to ensure an increased level of protection in terms of oxidation, corrosion and wear especially for the hybrid vehicle challenges when compared to conv

• Meets: ACEA: C5
• API: SN, SP

• Keeps engine extremely clean by minimizing deposits
• Special additives prevent the formation of sludge and harmful deposits inside the engine
• Specifically designed for use with emission control systems like DPF (Diesel Particulate Filter) and TWC (Three Way Catalyst). Low SAPS output makes the emission control system last longer
• SynPower engine oil is formulated with the highest quality base oils and latest additives to ensure ultimate protection and performance under all operating conditions. Designed to fulfil the latest standards of leading engine manufacturers
• OEM approved premium grade motor oil

• Approved: Jaguar Land Rover STJLR 03.5005 Meets: ACEA C1 and C2
• Recommended for in-warranty service fill where Ford WSSM2C934-B is required, Meets requirements of Land Rover, Jaguar, Mitsubishi *Check owner’s manual before use

• Compatible with petrol particulate filters
• Ensures consistent lubricant performance over extended drain intervals
• Excellent fuel efficiency
• Low speed pre-ignition prevention

• ACEA C5, API SP, SN PLUS, SN-RC, ILSAC GF-6A, BMW LONGLIFE-17 FE+, LONGLIFE-14 FE+, MERCEDES BENZ MB 229.72, MB 229.71, OPEL / VAUXHALL OV0401547, JAGUAR LAND ROVER STJLR.03.5006, FORD WSS-M2C947-B1, FIAT 9.55535-GSX, CHRYSLER MS-12145

Carlube Triple R 15W-40 R-Tec 36 is a trustworthy, reliable and robust engine oil that provides strong corrosion and wear protection to key components in an engine, maintaining a clean and high-performing engine for trouble-free driving.

Triple R 15W-40 R-Tec 36 is Suitable for gasoline engines providing excellent protection and preventing engine wear during startup. Recommended for light-duty service and moderate oil drains.
Triple R 15W-40 R-Tec 36 also provides good sludge control & excellent high-temperature deposit control and is a low-cost oil for basic API SL performance

• Provides ultimate protection against wear under all operating conditions
• Low viscosity and special additives result in maximum reduction of friction which results in a lower fuel consumption Demonstrates up to 0 7% fuel economy improvement in relation to higher viscosity reference fluids (SAE 5W-30 to WSS M2C913 D)
• Instant oil flow at low temperatures provides easy cold starts and optimal lubrication within seconds after ignition
• Keeps engine extremely clean by minimizing deposits Passed the Daimler biodiesel oxidation test (80% diesel and 20% bio diesel)
• Specifically designed for use with emission control systems like DPF (Diesel Particulate Filter) and TWC (Three Way Catalyst) systems Low SAPS output keeps the emission control system clean and in optimal conditions
• SynPower engine oil is formulated with the highest quality base oils and latest additives to ensure ultimate protection and performance under all operating conditions Designed to fulfill the latest standards of leading engine manufacturers
• OEM approved premium grade motor oil

• Approved: GM dexos1 Gen 2 D10834IE103 Meets: API: SN, ILSAC GF-5
• API Resource Conserving

• Exceptional low temperature performance
• Zero compromise in engine protection
• Ensures consistent lubricant performance over extended drain intervals
• Excellent fuel efficiency

• ACEA C5, API SN, JAGUAR LAND ROVER STJLR.51.5122, MERCEDES BENZ MB 229.71

• Keeps engine extremely clean by minimizing deposits. Exceeds the ACEA A3/B3 limits for piston cleanliness in the Volkswagen TDI engine test
• Special additives prevent the formation of sludge and harmful deposits inside the engine
• Formulated for excellent product stability. Long-lasting performance and suitable for long drain intervals
• SynPower engine oil is formulated with the highest quality base oils and latest additives to ensure ultimate protection and performance under all operating conditions. Designed to fulfil the latest standards of leading engine manufacturers
• OEM approved premium grade motor oil

• Approved: BMW LL-04, MB 229.51, Porsche A40, VW Standard 502.00/505.00/505.01, GM dexos2 GB2E0310103, Renault RN0700/0710 Meets: ACEA C3, API: SM, SN/CF
• Ford WSS-M2C917-A. Recommended for use where Fiat 9.55535.S2 is specified.