Proud to be a UK-based company
Contact usGeneric Lighting
Categories
Important compatibility info
| Temperature range to | +60 °C |
| Temperature range from | -40 °C |
| Weight | 720 g |
| Height | 167 mm |
| Additional Information | with bulb |
| Additional Information 2 | Electromagnetic Compatibility (EMC) |
| Voltage | 24 V |
| Bulb Type | H1 |
| Light Function | With rotating warning signal |
| Housing Colour | Black |
| Outer diameter 1 | 135 mm |
| Light Design | Halogen |
| Mounting Type | Flexible pipe sockets |
| Quantity | 1 |
| Lens Colour | yellow (amber) |
| Registration Type | SAE approved |
| Power Consumption | 70 W |
| Protection Type (IP Code) | IPX9K, IP5K4K |
| Type | Rotating Beacon |
| Diffusing Lens Material | PC (Polycarbonate) |
| Fulfils ECE norm | R10, R65 |
| Housing material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Function | Rotating Beacon |
| Extra Description | Rota Compact |
| Rotating beacon RPM [1/min] | 180 1/min |
| Replaced by | 2XD013979-011 |
| Light colour | yellow (amber) |
Additional Information
- 1x Hella Lens, rotating beacon (9EL864074-001)
- 1x Hella Timing Belt Kit (9XR855975-001)
- 1x Hella Bulb (8GH002089-251)
£47.56
Important compatibility info
| Placement on Vehicle | Rear, Left, Upper, Right |
| Length | 80 mm |
| Height | 42 mm |
| Width | 80 mm |
| Additional Information 2 | without bulbs |
| Voltage | 12 V. 24 V |
| Bulb Type | C5W |
| Light Function | with taillight |
| Housing Colour | Grey |
| Light Design | Halogen |
| Mounting Type | mounting |
| Quantity | 2 |
| Number of light functions | 1 |
| Lens Colour | Red |
| Plug Type | Blade Terminal |
| Type | Tail Light |
| Fulfils ECE norm | R7 |
| Function | Tail Light |
Additional Information
Brief Information
*** Original spare part
- 1x Hella Lamp Base (9FT088047-001)
- 1x Hella Lens, tail light (9EL135266-001)
£8.85
Important compatibility info
| Placement on Vehicle | Left, Right |
| Length | 30 mm |
| Height | 98 mm |
| Width | 98 mm |
| Voltage | 24 V |
| Bulb Type | LED |
| Light Function | with taillight (LED) |
| Housing Colour | Black |
| Light Design | LED |
| Mounting Type | Fitting |
| Quantity | 60 |
| Number of light functions | 1 |
| Lens Colour | Crystal clear |
| Registration Type | CCC approved |
| Fastening Type | 3-point attachment |
| Plug Type | open cable ends |
| Power Consumption | 1.8 W |
| Number of LEDs | 12 |
| LED Colour | Red |
| Type | Tail Light |
| Fulfils ECE norm | R7 |
| Function | Tail Light |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
£41.44
Important compatibility info
| Placement on Vehicle | Rear |
| Length | 30 mm |
| Height | 98 mm |
| Width | 98 mm |
| Voltage | 12 V |
| Bulb Type | LED |
| Light Function | with taillight (LED) |
| Housing Colour | Black |
| Light Design | LED |
| Mounting Type | Fitting |
| Quantity | 60 |
| Number of light functions | 1 |
| Lens Colour | Crystal clear |
| Fastening Type | 3-point attachment |
| Plug Type | open cable ends |
| Power Consumption | 1.8 W |
| Number of LEDs | 12 |
| LED Colour | Red |
| Type | Tail Light |
| Fulfils ECE norm | R7 |
| Function | Tail Light |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
£40.10
Important compatibility info
£75.40
Important compatibility info
| LED Colour | White |
| Function | Clearance Light |
| Additional Information | with bulb holder |
| Registration Type | ECE approved |
| Lens Colour | Crystal clear |
| Light Function | with marker lamp |
| Housing Colour | Black |
| Mounting Type | mounting |
| Placement on Vehicle | Left, Lateral Mounting |
| Type | Clearance Light |
| Number of light functions | 1 |
| Quantity | 1 |
Additional Information
Brief Information
*** Original spare part
£12.44
Important compatibility info
| Placement on Vehicle | Lateral Mounting |
| Additional Information | with bulb |
| Voltage | 12 V |
| Bulb Type | T4W |
| Light Function | with marker lamp |
| Light Design | Halogen |
| Mounting Type | mounting |
| Number of light functions | 1 |
| Lens Colour | Crystal clear, Red |
| Registration Type | ECE approved, ADR/GGVS approved |
| Type | Clearance Light |
| Function | Clearance Light |
Additional Information
- 1x Hella Bulb (8GP002067-121)
- 1x Hella Lens (9EL132215-001)
£9.33
Important compatibility info
| Length | 100 mm |
| DIN / ISO | 72 591 |
| Type | Base, worklight / Holder / Holder, rotating beacon |
| Function | Base, worklight / Holder / Holder, rotating beacon |
| Additional Information 2 | with top, with screw connection |
| Diameter | 24 mm |
| Number of Poles | 2 -pin connector |
£26.19
Important compatibility info
| Light Function | with position light |
| Number of light functions | 1 |
| Type | Position Light |
| Function | Position Light |
£41.42
Important compatibility info
| Placement on Vehicle | Left, Right |
| Light Function | with indicator, with stop light, with rear fog light, with reverse light, with reflector, with taillight |
| Number of light functions | 6 |
| Registration Type | ECE approved |
| Type | Lens, tail light assembly |
| Function | Lens, tail light assembly |
£31.32
