Hose & Pipe

• Mild steel zinc plated construction
• Pincers (both normal & side closing) are used to crimp the ears of the clamps and affect a proper seal
• Tamper proof nature of the fitting is also suitable for applications where there may be a risk of interference
• Absence of a screw mechanism allows 'O' clips to be used on extremely small hoses
• Also referred to as lemon clips, double ear clips and 2-ear clips
• Mainly used on air, fluid, gas and steam lines as well as being suitable for low pressure hydraulic applications.
• Widely used for maintenance and OEM applications

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Mild steel zinc protected
• Independently tested by the British Standards Institute (BSi) and carry the British Standard Kitemark™ BS 5315:1991
• The smooth inside profile of the band and rolled edges give protection for all types of hoses including soft hoses made from rubber or silicone
• The band is continuously threaded to enable extra flexibility when adjusting the clip to the correct size
• The original worm drive hose clip

The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time.

In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.

• 304 grade stainless steel
• Independently tested by the British Standards Institute (BSi) and carry the British Standard Kitemark™ BS 5315:1991
• The smooth inside profile of the band and rolled edges give protection for all types of hoses including soft hoses made from rubber or silicone
• The band is continuously threaded to enable extra flexibility when adjusting the clip to the correct size
• The original worm drive hose clip

This roll of fuel hose from Pearl Automotive is 3.2 x 7mm. It comes in a 5m roll made from braided polyester suitable for leaded, unleaded and diesel fuels.

Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.

• 5m roll with an outer braided covering
• Made from NBR/PVC with polyester outer suitable for leaded/unleaded and diesel engine non injection
• Fuel hose 3.2mm inside diameter

• DIN 73379 TYPE B

The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time.

In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.

• 304 grade stainless steel
• Independently tested by the British Standards Institute (BSi) and carry the British Standard Kitemark™ BS 5315:1991
• The smooth inside profile of the band and rolled edges give protection for all types of hoses including soft hoses made from rubber or silicone
• The band is continuously threaded to enable extra flexibility when adjusting the clip to the correct size
• The original worm drive hose clip

• DIN 3017
• Band Thickness 0.7mm
• No. 304 SS Marine Grade
• Stainless Steel

• SS Hoseclip 30-45mm

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Securing them in place is done using a Felxidriver. These screwdrivers have a7mm a/f socket especially designed to adjust and secure Jubilee clips with can be place in awkward places.

In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.

• Mild steel construction
• The socket is suitable to fit any 7mm across flat hexagonal headed screw
• Flexible shaft allows the adjustment of clips even in difficult to reach positions