Maintenance >

Hose & Pipe

Maintenance Sub-Categories

Cable Ties
Car Covers
Hose & Pipe
Ice Scrapers & Snow Shovels
Manuals
Nuts & Washers
O Rings
Paints
Rivets
Rubbing Compound
Rust Care
Self Tapper & Wood Screws
Signage
Snow Chains
Split Pins
Threaded Fasteners
Vehicle Trim Clips
View all
Sort by:
Price -/+
Brand:
Select Brand
invoice Page 14 of 30
Results 391 - 420 of 875

Jubilee NB1012 Junior Clips M/S 10-12mm Pack Of 50

Part number: NB1012
Title Junior Clips M/S 10-12mm - Pack of 50
Material Mild Steel
Pack Qty Pack of 50
Size 10-12mm

Additional Information

From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
  • Mini clips, also known as nut & bolt clips
  • Ideal for small bore hoses with relatively low pressures, where little clamping force is required
  • Used in applications such as securing fuel lines and heater hoses
  • 7mm A/F screw fastening
  • Recommended tightening torque - 1.5Nm, maximum tightening torque 2Nm
    • Jubilee NB1012 Junior Clips M/S 10-12mm Pack Of 50
    ONLY
    £22.23
    More info
    Quantity:

    Gates MFL1299 Moulded Fuel Hose / Pipe

    Part number: MFL1299
    Placement on Vehicle Fuel pump to filter
    Material Plastic
    Colour White-transparent
    Type Fuel Line
    Function Fuel Line
    Gates MFL1299 Moulded Fuel Hose / Pipe
    ONLY
    £22.18
    More info
    Quantity:

    Jubilee 1518MS O Clips M/S 15-18mm Pack Of 50

    Part number: 1518MS
    Title O Clips M/S 15-18mm - Pack of 50
    Material Mild Steel
    Pack Qty Pack of 50
    Size 15-18mm

    Additional Information

    From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
  • Widely used for maintenance and OEM applications
  • Mainly used on air, fluid, gas and steam lines as well as being suitable for low pressure hydraulic applications.
  • Also referred to as lemon clips, double ear clips and 2-ear clips
  • Absence of a screw mechanism allows 'O' clips to be used on extremely small hoses
  • Tamper proof nature of the fitting is also suitable for applications where there may be a risk of interference
  • Pincers (both normal & side closing) are used to crimp the ears of the clamps and affect a proper seal
  • Mild steel zinc plated construction
    • Jubilee 1518MS O Clips M/S 15-18mm Pack Of 50
    ONLY
    £22.14
    More info
    Quantity:

    Jubilee 9.5MSP Hose Clip M/S 9.5 210-242mm Pack Of 5

    Part number: 9.5MSP
    Title Hose Clips M/S 9.5 210-242mm - Box of 5
    Material Mild Steel
    Pack Qty Pack of 5
    Size 210-242mm

    Additional Information

    From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
  • The original worm drive hose clip
  • The band is continuously threaded to enable extra flexibility when adjusting the clip to the correct size
  • The smooth inside profile of the band and rolled edges give protection for all types of hoses including soft hoses made from rubber or silicone
  • Independently tested by the British Standards Institute (BSi) and carry the British Standard Kitemark™ BS 5315:1991
  • Mild steel zinc protected
    • Jubilee 9.5MSP Hose Clip M/S 9.5 210-242mm Pack Of 5
    ONLY
    £22.08
    More info
    Quantity:

    Febi 171008 Crank Case Breather Pipe Hose

    Part number: 171008
    Height 35 mm
    Width 90 mm
    Inner diameter 1 10 mm
    Inner diameter 2 23 mm
    Type Hose, crankcase ventilation
    Function Hose, crankcase ventilation
    Extra Description febi Plus
    Hose Length 310 mm

    Additional Information

    General Information

    These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

    Febi 171008 Crank Case Breather Pipe Hose
    ONLY
    £22.04
    More info
    Quantity:

    Gates 7037 Extra Service Curved Hose

    Part number: 7037
    Operating temperature to +100 °C
    Material EPDM (ethylene propylene diene Monomer (M-class) rubber)
    Operating temperature from -40 °C
    Hose length 0.6 m
    Working pressure 2.1 bar
    Function Hose
    Inner diameter 2 55 mm
    Inner diameter 1 55 mm
    Type Hose
    Gates 7037 Extra Service Curved Hose
    ONLY
    £22.01
    More info
    Quantity:

    Gates EMH454 Crank Case Breather Pipe Hose

    Part number: EMH454
    Function Hose, crankcase ventilation
    Colour Black
    Material Plastic
    Hose Length 137 mm
    Inner diameter 2 23 mm
    Inner diameter 1 23 mm
    Type Hose, crankcase ventilation
    Gates EMH454 Crank Case Breather Pipe Hose
    ONLY
    £22.01
    More info
    Quantity:

    Gates MFL1365 Moulded Fuel Hose / Pipe

    Part number: MFL1365
    Placement on Vehicle Fuel Pump
    Material Plastic
    Inner diameter 1 8 mm
    Colour Black
    Inner diameter 2 8 mm
    Type Fuel Line
    Hose Length 370 mm
    Function Fuel Line
    Gates MFL1365 Moulded Fuel Hose / Pipe
    ONLY
    £22.00
    More info
    Quantity:

    Gates MFL1256 Moulded Fuel Hose / Pipe

    Part number: MFL1256
    Material Plastic
    Colour Black
    Function Fuel Line
    Type Fuel Line
    Placement on Vehicle Fuel pump to filter
    Gates MFL1256 Moulded Fuel Hose / Pipe
    ONLY
    £21.96
    More info
    Quantity:

    Febi 46301 Crank Case Breather Pipe Hose

    Part number: 46301
    Material Plastic
    Colour Black
    Function Hose, crankcase ventilation
    Placement on Vehicle Centre
    Extra Description febi Plus
    Type Hose, crankcase ventilation

    Additional Information

    General Information

    These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

    Febi 46301 Crank Case Breather Pipe Hose
    ONLY
    £21.78
    More info
    Quantity:

    Gates MFL1359 Moulded Fuel Hose / Pipe

    Part number: MFL1359
    Function Fuel Line
    Hose Length 450 mm
    Colour Black
    Inner diameter 1 8 mm
    Inner diameter 2 8 mm
    Type Fuel Line
    Material Plastic
    Gates MFL1359 Moulded Fuel Hose / Pipe
    ONLY
    £21.77
    More info
    Quantity:

    Gates EMH127 Crank Case Breather Pipe Hose

    Part number: EMH127
    Material NBR (nitrile butadiene rubber)
    Colour Black
    Function Hose, crankcase ventilation
    Inner diameter 1 16 mm
    Hose Length 135 mm
    Inner diameter 2 16 mm
    Type Hose, crankcase ventilation
    Gates EMH127 Crank Case Breather Pipe Hose
    ONLY
    £21.63
    More info
    Quantity:

    Febi 170861 Crank Case Breather Pipe Hose

    Part number: 170861
    Width 95 mm
    Height 35 mm
    Inner diameter 18 mm
    Function Hose, crankcase ventilation
    Extra Description febi Plus
    Type Hose, crankcase ventilation
    Hose Length 280 mm
    Additional Information with quick coupling

    Additional Information

    General Information

    These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

    Febi 170861 Crank Case Breather Pipe Hose
    ONLY
    £21.58
    More info
    Quantity:

    Jubilee 00SS Hose Clip S/S 00 13-20mm Box Of 10

    Part number: 00SS
    Title Hose Clips S/S 00 13-20mm - Box of 10
    Material Stainless Steel
    Pack Qty Pack of 10
    Size 13-20mm

    Additional Information

    Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible.

    The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time.

    In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.

  • The original worm drive hose clip
  • The band is continuously threaded to enable extra flexibility when adjusting the clip to the correct size
  • The smooth inside profile of the band and rolled edges give protection for all types of hoses including soft hoses made from rubber or silicone
  • Independently tested by the British Standards Institute (BSi) and carry the British Standard Kitemark™ BS 5315:1991
  • 304 grade stainless steel
    • Jubilee 00SS Hose Clip S/S 00 13-20mm Box Of 10
    ONLY
    £21.58
    More info
    Quantity:

    Jubilee 4XMSP Hose Clip M/S 4x 85-100mm Pack Of 10

    Part number: 4XMSP
    Title Hose Clips M/S 4X 85-100mm - Box of 10
    Material Mild Steel
    Pack Qty Pack of 10
    Size 85-100mm

    Additional Information

    From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
  • The original worm drive hose clip
  • The band is continuously threaded to enable extra flexibility when adjusting the clip to the correct size
  • The smooth inside profile of the band and rolled edges give protection for all types of hoses including soft hoses made from rubber or silicone
  • Independently tested by the British Standards Institute (BSi) and carry the British Standard Kitemark™ BS 5315:1991
  • Mild steel zinc protected
    • Jubilee 4XMSP Hose Clip M/S 4x 85-100mm Pack Of 10
    ONLY
    £21.46
    More info
    Quantity:

    Gates EMH727 Crank Case Breather Pipe Hose

    Part number: EMH727
    Function Hose, crankcase ventilation
    Hose Length 270 mm
    Colour Black
    Inner diameter 1 23.5 mm
    Inner diameter 2 20 mm
    Type Hose, crankcase ventilation
    Placement on Vehicle Cylinder Head
    Material NBR (nitrile butadiene rubber)
    Gates EMH727 Crank Case Breather Pipe Hose
    ONLY
    £21.41
    More info
    Quantity:

    Jubilee FLX Flexidriver 7mm A/F Socket

    Part number: FLX
    Title 95mm Flexidriver with 7mm A/F Socket

    Additional Information

    Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings.

    Securing them in place is done using a Felxidriver. These screwdrivers have a7mm a/f socket especially designed to adjust and secure Jubilee clips with can be place in awkward places.

    In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.

    From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. Securing them in place is done using a Felxidriver. These screwdrivers have a7mm a/f socket especially designed to adjust and secure Jubilee clips with can be place in awkward places. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
  • Flexible shaft allows the adjustment of clips even in difficult to reach positions
  • The socket is suitable to fit any 7mm across flat hexagonal headed screw
  • Mild steel construction
    • Jubilee FLX Flexidriver 7mm A/F Socket
    ONLY
    £21.38
    More info
    Quantity:

    Gates MFL1255 Moulded Fuel Hose / Pipe

    Part number: MFL1255
    Please enter your vehicle information above to check this fits your vehicle!
    Hose Length 240 mm
    Inner diameter 1 8 mm
    Inner diameter 2 5 mm
    Function Fuel Line
    Type Fuel Line
    Material Plastic
    Colour Black
    Gates MFL1255 Moulded Fuel Hose / Pipe
    ONLY
    £21.17
    More info
    Quantity:

    Febi 1003000 Power Steering Pipe Hose

    Part number: 1003000
    Length 242 mm
    Height 71 mm
    Inner diameter 21 mm
    Type Hydraulic Hose, steering
    Function Hydraulic Hose, steering

    Additional Information

    General Information

    These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

    Febi 1003000 Power Steering Pipe Hose
    ONLY
    £20.92
    More info
    Quantity:

    Gates EMH376 Crank Case Breather Pipe Hose

    Part number: EMH376
    Function Hose, crankcase ventilation
    Material Plastic
    Inner diameter 1 18 mm
    Inner diameter 2 18 mm
    Hose Length 155 mm
    Type Hose, crankcase ventilation
    Gates EMH376 Crank Case Breather Pipe Hose
    ONLY
    £20.92
    More info
    Quantity:

    Gates EMH121 Crank Case Breather Pipe Hose

    Part number: EMH121
    Function Hose, crankcase ventilation
    Colour Black
    Material Plastic
    Inner diameter 1 6.5 mm
    Hose Length 430 mm
    Type Hose, crankcase ventilation
    Inner diameter 2 5 mm
    Gates EMH121 Crank Case Breather Pipe Hose
    ONLY
    £20.90
    More info
    Quantity:

    Gates EMH491 Crank Case Breather Pipe Hose

    Part number: EMH491
    Inner diameter 1 20 mm
    Material NBR (nitrile butadiene rubber)
    Colour Black
    Function Hose, crankcase ventilation
    Type Hose, crankcase ventilation
    Inner diameter 2 12.5 mm
    Hose Length 225 mm
    Gates EMH491 Crank Case Breather Pipe Hose
    ONLY
    £20.76
    More info
    Quantity:

    Febi 36680 Crank Case Breather Pipe Hose

    Part number: 36680
    Material Plastic
    Function Hose, crankcase ventilation
    for OE number 11 15 7 520 035
    Extra Description febi Plus
    Type Hose, crankcase ventilation
    Hose Length 380 mm

    Additional Information

    General Information

    These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

    Febi 36680 Crank Case Breather Pipe Hose
    ONLY
    £20.69
    More info
    Quantity:

    Gates EMH118 Crank Case Breather Pipe Hose

    Part number: EMH118
    Inner diameter 1 26 mm
    Inner diameter 2 19 mm
    Hose Length 220 mm
    Material NBR (nitrile butadiene rubber)
    Colour Black
    Function Hose, crankcase ventilation
    Type Hose, crankcase ventilation
    Gates EMH118 Crank Case Breather Pipe Hose
    ONLY
    £20.63
    More info
    Quantity:

    Gates EMH241 Crank Case Breather Pipe Hose

    Part number: EMH241
    Hose Length 420 mm
    Inner diameter 2 5.5 mm
    Inner diameter 1 5.5 mm
    Material Rubber
    Colour Black
    Type Hose, crankcase ventilation
    Function Hose, crankcase ventilation
    Gates EMH241 Crank Case Breather Pipe Hose
    ONLY
    £20.63
    More info
    Quantity:

    Gates EMH628 Crank Case Breather Pipe Hose

    Part number: EMH628
    Inner diameter 1 7 mm
    Material NBR (nitrile butadiene rubber)
    Colour Black
    Function Hose, crankcase ventilation
    Type Hose, crankcase ventilation
    Hose Length 240 mm
    Inner diameter 2 5 mm
    Gates EMH628 Crank Case Breather Pipe Hose
    ONLY
    £20.63
    More info
    Quantity:

    Febi 171282 Crank Case Breather Pipe Hose

    Part number: 171282
    Height 110 mm
    Width 170 mm
    Inner diameter 1 16 mm
    Inner diameter 2 16.3 mm
    Function Hose, crankcase ventilation
    Extra Description febi Plus
    Type Hose, crankcase ventilation
    for OE number 06F 103 235 A
    Additional Information 2 with quick couplers
    Hose Length 300 mm

    Additional Information

    General Information

    These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

    Febi 171282 Crank Case Breather Pipe Hose
    ONLY
    £20.62
    More info
    Quantity:

    Gates EMH328 Crank Case Breather Pipe Hose

    Part number: EMH328
    Please enter your vehicle information above to check this fits your vehicle!
    Function Hose, crankcase ventilation
    Material NBR (nitrile butadiene rubber)
    Inner diameter 2 15.5 mm
    Hose Length 280 mm
    Replaced by EMH350
    Inner diameter 1 15.5 mm
    Type Hose, crankcase ventilation
    Colour black
    Gates EMH328 Crank Case Breather Pipe Hose
    ONLY
    £20.49
    More info
    Quantity:

    Febi 170674 Crank Case Breather Pipe Hose

    Part number: 170674
    Height 35 mm
    Width 100 mm
    Inner diameter 19.3 mm
    Function Hose, crankcase ventilation
    Extra Description febi Plus
    Placement on Vehicle Front
    Type Hose, crankcase ventilation
    Hose Length 260 mm
    for OE number 06J 103 221
    Additional Information 2 with quick couplers

    Additional Information

    General Information

    These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

    Febi 170674 Crank Case Breather Pipe Hose
    ONLY
    £20.34
    More info
    Quantity:

    Workshop Warehouse TUB47 FUEL HOSE SAE 30 R6 7.9MM

    Part number: TUB47
    Internal Dia. 15 mm
    Length 5M
    Max. Pressure 20 bar
    Pack Qty Length 5 Metre Coil
    Pack Weight 0.9
    Temperature Range -20° to +80°C
    Weight 0.9kg

    Additional Information

    Fuel Hose SAE 30 R6 7.9mm (5/16"")
  • 20 bar working pressure
  • Environmental temp: -20° to +80°C
  • BS AU 108/2/L4/C4/R SAE 30 R6
  • Compatible with E10 fuel
  • Also for power steering low pressure side return
  • BS AU 108/2/L4/C4/R SAE 30 R6
    • Workshop Warehouse TUB47 FUEL HOSE SAE 30 R6 7.9MM
    ONLY
    £20.30
    More info
    Quantity:
    Page 14 of 30
    Hose & Pipe
    Your feedback more
    Trusted reviews more
    Secure payments more
    Simple returns more