Hose & Pipe

Hose Length 47 mm
Inner diameter 1 19.5 mm
Material NBR (nitrile butadiene rubber)
Colour Black
Function Hose, crankcase ventilation
Type Hose, crankcase ventilation
Inner diameter 2 22 mm
Gates EMH262 Crank Case Breather Pipe Hose
ONLY
£10.36
Quantity:
Please enter your vehicle information above to check this fits your vehicle!
Hose Length 160 mm
Material Plastic
Colour Black
Function Hose, crankcase ventilation
Inner diameter 2 23 mm
Inner diameter 1 23 mm
Type Hose, crankcase ventilation
Gates EMH444 Crank Case Breather Pipe Hose
ONLY
£10.31
Quantity:
Hose Length 187 mm
Inner diameter 1 20 mm
Material NBR (nitrile butadiene rubber)
Colour Black
Function Hose, crankcase ventilation
Inner diameter 2 14 mm
Type Hose, crankcase ventilation
Gates EMH583 Crank Case Breather Pipe Hose
ONLY
£10.30
Quantity:
Inner diameter 1 15 mm
Hose Length 189 mm
Inner diameter 2 15 mm
Material NBR (nitrile butadiene rubber)
Colour Black
Function Hose, crankcase ventilation
Type Hose, crankcase ventilation
Gates EMH363 Crank Case Breather Pipe Hose
ONLY
£10.20
Quantity:
Inner diameter 9 mm
Hose Length 210 mm
for OE number 112 018 01 82
Function Hose, crankcase ventilation
Extra Description febi Plus
Type Hose, crankcase ventilation

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 33850 Crank Case Breather Pipe Hose
ONLY
£10.17
Quantity:
Material Plastic
Function Hose, crankcase ventilation
Extra Description febi Plus
Type Hose, crankcase ventilation
Additional Information with quick coupling

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 37026 Crank Case Breather Pipe Hose
ONLY
£10.17
Quantity:
Hose Length 350 mm
Inner diameter 2 10 mm
Inner diameter 1 10 mm
Material Rubber
Colour Black
Type Hose, crankcase ventilation
Function Hose, crankcase ventilation
Gates EMH124 Crank Case Breather Pipe Hose
ONLY
£10.08
Quantity:
Title Heater Hose & Clips 10mm x 1m
Size 1m
Type Hose Clip

Additional Information

Over time hoses and pipes deteriorate. To avoid drips and leaks you may need to replace these from time to time to ensure that you vehicle is running effectively and efficiently. Pearl Automotive provide a wide range of replacement parts and accessories to cater for a wide range of circumstances.

This length of heater hose from Pearl Automotive is 3/8 inch hose. It comes in a 1m length made from MBR.CR rubber which is suitable for use with vehicle heater systems.

Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.

Over time hoses and pipes deteriorate. To avoid drips and leaks you may need to replace these from time to time to ensure that you vehicle is running effectively and efficiently. Pearl Automotive provide a wide range of replacement parts and accessories to cater for a wide range of circumstances. This length of heater hose from Pearl Automotive is 3/8 inch hose. It comes in a 1m length made from MBR.CR rubber which is suitable for use with vehicle heater systems. Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.
  • Suitable for automotive heating systems with a temperature range of -40 Deg C to + 110 Deg C
  • Black EPDM Resistant to Weather Ozone
  • Pearl PHH04C Heater Hose / Clips 10mm X 1m
    ONLY
    £10.07
    Quantity:
    Internal Dia. 45mm
    Title Flexible Air Duct Hose - 45mm - 0.5 Meter
    Length 0.5m

    Additional Information

  • Aluminium air duct hose
  • Flexible hose makes for easier routing
  • Heat resistant from -40 to +250 degrees celsius
  • Gates 7743-00545 Fd45x0.5 Duct Hose 45mmx0.5m
    ONLY
    £10.05
    Quantity:
    Inner diameter 2 13 mm
    Hose Length 200 mm
    Inner diameter 1 15 mm
    Material NBR (nitrile butadiene rubber)
    Colour Black
    Function Hose, crankcase ventilation
    Type Hose, crankcase ventilation
    Gates EMH497 Crank Case Breather Pipe Hose
    ONLY
    £10.00
    Quantity:
    Material AEM (Ethylene Acrylate Rubber)
    Inner diameter 1 21 mm
    Colour Black
    Inner diameter 2 21 mm
    Type Hose, crankcase ventilation
    Hose Length 470 mm
    Function Hose, crankcase ventilation
    Gates EMH384 Crank Case Breather Pipe Hose
    ONLY
    £9.97
    Quantity:
    Inner diameter 2 19.5 mm
    Hose Length 432 mm
    Inner diameter 1 19.5 mm
    Material NBR (nitrile butadiene rubber)
    Colour Black
    Function Hose, crankcase ventilation
    Type Hose, crankcase ventilation
    Gates EMH342 Crank Case Breather Pipe Hose
    ONLY
    £9.96
    Quantity:
    Inner diameter 1 25 mm
    Material NBR (nitrile butadiene rubber)
    Colour Black
    Function Hose, crankcase ventilation
    Inner diameter 2 19.5 mm
    Hose Length 135 mm
    Type Hose, crankcase ventilation
    Gates EMH600 Crank Case Breather Pipe Hose
    ONLY
    £9.93
    Quantity:
    Part number: BHC2008
    Type Fastening Clamp, charge air hose
    Function Fastening Clamp, charge air hose
    Diameter To 64 mm
    Diameter From 71 mm
    Quantity 5
    Borg & Beck BHC2008 HORSESHOE CLIP
    ONLY
    £9.91
    Quantity:
    Function Fastening Clamp, charge air hose
    Diameter To 64 mm
    Diameter From 71 mm
    Quantity 5
    Type Fastening Clamp, charge air hose
    First Line FHC2008 Horse Shoe Clip X5
    ONLY
    £9.91
    Quantity:
    Inner diameter 2 21 mm
    Inner diameter 1 21 mm
    Hose Length 330 mm
    Function Hose, crankcase ventilation
    Colour Black
    Type Hose, crankcase ventilation
    Material NBR (nitrile butadiene rubber)
    Gates EMH579 Crank Case Breather Pipe Hose
    ONLY
    £9.91
    Quantity:
    Manufacturer ACE
    Material Zinc Plated Mild Steel
    Pack Qty Pack of 10
    Pack Weight 0.278
    Range 32-50 mm
    Size 50 (2A)
    Weight 0.278kg

    Additional Information

    ACE W1 12mm Hose Clips 32-50mm
  • Band, housing and screw: zinc plated mild steel
  • DIN 3017
  • Screw mechanism applies pressure to create a tight, secure seal, preventing leaks
  • DIN 3017
  • Ace ACE1107 W1 12MM HOSE CLIPS 32-50MM
    ONLY
    £9.88
    Quantity:
    Function Hose, crankcase ventilation
    Material NBR (nitrile butadiene rubber)
    Inner diameter 2 23 mm
    Inner diameter 1 23 mm
    Hose Length 106 mm
    Type Hose, crankcase ventilation
    Gates EMH389 Crank Case Breather Pipe Hose
    ONLY
    £9.88
    Quantity:
    Function Hose, crankcase ventilation
    Length 165 mm
    Material Plastic
    Type Hose, crankcase ventilation
    Inner diameter 1 16.3 mm
    Inner diameter 2 28 mm
    Borg & Beck BTH1478 Crank Case Breather Pipe Hose
    ONLY
    £9.84
    Quantity:
    Function Hose, crankcase ventilation
    Length 165 mm
    Material Plastic
    Type Hose, crankcase ventilation
    Inner diameter 1 16.3 mm
    Inner diameter 2 28 mm
    First Line FTH1478 Crank Case Breather Pipe Hose
    ONLY
    £9.84
    Quantity:
    Title Hose Clips S/S 2A 32-50mm - Pack of 10
    Material Stainless Steel
    Pack Qty Pack of 10
    Size 32-50mm

    Additional Information

    From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Pearl Automotive will have the solution for many of these replacement problems.

    As part of their automotive spares and accessories range Pearl supply a range of replacement/spare hose clips suitable for automotive use. These stainless steel hose clips come as a pack of 10 size 2A hose clips. Each clip comes with a worm screw to seal the clip tightly into place.

    Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.

    From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Pearl Automotive will have the solution for many of these replacement problems. As part of their automotive spares and accessories range Pearl supply a range of replacement/spare hose clips suitable for automotive use. These stainless steel hose clips come as a pack of 10 size 2A hose clips. Each clip comes with a worm screw to seal the clip tightly into place. Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.
  • Hose clips made from a band of metal passing through a worm drive
  • Normally used for clamping hose from approximately 1/2"" upwards
  • Made from non-corrosive stainless steel
  • Pack of 10
  • Pearl PSHC08 Hose Clip 2a Stainless Steel X10
    ONLY
    £9.84
    Quantity:
    Title Hose Clips S/S 2 40-55mm - Pack of 10
    Material Stainless Steel
    Pack Qty Pack of 10
    Size 40-55mm

    Additional Information

    From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Pearl Automotive will have the solution for many of these replacement problems. As part of their automotive spares and accessories range Pearl supply a range of replacement/spare hose clips suitable for automotive use. These stainless steel hose clips come as a pack of 10 size 2 40mm hose clips. Each clip comes with a worm screw to seal the clip tightly into place. Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.
  • Hose clips made from a band of metal passing through a worm drive
  • Normally used for clamping hose from approximately 1/2"" upwards
  • Made from non-corrosive stainless steel
  • Pack of 10
  • Pearl PSHC09 Hose Clip 2 Stainless Steel X10
    ONLY
    £9.84
    Quantity:
    Title Hose Clips S/S 2X 45-60mm - Pack of 10
    Material Stainless Steel
    Pack Qty Pack of 10
    Size 45-60mm

    Additional Information

    From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Pearl Automotive will have the solution for many of these replacement problems.

    As part of their automotive spares and accessories range Pearl supply a range of replacement/spare hose clips suitable for automotive use. These stainless steel hose clips come as a pack of 10 size 2X hose clips. Each clip comes with a worm screw to seal the clip tightly into place.

    Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.

    From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Pearl Automotive will have the solution for many of these replacement problems. As part of their automotive spares and accessories range Pearl supply a range of replacement/spare hose clips suitable for automotive use. These stainless steel hose clips come as a pack of 10 size 2X hose clips. Each clip comes with a worm screw to seal the clip tightly into place. Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.
  • Hose clips made from a band of metal passing through a worm drive
  • Normally used for clamping hose from approximately 1/2"" upwards
  • Made from non-corrosive stainless steel
  • Pack of 10
  • Pearl PSHC10 Hose Clip 2x Stainless Steel X10
    ONLY
    £9.84
    Quantity:
    Inner diameter 1 13 mm
    Inner diameter 2 13 mm
    Hose Length 148 mm
    Material NBR (nitrile butadiene rubber)
    Colour Black
    Function Hose, crankcase ventilation
    Type Hose, crankcase ventilation
    Gates EMH606 Crank Case Breather Pipe Hose
    ONLY
    £9.81
    Quantity:
    Title Flexible Air Duct Hose - 40mm - 0.5 Meter
    Internal Dia. 40mm
    Length 0.5m

    Additional Information

  • Aluminium air duct hose
  • Flexible hose makes for easier routing
  • Heat resistant from -40 to +250 degrees celsius
  • Gates 7743-00540 Fd40x0.5 Duct Hose 40mmx0.5m
    ONLY
    £9.79
    Quantity:
    Title Superclamp M/S 60-63mm - Pack of 2
    Material Mild Steel
    Pack Qty Pack of 2
    Size 60-63mm

    Additional Information

    Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible.

    The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time.

    In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.

    From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
  • Single nut adjustment
  • Smooth band protects hose
  • Bridge piece ensures 360 deg seal
  • Solid trunion maximises torque
  • Assembly by manual or automatic tools
  • Chromium VI free finish on all materials
  • Mild steel zinc plated
  • Jubilee JSC063MSP Superclamps M/S 60-63mm Pack Of 2
    ONLY
    £9.78
    Quantity:
    Part number: BHC2006
    Type Fastening Clamp, charge air hose
    Function Fastening Clamp, charge air hose
    Diameter To 58 mm
    Diameter From 64 mm
    Quantity 5
    Borg & Beck BHC2006 HORSESHOE CLIP
    ONLY
    £9.77
    Quantity:
    Function Fastening Clamp, charge air hose
    Diameter To 58 mm
    Diameter From 64 mm
    Quantity 5
    Type Fastening Clamp, charge air hose
    First Line FHC2006 Horse Shoe Clip X5
    ONLY
    £9.77
    Quantity:
    Please enter your vehicle information above to check this fits your vehicle!
    Function Hose, crankcase ventilation
    for OE number 117 094 09 82
    Type Hose, crankcase ventilation

    Additional Information

    General Information

    These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

    Febi 26299 Crank Case Breather Pipe Hose
    ONLY
    £9.66
    Quantity:
    Title Heater Hose & Clips 1/2"" x 1m
    Size 1/2""
    Type Hose Clip

    Additional Information

    Over time hoses and pipes deteriorate. To avoid drips and leaks you may need to replace these from time to time to ensure that you vehicle is running effectively and efficiently. Pearl Automotive provide a wide range of replacement parts and accessories to cater for a wide range of circumstances.

    This length of heater hose from Pearl Automotive is 1/2 inch hose. It comes in a 1m length made from MBR.CR rubber which is suitable for use with vehicle heater systems.

    Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.

    Over time hoses and pipes deteriorate. To avoid drips and leaks you may need to replace these from time to time to ensure that you vehicle is running effectively and efficiently. Pearl Automotive provide a wide range of replacement parts and accessories to cater for a wide range of circumstances. This length of heater hose from Pearl Automotive is 1/2 inch hose. It comes in a 1m length made from MBR.CR rubber which is suitable for use with vehicle heater systems. Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.
  • Suitable for automotive heating systems with a temperature range of -40 Deg C to + 110 Deg C
  • Black EPDM Resistant to Weather Ozone
  • Heater hose & clips 1/2"" x 1m Made from EPDM rubber
  • Pearl PHH01C Heater Hose / Clips 1/2in X 1m
    ONLY
    £9.66
    Quantity:

    Page 24 of 30
    Hose & Pipe

    Your feedback more
    Trusted reviews more
    Secure payments more
    Simple returns more