Proud to be a UK-based company
Contact usHose & Pipe
Maintenance Sub-Categories
invoice Page 28 of 29
Results 811 - 840 of 868
Part number: PWN527
Important compatibility info
| Title | Hose Connector - Straight Push-Fit - 16mm - Pack Of 2 |
Additional Information
Over time small parts deteriorate. To avoid a drop in your vehicles efficiency and performance you may need to replace these from time to time to ensure that you vehicle is running effectively and efficiently. Wot-Nots provide a wide range of replacement parts and accessories to cater for a wide range of circumstances. As part of their repairs and replacements range Wot-Nots have designed a range of hoses for a wide range of applications. This Wot-Nots Hose Connector comes in a pack of 2. The connector is a straight type and is 16mm. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Waterproof
- Connects two hoses
- Constructed of plastic
ONLY
£5.45
£5.45
Part number: PWN260
Important compatibility info
| Title | Hose Clips M/S 2A 35-50mm - Pack of 2 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Wot-Nots clips are have the solution. The Mild Steel hose clips which are also known as hose clamps are manufactured with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile clips extended in various situations from home usage in plumbing, to holding and securing road sings. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Size denotes the open and close span
- Standard worm drive hose clip
ONLY
£5.42
£5.42
Part number: BHC2006S
Important compatibility info
| Type | Fastening Clamp, charge air hose |
| Function | Fastening Clamp, charge air hose |
| Diameter To | 58 mm |
| Diameter From | 64 mm |
| Quantity | 1 |
ONLY
£5.35
£5.35
Part number: FHC2006S
Important compatibility info
| Function | Fastening Clamp, charge air hose |
| Diameter To | 58 mm |
| Diameter From | 64 mm |
| Quantity | 1 |
| Type | Fastening Clamp, charge air hose |
ONLY
£5.35
£5.35
Part number: EMH325
Important compatibility info
| Function | Hose, crankcase ventilation |
| Inner diameter 1 | 18 mm |
| Material | NBR (nitrile butadiene rubber) |
| Hose Length | 126 mm |
| Colour | Black |
| Inner diameter 2 | 18 mm |
| Type | Hose, crankcase ventilation |
ONLY
£5.27
£5.27
Part number: AXC00162
Important compatibility info
| Title | Worm Drive Hose Clips 12 - 20 mm - Pack of 10 |
Additional Information
Worm Drive Hose Clips 12 - 20 mm - Pack of 10
- Reliable and strong
- Perforated band design
- Convenient pack size
- Bright zinc plated for extra protection
- Quality product
- Quality product made from Bright Zinc Plated mild steel
ONLY
£5.22
£5.22
Part number: 102470
Important compatibility info
| Length | 40.5 mm |
| Inner diameter | 14 mm |
| Inner diameter 1 | 10 mm |
| Function | Overflow Pipe, oil sump (automatic transmission) |
| for SA code | A89 |
| Type | Overflow Pipe, oil sump (automatic transmission) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£5.13
£5.13
Part number: 83404
Important compatibility info
| Title | R Clips - 4mm - Pack of 10 |
Additional Information
- Bulk packed x 10 in poly bag
- R Clips 4mm diameter
- Length 75mm
ONLY
£5.12
£5.12
Part number: 4XMS
Important compatibility info
| Title | Worm Drive Hose Clip M/S 4X 85mm-100mm |
Additional Information
- Manufactured to BS 5315:1991 and Kitemark approved
ONLY
£5.09
£5.09
Part number: FHC2000S
Important compatibility info
| Function | Fastening Clamp, charge air hose |
| Diameter To | 48 mm |
| Diameter From | 55 mm |
| Quantity | 1 |
| Type | Fastening Clamp, charge air hose |
| Thickness | 2.1 mm |
ONLY
£5.05
£5.05
Part number: PWN525
Important compatibility info
| Title | Hose Connector - Straight Push-Fit - 8mm - Pack Of 2 |
Additional Information
Over time small parts deteriorate. To avoid a drop in your vehicles efficiency and performance you may need to replace these from time to time to ensure that you vehicle is running effectively and efficiently. Wot-Nots provide a wide range of replacement parts and accessories to cater for a wide range of circumstances. As part of their repairs and replacements range Wot-Nots have designed a range of hoses for a wide range of applications. This Wot-Nots Hose Connector comes in a pack of 2. The connector is a straight type and is 8mm. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Waterproof
- Connects two hoses
- Constructed of plastic
ONLY
£4.98
£4.98
Part number: HC2985
Important compatibility info
Additional Information
Perfect for repairing damage along a line of hose, or for connecting two lengths of hose together.
- in.Perfect for repairing damage along a line of hose, or for connecting two lengths of hose togethein.
- Hose Internal Diameter: 9.5 mm / 3/8 in
ONLY
£4.97
£4.97
Part number: PWN530
Important compatibility info
| Title | Hose Connector - Y Piece Push-Fit - 6mm - Pack Of 2 |
Additional Information
Over time small parts deteriorate. To avoid a drop in your vehicles efficiency and performance you may need to replace these from time to time to ensure that you vehicle is running effectively and efficiently. Wot-Nots provide a wide range of replacement parts and accessories to cater for a wide range of circumstances. This hose connector from Wot-Nots comes in a pack of 2. It is a 'Y' piece connector with a size of 6mm. Ideal as a spare or replacement pack for joining and connecting pipes and tubing. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Waterproof
- Connects three hoses
- Constructed of plastic
ONLY
£4.96
£4.96
Part number: PWN261
Important compatibility info
| Title | Hose Clips M/S 2 40-55mm - Single Pack |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Wot-Nots clips are have the solution. The Mild Steel hose clips which are also known as hose clamps are manufactured with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile clips extended in various situations from home usage in plumbing, to holding and securing road sings. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Size denotes the open and close span
- Standard worm drive hose clip
ONLY
£4.94
£4.94
Part number: PWN594
Important compatibility info
| Title | Hose Clips S/S 2 40-60mm - Single Pack |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Wot-Nots clips are have the solution. The Mild Steel hose clips which are also known as hose clamps are manufactured with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile clips extended in various situations from home usage in plumbing, to holding and securing road sings. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Made from non corrosive stainless steel
- Normally used for clamping hose from approximately 1/2in. upwards
- Hose clip that is made from a band of metal passing through a worm drive
ONLY
£4.94
£4.94
Part number: BHC2002S
Important compatibility info
| Type | Fastening Clamp, charge air hose |
| Function | Fastening Clamp, charge air hose |
| Diameter To | 66 mm |
| Diameter From | 70 mm |
| Quantity | 1 |
ONLY
£4.93
£4.93
Part number: BHC2003S
Important compatibility info
| Type | Fastening Clamp, charge air hose |
| Function | Fastening Clamp, charge air hose |
| Diameter To | 58 mm |
| Diameter From | 66 mm |
| Quantity | 1 |
ONLY
£4.93
£4.93
Part number: FHC2002S
Important compatibility info
| Function | Fastening Clamp, charge air hose |
| Diameter To | 66 mm |
| Diameter From | 70 mm |
| Quantity | 1 |
| Type | Fastening Clamp, charge air hose |
ONLY
£4.93
£4.93
Part number: MFL1108
Important compatibility info
| Colour | Black |
| Hose Length | 310 mm |
| Function | Fuel Hose |
| Type | Fuel Hose |
| Material | HNBR (hydrogenated nitrile butadiene rubber) |
| Inner diameter 2 | 8.5 mm |
| Inner diameter 1 | 8 mm |
| Placement on Vehicle | Fuel Tank |
ONLY
£4.89
£4.89
Part number: BHC2009S
Important compatibility info
| Type | Fastening Clamp, charge air hose |
| Function | Fastening Clamp, charge air hose |
| Diameter To | 51 mm |
| Diameter From | 56 mm |
| Quantity | 1 |
ONLY
£4.85
£4.85
Part number: FHC2009S
Important compatibility info
| Function | Fastening Clamp, charge air hose |
| Diameter To | 51 mm |
| Diameter From | 56 mm |
| Quantity | 1 |
| Type | Fastening Clamp, charge air hose |
ONLY
£4.85
£4.85
Part number: EMH578
Important compatibility info
| Colour | Black |
| Material | NBR (nitrile butadiene rubber) |
| Function | Hose, crankcase ventilation |
| Type | Hose, crankcase ventilation |
| Inner diameter 1 | 11 mm |
| Hose Length | 90 mm |
| Inner diameter 2 | 11 mm |
ONLY
£4.78
£4.78
Part number: BHC2005S
Important compatibility info
| Function | Fastening Clamp, charge air hose |
| Diameter To | 59 mm |
| Diameter From | 66 mm |
| Quantity | 1 |
| Type | Fastening Clamp, charge air hose |
ONLY
£4.74
£4.74
Part number: FHC2005S
Important compatibility info
| Function | Fastening Clamp, charge air hose |
| Diameter To | 59 mm |
| Diameter From | 66 mm |
| Quantity | 1 |
| Type | Fastening Clamp, charge air hose |
ONLY
£4.74
£4.74
Part number: EMH337
Important compatibility info
| Colour | Black |
| Inner diameter 2 | 7 mm |
| Material | NBR (nitrile butadiene rubber) |
| Inner diameter 1 | 7 mm |
| Type | Hose, crankcase ventilation |
| Function | Hose, crankcase ventilation |
| Hose Length | 225 mm |
ONLY
£4.70
£4.70
Part number: PWN259
Important compatibility info
| Title | Hose Clips M/S 1X 27-40mm - Pack of 2 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Wot-Nots clips are have the solution. The Mild Steel hose clips which are also known as hose clamps are manufactured with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile clips extended in various situations from home usage in plumbing, to holding and securing road sings. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Size denotes the open and close span
- Standard worm drive hose clip
ONLY
£4.58
£4.58
Part number: PWN257
Important compatibility info
| Title | Hose Clips M/S 1A 22-30mm - Pack of 2 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Wot-Nots clips are have the solution. The Mild Steel hose clips which are also known as hose clamps are manufactured with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile clips extended in various situations from home usage in plumbing, to holding and securing road sings. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Size denotes the open and close span
- Standard worm drive hose clip
ONLY
£4.57
£4.57
Part number: PWN258
Important compatibility info
| Title | Hose Clips M/S 1 25-35mm - Pack of 2 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Wot-Nots clips are have the solution. The Mild Steel hose clips which are also known as hose clamps are manufactured with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile clips extended in various situations from home usage in plumbing, to holding and securing road sings. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Size denotes the open and close span
- Standard worm drive hose clip
ONLY
£4.57
£4.57
Part number: PWN532
Important compatibility info
| Title | Hose Connector - Y Piece Push-Fit - 10mm |
Additional Information
Over time small parts deteriorate. To avoid a drop in your vehicles efficiency and performance you may need to replace these from time to time to ensure that you vehicle is running effectively and efficiently. Wot-Nots provide a wide range of replacement parts and accessories to cater for a wide range of circumstances. This hose connector from Wot-Nots comes in a single pack. It is a 'Y' piece connector with a size of 10mm. Ideal as a spare or replacement pack for joining and connecting pipes and tubing. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Waterproof
- Connects three hoses
- Constructed of plastic
ONLY
£4.57
£4.57
Part number: PWN586
Important compatibility info
| Title | Hose Clips S/S OOO 8-12mm - Pack of 2 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Wot-Nots clips are have the solution. The Mild Steel hose clips which are also known as hose clamps are manufactured with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile clips extended in various situations from home usage in plumbing, to holding and securing road sings. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Made from non corrosive stainless steel
- Normally used for clamping hose from approximately 1/2in. upwards
- Hose clip that is made from a band of metal passing through a worm drive
ONLY
£4.57
£4.57
Page 28 of 29
Hose & Pipe
