Hose & Pipe

Title Hose Clips S/S OOO 8-12mm - Pack of 2

Additional Information

From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Wot-Nots clips are have the solution. The Mild Steel hose clips which are also known as hose clamps are manufactured with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile clips extended in various situations from home usage in plumbing, to holding and securing road sings. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
  • Made from non corrosive stainless steel
  • Normally used for clamping hose from approximately 1/2in. upwards
  • Hose clip that is made from a band of metal passing through a worm drive
Wot-Nots PWN586 Hose Clip S/S Ooo 8-12mm X2
ONLY
£4.62
Quantity:
Title Hose Clips S/S OX 16-25mm - Pack of 2

Additional Information

From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Wot-Nots clips are have the solution. The Mild Steel hose clips which are also known as hose clamps are manufactured with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile clips extended in various situations from home usage in plumbing, to holding and securing road sings. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
  • Made from non corrosive stainless steel
  • Normally used for clamping hose from approximately 1/2in. upwards
  • Hose clip that is made from a band of metal passing through a worm drive
Wot-Nots PWN589 Hose Clip S/S Ox 16-25mm X2
ONLY
£4.62
Quantity:
Title Hose Clips M/S 1X 27-40mm - Pack of 2

Additional Information

From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Wot-Nots clips are have the solution. The Mild Steel hose clips which are also known as hose clamps are manufactured with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile clips extended in various situations from home usage in plumbing, to holding and securing road sings. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
  • Size denotes the open and close span
  • Standard worm drive hose clip
Wot-Nots PWN259 Standard Hose Clips 1x 27-40mm X2
ONLY
£4.63
Quantity:
Title Hose Tail 9.5mm (3/8) i/d Hose to Male Thread R 1/4

Additional Information

Corrosive-resistant plated hose Tail Adaptor connects hose to a female fitting.
  • Connects the hose to a female fitting
  • Corrosive-resistant
  • Thread size: R 1/4
  • Thread type: Male
  • Nominal Bore (mm): 4.8
  • Flow Rate: 43 cfm @ 100 psi
  • Maximum Working Pressure: 14 bar / 200 psi
PCL HC1217 Hose Tail 9.5mm (3/8) I/D Hose To R 1/4
ONLY
£4.65
Quantity:
Colour Black
Inner diameter 2 7 mm
Material NBR (nitrile butadiene rubber)
Inner diameter 1 7 mm
Type Hose, crankcase ventilation
Function Hose, crankcase ventilation
Hose Length 225 mm
Gates EMH337 Crank Case Breather Pipe Hose
ONLY
£4.71
Quantity:
Colour Black
Material NBR (nitrile butadiene rubber)
Function Hose, crankcase ventilation
Type Hose, crankcase ventilation
Inner diameter 1 11 mm
Hose Length 90 mm
Inner diameter 2 11 mm
Gates EMH578 Crank Case Breather Pipe Hose
ONLY
£4.76
Quantity:
Part number: BHC2005S
Function Fastening Clamp, charge air hose
Diameter To 59 mm
Diameter From 66 mm
Quantity 1
Type Fastening Clamp, charge air hose
Borg & Beck BHC2005S HORSESHOE CLIP
ONLY
£4.80
Quantity:
Part number: BHC2009S
Type Fastening Clamp, charge air hose
Function Fastening Clamp, charge air hose
Diameter To 51 mm
Diameter From 56 mm
Quantity 1
Borg & Beck BHC2009S HORSESHOE CLIP
ONLY
£4.93
Quantity:
Part number: FHC2009S
Function Fastening Clamp, charge air hose
Diameter To 51 mm
Diameter From 56 mm
Quantity 1
Type Fastening Clamp, charge air hose
First Line FHC2009S Horse Shoe Clip
ONLY
£4.93
Quantity:
Title Hose Clips M/S 2 40-55mm - Single Pack

Additional Information

From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Wot-Nots clips are have the solution. The Mild Steel hose clips which are also known as hose clamps are manufactured with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile clips extended in various situations from home usage in plumbing, to holding and securing road sings. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
  • Size denotes the open and close span
  • Standard worm drive hose clip
Wot-Nots PWN261 Hose Clip Standard Size 2 40-55mm
ONLY
£4.97
Quantity:

Page 4 of 83
Hose & Pipe

Your feedback more
Trusted reviews more
Secure payments more
Simple returns more