Proud to be a UK-based company
Contact usThreaded Fasteners
Maintenance Sub-Categories
invoice Page 7 of 13
Results 31 - 35 of 63
Part number: PWN1297
Important compatibility info
| Title | Threaded Bar M8 x 300mm |
Additional Information
Threaded Bar M8 x 300mm inc. Nuts and Washers
- 300mm Length
- Can Be Cut To Desired Stud Size
- PWN1297
ONLY
£4.51
£4.51
Part number: PWN675
Important compatibility info
| Title | Set Screw & Nut - M14 x 75mm |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. This Set Screw and Nut from Wot-Nots are commonly known as a bolt it is completely threaded with a 1.5 pitch, and has the benefits of being high tensile to withstand high torque settings. The zinc plated screws are M14 and boast a fine thread 75mm long. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Supplied with matching nut
- Benefits of being high tensile to withstand high torque settings
- Commonly known as a bolt this product is completely threaded with a 1.5 pitch
ONLY
£4.52
£4.52
Part number: 24362
Important compatibility info
| Surface | Zink flake coated |
| External Thread Size | M10 x 1,5 |
| Length | 39 mm |
| Outer diameter | 20 mm |
| Spanner Size | 13 |
| Bolt Head/Nut Design | External Hexagon |
| Quality/ Grade | 10.9 |
| Function | Screw |
| Screw length below head | 30 mm |
| Type | Screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£4.63
£4.63
Part number: 02141
Important compatibility info
| Surface | Zinc-coated |
| Bolt Head/Nut Design | External Hexagon |
| Quality/ Grade | 10.9 |
| Bolt / Nut Version | Tensilock |
| Function | Screw |
| Length | 40 mm |
| External Thread Size | M14 x 1,5 |
| Type | Screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£4.85
£4.85
Part number: 2912732203
Important compatibility info
| Function | Screw |
| Type | Screw |
| Replaced by | 2912738203 |
ONLY
£5.24
£5.24
Page 7 of 13
Threaded Fasteners
