Generic Lighting by Hella

• 1x Hella Lens, rotating beacon (9EL856418-001)
• 1x Hella Timing Belt Kit (9XR854840-001)
• 1x Hella Base, rotating beacon (9GD856562-001)
• 1x Hella Reflector, rotating beacon (9DX859560-001)

• 1x Hella Lens, rotating beacon (9EL856416-001)
• 1x Hella Timing Belt Kit (9XR854840-001)
• 1x Hella Reflector, rotating beacon (9DX859560-001)

• 1x Hella Lens, rotating beacon (9EL860627-001)
• 1x Hella Timing Belt Kit (9XR854840-001)
• 1x Hella Electric Motor, rotating beacon (9MN862741-001)
• 1x Hella Bulb (8GH002089-251)

• 1x Hella Lens, rotating beacon (9EL862141-001)
• 1x Hella Lens, rotating beacon (9EL862141-021)
• 1x Hella Timing Belt Kit (9XR854840-001)
• 1x Hella Electric Motor, rotating beacon (9MN862741-001)
• 1x Hella Reflector, rotating beacon (9DX862740-001)
• 1x Hella Bulb (8GH002089-251)
• 1x Hella Base, rotating beacon (9GD862164-001)

Technical Information

Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.

Technical Information

Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.

• 1x Hella Lens, rotating beacon (9EL856418-001)
• 1x Hella Timing Belt Kit (9XR854840-001)
• 1x Hella Bulb (8GH002089-133)
• 1x Hella Base, rotating beacon (9GD856562-001)
• 1x Hella Reflector, rotating beacon (9DX859560-001)

• 1x Hella Lens, rotating beacon (9EL864074-001)
• 1x Hella Timing Belt Kit (9XR855975-001)
• 1x Hella Bulb (8GH002089-251)

• 1x Hella Lens, rotating beacon (9EL860627-001)
• 1x Hella Bulb (8GH002089-251)

Technical Information

Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.

Technical Information

Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.

Technical Information

With prism-type lens patterning for far-reaching illumination. Optimal inclination angle: 15° - 20°. Black fibre-glass reinforced plastic housing with extending edge to protect lens. Universal bracket with M10 fixing screw for mounting upright or pendant. Additional attachment possibility with U-bracket 9XD 130 261-001. Type of protection: IP5K4K. Light aperture: 135 x 75 mm. H3 work lamp

• 1x Hella Insert, worklight (1GA132459-011)

General Information

*** The HELLA VALUEFIT principle: Quality tested by HELLA at a good price.

Technical Information

Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.

Technical Information

Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.