Proud to be a UK-based company
Contact usCar Parts & Accessories by Hella
Important compatibility info
| Placement on Vehicle | Left, Right |
| Length | 130 mm |
| Height | 32 mm |
| Width | 32 mm |
| Additional Information 2 | with pipe |
| Voltage | 12 V |
| Number of Poles | 2 -pin connector |
| Bulb Type | LED |
| Light Function | with reflector, with side marker light (LED) |
| Housing Colour | Black |
| Light Design | LED |
| Mounting Type | mounting, Screw Connection |
| Quantity | 1 |
| Cable Length | 1500 mm |
| Number of light functions | 2 |
| Housing Type | Housing with Plastic Lid |
| Lens Colour | yellow (amber) |
| Registration Type | ADR/GGVS approved, CCC approved |
| Fastening Type | for horizontal fastening |
| Plug Type | open cable ends |
| Power Consumption | 0.4 W |
| Protection Type (IP Code) | IP6K9K |
| Number of LEDs | 1 |
| LED Colour | yellow (amber) |
| Type | Side Marker Light |
| Fulfils ECE norm | R3, R91 |
| Function | Side Marker Light |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
£15.01
Important compatibility info
| Additional Information | with bulb holder, without bulb |
| Bulb Type | P21W |
| Light Function | with indicator |
| Mounting Type | mounting, Screw Connection |
| Number of light functions | 1 |
| Lens Colour | yellow (amber) |
| Height | 55 mm |
| Width | 144 mm |
| Placement on Vehicle | Left, Lateral Mounting |
| Registration Type | ECE approved, ADR/GGVS approved, CCC approved |
| Light Design | Bulb Technology |
| Function | Auxiliary Direction Indicator |
| Voltage | 12 V. 24 V |
| Colour | yellow (amber) |
| Quantity | 1 |
| Fastening Type | for horizontal fastening |
| Conductor Number | 2 conductor |
| Plug Type | Male |
| Type | Auxiliary Direction Indicator |
| Fulfils ECE norm | R6 |
£15.14
Important compatibility info
| Additional Information | with bulb holder, without bulb |
| Bulb Type | P21W |
| Light Function | with indicator |
| Mounting Type | mounting, Screw Connection |
| Number of light functions | 1 |
| Lens Colour | yellow (amber) |
| Height | 55 mm |
| Width | 144 mm |
| Placement on Vehicle | Left, Lateral Mounting |
| Registration Type | ECE approved, ADR/GGVS approved, CCC approved |
| Light Design | Bulb Technology |
| Function | Auxiliary Direction Indicator |
| Voltage | 12 V. 24 V |
| Colour | yellow (amber) |
| Quantity | 1 |
| Fastening Type | for horizontal fastening |
| Conductor Number | 2 conductor |
| Plug Type | Male |
| Type | Auxiliary Direction Indicator |
| Fulfils ECE norm | R6 |
£15.14
Important compatibility info
| Placement on Vehicle | Left, Right |
| Length | 84 mm |
| Height | 51 mm |
| Width | 84 mm |
| Additional Information 2 | without bulbs |
| Voltage | 12 V. 24 V |
| Bulb Type | P21W, C5W |
| Light Function | with stop light, with taillight |
| Housing Colour | Black |
| Light Design | Bulb Technology |
| Mounting Type | mounting, Bolted |
| Number of light functions | 2 |
| Lens Colour | Red |
| Registration Type | ECE approved |
| Fastening Type | for horizontal fastening |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
Additional Information
Brief Information
*** Original spare part
- 1x Hella Lens, tail light assembly (9EL115003-035)
£15.14
Important compatibility info
| Placement on Vehicle | Left, Right |
| Length | 84 mm |
| Height | 51 mm |
| Width | 84 mm |
| Additional Information 2 | without bulbs |
| Voltage | 12 V. 24 V |
| Bulb Type | P21W, C5W |
| Light Function | with stop light, with taillight |
| Housing Colour | Black |
| Light Design | Bulb Technology |
| Mounting Type | mounting, Bolted |
| Number of light functions | 2 |
| Lens Colour | Red |
| Registration Type | ECE approved |
| Fastening Type | for horizontal fastening |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
Additional Information
Brief Information
*** Original spare part
- 1x Hella Lens, tail light assembly (9EL115003-035)
£15.14
Important compatibility info
| Length | 89 mm |
| Material | PA (polyamide) |
| Number of Poles | 3 -pin connector |
| Colour | Black |
| Number of Connectors / Ports | 3 |
| Quantity | 1 |
| Current Strength | 25 A |
| DIN / ISO | 9680 |
| Voltage from | 6 V |
| Plug Type | Screw Contact |
| Voltage to | 24 V |
| Type | Plug |
| Cross Section | 2.5 mm² |
| Cable diameter from | 6 mm |
| Temperature range from | -40 °C |
| Cable diameter to | 8 mm |
| Temperature range to | +85 °C |
| Function | Plug |
£15.19
Important compatibility info
| Placement on Vehicle | Front |
| Length | 130 mm |
| Height | 16 mm |
| Width | 32 mm |
| Additional Information 2 | with pipe, Electromagnetic Compatibility (EMC) |
| Voltage | 24 V |
| Bulb Type | LED |
| Light Function | with reflector, with position light (LED) |
| Housing Colour | Black |
| Light Design | LED |
| Mounting Type | mounting, Screw Connection |
| Quantity | 50 |
| Cable Length | 500 mm |
| Number of light functions | 2 |
| Lens Colour | Crystal clear |
| Registration Type | ECE approved, SAE approved, ADR/GGVS approved |
| Fastening Type | for horizontal fastening, for vertical fastening |
| Plug Type | open cable ends |
| Power Consumption | 1 W |
| Protection Type (IP Code) | IP6K9K |
| Number of LEDs | 1 |
| LED Colour | White |
| Type | Position Light |
| Fulfils ECE norm | R3, R7 |
| Function | Position Light |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
£15.20
Important compatibility info
| Voltage | 24 V |
| Bulb Type | Socket Bulb |
| Rated Power | 1,2 W |
| Light Design | Halogen |
| Quantity | 10 |
| Packing Type | Carton |
| Type | Bulb, instrument lighting |
| Function | Bulb, instrument lighting |
| Extra Description | HEAVY DUTY |
| Bulb Colour | Crystal clear |
£15.25
Important compatibility info
| Voltage | 24 V |
| Bulb Type | Socket Bulb |
| Rated Power | 1,2 W |
| Light Design | Halogen |
| Quantity | 10 |
| Packing Type | Carton |
| Type | Bulb, instrument lighting |
| Function | Bulb, instrument lighting |
| Extra Description | HEAVY DUTY |
| Bulb Colour | Crystal clear |
£15.25
Important compatibility info
| Bulb Type | LED |
| Light Design | LED |
| Light Function | with reflector, with side marker light (LED) |
| Width | 34 mm |
| Number of Poles | 2 -pin connector |
| Housing Colour | Black |
| Height | 16 mm |
| Cable Length | 500 mm |
| Voltage | 12 V. 24 V |
| Mounting Type | Glued, mounting |
| Housing Type | Housing with Plastic Lid |
| Number of light functions | 2 |
| Quantity | 1 |
| Length | 168 mm |
| Placement on Vehicle | Left, Right |
| Lens Colour | yellow (amber) |
| Registration Type | SAE approved, ADR/GGVS approved |
| Fastening Type | for horizontal fastening |
| Plug Type | open cable ends |
| Power Consumption | 0.55 W. 1.3 W |
| Protection Type (IP Code) | IP6K7, IPX9K |
| Number of LEDs | 3 |
| LED Colour | yellow (amber) |
| Type | Side Marker Light |
| Fulfils ECE norm | R3, R91 |
| Function | Side Marker Light |
| Extra Description | SHAPELINE TECH |
£15.39
Important compatibility info
| Placement on Vehicle | Left, Right |
| Additional Information | with gasket/seal, without bulb holder |
| Additional Information 2 | with bolts/screws |
| Bulb Type | P21W, R5W |
| Light Function | with indicator, with stop light, with licence plate light, with taillight |
| Light Design | Halogen |
| Number of light functions | 4 |
| Registration Type | ECE approved |
| Type | Lens, tail light assembly |
| Function | Lens, tail light assembly |
£15.85
Important compatibility info
| Placement on Vehicle | Front |
| Length | 130 mm |
| Height | 16 mm |
| Width | 32 mm |
| Additional Information 2 | with pipe, Electromagnetic Compatibility (EMC) |
| Voltage | 24 V |
| Bulb Type | LED |
| Light Function | with reflector, with position light (LED) |
| Housing Colour | Black |
| Light Design | LED |
| Mounting Type | mounting, Screw Connection |
| Quantity | 1 |
| Cable Length | 500 mm |
| Number of light functions | 2 |
| Lens Colour | Crystal clear |
| Registration Type | ECE approved, SAE approved, ADR/GGVS approved |
| Fastening Type | for horizontal fastening, for vertical fastening |
| Plug Type | open cable ends |
| Power Consumption | 1 W |
| Protection Type (IP Code) | IP6K9K |
| Number of LEDs | 1 |
| LED Colour | White |
| Type | Position Light |
| Fulfils ECE norm | R3, R7 |
| Function | Position Light |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
£15.94
Important compatibility info
£15.98
Important compatibility info
| Bulb Type | LED |
| Number of Poles | 2 -pin connector |
| Height | 28 mm |
| Voltage | 12 V |
| Width | 23 mm |
| Placement on Vehicle | Left, Right |
| Length | 135 mm |
| Light Function | with reflector, with side marker light (LED) |
| Housing Colour | Black |
| Light Design | LED |
| Mounting Type | Glued, mounting |
| Quantity | 1 |
| Cable Length | 250 mm |
| Number of light functions | 2 |
| Housing Type | Housing with Plastic Lid |
| Lens Colour | yellow (amber) |
| Registration Type | CCC approved |
| Fastening Type | for horizontal fastening |
| Plug Type | AMP |
| Power Consumption | 0.5 W |
| Protection Type (IP Code) | IP5K9K |
| Number of LEDs | 2 |
| LED Colour | yellow (amber) |
| Type | Side Marker Light |
| Fulfils ECE norm | R3, R91 |
| Function | Side Marker Light |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
£16.12
Important compatibility info
| Placement on Vehicle | Left, Right |
| Length | 135 mm |
| Height | 28 mm |
| Width | 23 mm |
| Voltage | 24 V |
| Number of Poles | 2 -pin connector |
| Bulb Type | LED |
| Light Function | with reflector, with side marker light |
| Housing Colour | Black |
| Light Design | LED |
| Mounting Type | mounting, Screw Connection |
| Quantity | 300 |
| Cable Length | 250 mm |
| Number of light functions | 2 |
| Housing Type | Housing with Plastic Lid |
| Lens Colour | yellow (amber) |
| Registration Type | CCC approved |
| Fastening Type | for horizontal fastening |
| Plug Type | AMP |
| Power Consumption | 1 W |
| Protection Type (IP Code) | IP5K9K |
| Number of LEDs | 2 |
| LED Colour | yellow (amber) |
| Type | Side Marker Light |
| Fulfils ECE norm | R3, R91 |
| Function | Side Marker Light |
£16.22
Important compatibility info
| Additional Information | with gaskets/seals |
| Opening Temperature | 81 °C |
| Type | Thermostat, coolant |
| Function | Thermostat, coolant |
£16.26
Important compatibility info
| Additional Information | with gaskets/seals |
| Opening Temperature | 81 °C |
| Type | Thermostat, coolant |
| Function | Thermostat, coolant |
£16.26
Important compatibility info
| Placement on Vehicle | Left, Right |
| Additional Information | without bulb holder |
| Additional Information 2 | with bolts/screws |
| Bulb Type | P21W, R10W |
| Light Function | with indicator, with stop light, with licence plate light, with taillight |
| Light Design | Halogen |
| Number of light functions | 4 |
| Registration Type | ECE approved |
| Type | Lens, tail light assembly |
| Function | Lens, tail light assembly |
£16.36
Important compatibility info
| Placement on Vehicle | Left, Right |
| Length | 139 mm |
| Width | 116 mm |
| Additional Information 2 | without bulbs |
| Voltage | 24 V |
| Bulb Type | P21W |
| Light Function | with reverse light |
| Housing Colour | Black |
| Light Design | Halogen |
| Mounting Type | Fitting |
| Number of light functions | 1 |
| Lens Colour | Crystal clear |
| Registration Type | ADR/GGVS approved |
| Fastening Type | for vertical fastening, for horizontal fastening |
| Plug Type | Blade Terminal |
| Type | Reverse Light |
| Fulfils ECE norm | R23 |
| Function | Reverse Light |
Additional Information
Brief Information
*** Original spare part
- 1x Hella Lens, reverse light (9EL119544-111)
£16.72
Important compatibility info
| Placement on Vehicle | Left, Right |
| Length | 139 mm |
| Width | 116 mm |
| Additional Information 2 | without bulbs |
| Voltage | 24 V |
| Bulb Type | P21W |
| Light Function | with reverse light |
| Housing Colour | Black |
| Light Design | Halogen |
| Mounting Type | Fitting |
| Number of light functions | 1 |
| Lens Colour | Crystal clear |
| Registration Type | ADR/GGVS approved |
| Fastening Type | for vertical fastening, for horizontal fastening |
| Plug Type | Blade Terminal |
| Type | Reverse Light |
| Fulfils ECE norm | R23 |
| Function | Reverse Light |
Additional Information
Brief Information
*** Original spare part
- 1x Hella Lens, reverse light (9EL119544-111)
£16.72
Important compatibility info
| Placement on Vehicle | Left, Lateral Installation |
| Additional Information | with bulb holder |
| Additional Information 2 | without bulbs |
| Voltage | 24 V |
| Bulb Type | P21W |
| Light Function | with indicator |
| Light Design | Bulb Technology |
| Mounting Type | Fitting |
| Number of light functions | 1 |
| Lens Colour | yellow (amber) |
| Registration Type | ECE approved, CCC approved |
| Type | Auxiliary Direction Indicator |
| Function | Auxiliary Direction Indicator |
£16.89
Important compatibility info
| Placement on Vehicle | Left, Lateral Installation |
| Additional Information | with bulb holder |
| Additional Information 2 | without bulbs |
| Voltage | 24 V |
| Bulb Type | P21W |
| Light Function | with indicator |
| Light Design | Bulb Technology |
| Mounting Type | Fitting |
| Number of light functions | 1 |
| Lens Colour | yellow (amber) |
| Registration Type | ECE approved, CCC approved |
| Type | Auxiliary Direction Indicator |
| Function | Auxiliary Direction Indicator |
£16.89
Important compatibility info
| Mounting Type | Fitting |
| Voltage | 24 V |
| Colour Frontring | Green |
| Function | Cigarette Lighter |
| Type | Cigarette Lighter |
| Plug Type | Blade Terminal |
| Capacity at 24V | 5A |
| Fastening Type | Clamping sleeve |
£16.89
Important compatibility info
| Operating Mode | Electric |
| Function | Actuator, headlight levelling |
| Registration Type | ECE approved |
| Type | Actuator, headlight levelling |
| Additional Information 2 | Electromagnetic Compatibility (EMC) |
| Voltage | 12 V |
£16.94
Important compatibility info
| Operating Mode | Electric |
| Function | Actuator, headlight levelling |
| Registration Type | ECE approved |
| Type | Actuator, headlight levelling |
| Additional Information 2 | Electromagnetic Compatibility (EMC) |
| Voltage | 12 V |
£16.94
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Number of Poles | 2 -pin connector |
| Sensor Type | Inductive Sensor |
| Cable Length | 330 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
£17.02
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Number of Poles | 2 -pin connector |
| Sensor Type | Inductive Sensor |
| Cable Length | 330 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
£17.02
Important compatibility info
| Placement on Vehicle | Left, Right |
| Length | 130 mm |
| Height | 16 mm |
| Width | 32 mm |
| Additional Information 2 | with pipe |
| Voltage | 24 V |
| Number of Poles | 2 -pin connector |
| Bulb Type | LED |
| Light Function | with side marker light (LED), with reflector |
| Housing Colour | Black |
| Light Design | LED |
| Mounting Type | Screw Connection, mounting |
| Quantity | 50 |
| Cable Length | 180 mm |
| Number of light functions | 2 |
| Housing Type | Housing with Plastic Lid |
| Lens Colour | yellow (amber) |
| Registration Type | CCC approved, ADR/GGVS approved |
| Fastening Type | for vertical fastening |
| Plug Type | AMP |
| Power Consumption | 1 W |
| Protection Type (IP Code) | IP6K9K |
| Number of LEDs | 1 |
| LED Colour | yellow (amber) |
| Type | Side Marker Light |
| Fulfils ECE norm | R3, R91 |
| Function | Side Marker Light |
£17.22
Important compatibility info
| Bulb Colour | Crystal clear |
| Voltage | 12 V |
| Bulb Type | H15 |
| Rated Power | 55/15 W |
| Light Design | Halogen |
| Quantity | 1 |
| Packing Type | Carton |
| Registration Type | ECE approved |
| Type | Bulb, spotlight |
| Function | Bulb, spotlight |
| Extra Description | STANDARD |
| Base design light bulb | PGJ23t-1 |
£17.63
Important compatibility info
| Bulb Colour | Crystal clear |
| Voltage | 12 V |
| Bulb Type | H15 |
| Rated Power | 55/15 W |
| Light Design | Halogen |
| Quantity | 1 |
| Packing Type | Carton |
| Registration Type | ECE approved |
| Type | Bulb, spotlight |
| Function | Bulb, spotlight |
| Extra Description | STANDARD |
| Base design light bulb | PGJ23t-1 |
£17.63
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023