Car Parts & Accessories by Hella
Hella is a global supplier of automotive components supplying both OE and the aftermarket with quality products. Important compatibility info
| Placement on Vehicle | before exhaust turbocharger |
| Additional Information 2 | with fastening clips on the cable |
| Number of Poles | 2 -pin connector |
| Mounting Type | Bolted |
| Cable Length | 495 mm |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
Important compatibility info
| Placement on Vehicle | before exhaust turbocharger |
| Additional Information 2 | with fastening clips on the cable |
| Number of Poles | 2 -pin connector |
| Mounting Type | Bolted |
| Cable Length | 495 mm |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
Important compatibility info
| Battery Type Code | 063 |
| Cold Cranking Amperage (CCA) | 390 A |
| Other Part Number | 063 |
| Voltage | 12V |
| Warranty | 4 Year Warranty |
| Hold-down Type | B13 |
| Terminal Type | 1 |
| Type | Lead Acid Battery |
| Length | 210 mm |
| Width | 175 mm |
| Height | 175 mm |
| Ampere-Hours | 41Ah |
| Terminal Layout | 0 |
Important compatibility info
| Battery Type Code | 063 |
| Cold Cranking Amperage (CCA) | 390 A |
| Other Part Number | 063 |
| Voltage | 12V |
| Warranty | 4 Year Warranty |
| Hold-down Type | B13 |
| Terminal Type | 1 |
| Type | Lead Acid Battery |
| Length | 210 mm |
| Width | 175 mm |
| Height | 175 mm |
| Ampere-Hours | 41Ah |
| Terminal Layout | 0 |
Important compatibility info
| Placement on Vehicle | Left, Right |
| Length | 98 mm |
| Voltage | 24 V |
| Bulb Type | LED |
| Light Function | with taillight (LED), with stop light (LED) |
| Housing Colour | Black |
| Light Design | LED |
| Mounting Type | mounting, Fitting |
| Cable Length | 160 mm |
| Number of light functions | 2 |
| Housing Type | Synthetic Material Housing |
| Lens Colour | Crystal clear |
| Registration Type | ECE approved |
| Plug Type | open cable ends |
| Number of LEDs | 12 |
| LED Colour | Red |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
Important compatibility info
| Placement on Vehicle | Left, Right |
| Length | 98 mm |
| Voltage | 24 V |
| Bulb Type | LED |
| Light Function | with taillight (LED), with stop light (LED) |
| Housing Colour | Black |
| Light Design | LED |
| Mounting Type | mounting, Fitting |
| Cable Length | 160 mm |
| Number of light functions | 2 |
| Housing Type | Synthetic Material Housing |
| Lens Colour | Crystal clear |
| Registration Type | ECE approved |
| Plug Type | open cable ends |
| Number of LEDs | 12 |
| LED Colour | Red |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
Important compatibility info
| Placement on Vehicle | before soot particulate filter |
| Number of Poles | 2 -pin connector |
| Mounting Type | Bolted |
| Cable Length | 345 mm |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
Important compatibility info
| Placement on Vehicle | before soot particulate filter |
| Number of Poles | 2 -pin connector |
| Mounting Type | Bolted |
| Cable Length | 345 mm |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
Important compatibility info
| Mounting Type | Clipped |
| Number of Poles | 3 -pin connector |
| Function | Rain Sensor |
| Additional Information 2 | without cable |
| not for SA code | 610A Headup Display |
| Type | Rain Sensor |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
Important compatibility info
| Mounting Type | Clipped |
| Number of Poles | 3 -pin connector |
| Function | Rain Sensor |
| Additional Information 2 | without cable |
| not for SA code | 610A Headup Display |
| Type | Rain Sensor |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
Important compatibility info
| Placement on Vehicle | Right |
| Additional Information | with bulb, with bulb holder |
| Paired article numbers | 2ZR 009 774-111 |
| Bulb Type | P21W |
| Light Function | with rear fog light |
| Left-hand / Right-hand Traffic | for left-hand traffic |
| Light Design | Halogen |
| Number of light functions | 1 |
| Section | Lower Section |
| Registration Type | ECE approved, CCC approved |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
Additional Information
Brief Information
*** Original spare part
- 1x Hella Bulb (8GA002073-121)
Important compatibility info
| Placement on Vehicle | Right |
| Additional Information | with bulb, with bulb holder |
| Paired article numbers | 2ZR 009 774-111 |
| Bulb Type | P21W |
| Light Function | with rear fog light |
| Left-hand / Right-hand Traffic | for left-hand traffic |
| Light Design | Halogen |
| Number of light functions | 1 |
| Section | Lower Section |
| Registration Type | ECE approved, CCC approved |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
Additional Information
Brief Information
*** Original spare part
- 1x Hella Bulb (8GA002073-121)
Important compatibility info
| Placement on Vehicle | Left |
| Additional Information | with bulb, with bulb holder |
| Paired article numbers | 2NR 009 774-101 |
| Bulb Type | P21W |
| Light Function | with reverse light |
| Left-hand / Right-hand Traffic | for left-hand traffic |
| Light Design | Halogen |
| Number of light functions | 1 |
| Section | Lower Section |
| Registration Type | ECE approved, CCC approved |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
Additional Information
Brief Information
*** Original spare part
- 1x Hella Bulb (8GA002073-121)
Important compatibility info
| Placement on Vehicle | Left |
| Additional Information | with bulb, with bulb holder |
| Paired article numbers | 2NR 009 774-101 |
| Bulb Type | P21W |
| Light Function | with reverse light |
| Left-hand / Right-hand Traffic | for left-hand traffic |
| Light Design | Halogen |
| Number of light functions | 1 |
| Section | Lower Section |
| Registration Type | ECE approved, CCC approved |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
Additional Information
Brief Information
*** Original spare part
- 1x Hella Bulb (8GA002073-121)
Important compatibility info
| Voltage | 12V |
| Height | 190 mm |
| Width | 175 mm |
| Terminal Layout | 0 |
| Length | 175 mm |
| Terminal Type | 1 |
| Hold-down Type | B13 |
| Ampere-Hours | 40Ah |
| Cold Cranking Amperage (CCA) | 340 A |
| Other Part Number | 002L |
| Type | Lead Acid Battery |
| Battery Type Code | 002L |
| Warranty | 4 Year Warranty |
Important compatibility info
| Voltage | 12V |
| Height | 190 mm |
| Width | 175 mm |
| Terminal Layout | 0 |
| Length | 175 mm |
| Terminal Type | 1 |
| Hold-down Type | B13 |
| Ampere-Hours | 40Ah |
| Cold Cranking Amperage (CCA) | 340 A |
| Other Part Number | 002L |
| Type | Lead Acid Battery |
| Battery Type Code | 002L |
| Warranty | 4 Year Warranty |
Important compatibility info
| Number of Poles | 3 -pin connector |
| Type | Rain Sensor |
| Mounting Type | Clipped |
| Function | Rain Sensor |
| Glass | with humidity sensor |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
Important compatibility info
| Number of Poles | 3 -pin connector |
| Type | Rain Sensor |
| Mounting Type | Clipped |
| Function | Rain Sensor |
| Glass | with humidity sensor |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
Important compatibility info
| Terminal Layout | 0 |
| Type | Lead Acid Battery |
| Hold-down Type | B13 |
| Terminal Type | 1 |
| Other Part Number | 012 |
| Cold Cranking Amperage (CCA) | 360 A |
| Battery Type Code | 012 |
| Length | 210 mm |
| Height | 190 mm |
| Width | 175 mm |
| Voltage | 12V |
| Ampere-Hours | 42Ah |
| Warranty | 3 Year Warranty |
Important compatibility info
| Terminal Layout | 0 |
| Type | Lead Acid Battery |
| Hold-down Type | B13 |
| Terminal Type | 1 |
| Other Part Number | 012 |
| Cold Cranking Amperage (CCA) | 360 A |
| Battery Type Code | 012 |
| Length | 210 mm |
| Height | 190 mm |
| Width | 175 mm |
| Voltage | 12V |
| Ampere-Hours | 42Ah |
| Warranty | 3 Year Warranty |
Important compatibility info
| Warranty | 4 Year Warranty |
| Height | 190 mm |
| Other Part Number | 077 |
| Cold Cranking Amperage (CCA) | 390 A |
| Terminal Layout | 1 |
| Length | 210 mm |
| Battery Type Code | 077 |
| Type | Lead Acid Battery |
| Voltage | 12V |
| Ampere-Hours | 45Ah |
| Width | 175 mm |
| Hold-down Type | B13 |
| Terminal Type | 1 |
Important compatibility info
| Warranty | 4 Year Warranty |
| Height | 190 mm |
| Other Part Number | 077 |
| Cold Cranking Amperage (CCA) | 390 A |
| Terminal Layout | 1 |
| Length | 210 mm |
| Battery Type Code | 077 |
| Type | Lead Acid Battery |
| Voltage | 12V |
| Ampere-Hours | 45Ah |
| Width | 175 mm |
| Hold-down Type | B13 |
| Terminal Type | 1 |
Important compatibility info
| Length | 265 mm |
| Height | 33 mm |
| Function | Interior Light |
| Type | Interior Light |
| Number of LEDs | 10 |
| Power Consumption | 2.0 W |
| Lens Colour | Crystal clear |
| Depth | 30 mm |
| Current Strength | 0.09 A |
| Cable Length | 2500 mm |
| Quantity | 1 |
| Mounting Type | Fitting, Screw Connection |
| Housing Colour | Black |
| Light Function | with cabin light |
| Voltage | 24 V |
| Number of light functions | 1 |
| Light Design | LED |
| Bulb Type | LED |
| Placement on Vehicle | Interior |
Important compatibility info
| Length | 265 mm |
| Height | 33 mm |
| Function | Interior Light |
| Type | Interior Light |
| Number of LEDs | 10 |
| Power Consumption | 2.0 W |
| Lens Colour | Crystal clear |
| Depth | 30 mm |
| Current Strength | 0.09 A |
| Cable Length | 2500 mm |
| Quantity | 1 |
| Mounting Type | Fitting, Screw Connection |
| Housing Colour | Black |
| Light Function | with cabin light |
| Voltage | 24 V |
| Number of light functions | 1 |
| Light Design | LED |
| Bulb Type | LED |
| Placement on Vehicle | Interior |
Important compatibility info
| Battery Type Code | 063 |
| Voltage | 12V |
| Hold-down Type | B13 |
| Terminal Type | 1 |
| Ampere-Hours | 41Ah |
| Width | 175 mm |
| Length | 210 mm |
| Height | 175 mm |
| Other Part Number | 063 |
| Cold Cranking Amperage (CCA) | 360 A |
| Type | Lead Acid Battery |
| Warranty | 3 Year Warranty |
| Terminal Layout | 0 |
Important compatibility info
| Battery Type Code | 063 |
| Voltage | 12V |
| Hold-down Type | B13 |
| Terminal Type | 1 |
| Ampere-Hours | 41Ah |
| Width | 175 mm |
| Length | 210 mm |
| Height | 175 mm |
| Other Part Number | 063 |
| Cold Cranking Amperage (CCA) | 360 A |
| Type | Lead Acid Battery |
| Warranty | 3 Year Warranty |
| Terminal Layout | 0 |
Important compatibility info
| Placement on Vehicle | after soot particulate filter |
| Number of Poles | 2 -pin connector |
| Mounting Type | Bolted |
| Cable Length | 195 mm |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
Important compatibility info
| Placement on Vehicle | after soot particulate filter |
| Number of Poles | 2 -pin connector |
| Mounting Type | Bolted |
| Cable Length | 195 mm |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
Important compatibility info
| Placement on Vehicle | after soot particulate filter |
| Number of Poles | 2 -pin connector |
| Mounting Type | Bolted |
| Cable Length | 702 mm |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
Important compatibility info
| Placement on Vehicle | after soot particulate filter |
| Number of Poles | 2 -pin connector |
| Mounting Type | Bolted |
| Cable Length | 702 mm |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023













