Car Parts & Accessories by Hella
Hella is a global supplier of automotive components supplying both OE and the aftermarket with quality products. Important compatibility info
| Additional Information | with gasket/seal, with fuel sender unit |
| Number of Poles | 4 -pin connector |
| Operating Mode | Electric |
| Type | Fuel Feed Unit |
| Function | Fuel Feed Unit |
Important compatibility info
| Additional Information | with gasket/seal, with fuel sender unit |
| Number of Poles | 4 -pin connector |
| Operating Mode | Electric |
| Type | Fuel Feed Unit |
| Function | Fuel Feed Unit |
Important compatibility info
| Additional Information | without gasket/seal |
| Number of Poles | 5 -pin connector |
| Mounting Type | Pipe-neck |
| Type | Mass Air Flow Sensor |
| Function | Mass Air Flow Sensor |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
Important compatibility info
| Additional Information | without gasket/seal |
| Number of Poles | 5 -pin connector |
| Mounting Type | Pipe-neck |
| Type | Mass Air Flow Sensor |
| Function | Mass Air Flow Sensor |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
Important compatibility info
| Warranty | 4 Year Warranty |
| Width | 175 mm |
| Height | 190 mm |
| Hold-down Type | B13 |
| Terminal Type | 1 |
| Voltage | 12V |
| Ampere-Hours | 60Ah |
| Type | Lead Acid Battery |
| Other Part Number | 027 |
| Length | 243 mm |
| Cold Cranking Amperage (CCA) | 540 A |
| Terminal Layout | 0 |
| Battery Type Code | 027 |
Important compatibility info
| Warranty | 4 Year Warranty |
| Width | 175 mm |
| Height | 190 mm |
| Hold-down Type | B13 |
| Terminal Type | 1 |
| Voltage | 12V |
| Ampere-Hours | 60Ah |
| Type | Lead Acid Battery |
| Other Part Number | 027 |
| Length | 243 mm |
| Cold Cranking Amperage (CCA) | 540 A |
| Terminal Layout | 0 |
| Battery Type Code | 027 |
Important compatibility info
| Additional Information | with gasket/seal, with fuel sender unit |
| Function | Fuel Feed Unit |
| Type | Fuel Feed Unit |
| Operating Mode | Electric |
| Number of Poles | 4 -pin connector |
| Additional Information 2 | with pressure regulator |
Important compatibility info
| Additional Information | with gasket/seal, with fuel sender unit |
| Function | Fuel Feed Unit |
| Type | Fuel Feed Unit |
| Operating Mode | Electric |
| Number of Poles | 4 -pin connector |
| Additional Information 2 | with pressure regulator |
Important compatibility info
| Placement on Vehicle | Vehicle Front |
| Length | 98 mm |
| Height | 30 mm |
| Width | 98 mm |
| Voltage | 24 V |
| Bulb Type | LED |
| Light Function | with position light (LED) |
| Housing Colour | Black |
| Light Design | LED |
| Mounting Type | Fitting, Screw Connection |
| Quantity | 60 |
| Cable Length | 160 mm |
| Number of light functions | 1 |
| Lens Colour | Crystal clear |
| Registration Type | ECE approved |
| Plug Type | open cable ends |
| Power Consumption | 1.8 W |
| Number of LEDs | 12 |
| Type | Position Light |
| Fulfils ECE norm | R7 |
| Function | Position Light |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
Important compatibility info
| Temperature range to | +60 °C |
| Temperature range from | -40 °C |
| Weight | 890 g |
| Height | 194 mm |
| Additional Information | with bulb |
| Additional Information 2 | Electromagnetic Compatibility (EMC) |
| Voltage | 24 V |
| Bulb Type | H1 |
| Light Function | With rotating warning signal |
| Housing Colour | Yellow |
| Outer diameter 1 | 155 mm |
| Light Design | Halogen |
| Mounting Type | mounting, Bolted |
| Quantity | 1 |
| Lens Colour | yellow (amber) |
| Plug Type | Blade Terminal |
| Power Consumption | 70 W |
| Protection Type (IP Code) | IPX9K, IP5K4K |
| Type | Rotating Beacon |
| Diffusing Lens Material | PMMA (Polymethylmethacrylate) |
| Fulfils ECE norm | R65, R10 |
| Housing material | Plastic |
| Function | Rotating Beacon |
| Extra Description | KL 7000 |
| Rotating beacon RPM [1/min] | 192 1/min |
| Light colour | yellow (amber) |
Additional Information
- 1x Hella Lens, rotating beacon (9EL862141-001)
- 1x Hella Lens, rotating beacon (9EL862141-021)
- 1x Hella Timing Belt Kit (9XR854840-001)
- 1x Hella Electric Motor, rotating beacon (9MN862741-001)
- 1x Hella Reflector, rotating beacon (9DX862740-001)
- 1x Hella Bulb (8GH002089-251)
- 1x Hella Base, rotating beacon (9GD862164-001)
Important compatibility info
| Temperature range to | +60 °C |
| Temperature range from | -40 °C |
| Weight | 890 g |
| Height | 194 mm |
| Additional Information | with bulb |
| Additional Information 2 | Electromagnetic Compatibility (EMC) |
| Voltage | 24 V |
| Bulb Type | H1 |
| Light Function | With rotating warning signal |
| Housing Colour | Yellow |
| Outer diameter 1 | 155 mm |
| Light Design | Halogen |
| Mounting Type | mounting, Bolted |
| Quantity | 1 |
| Lens Colour | yellow (amber) |
| Plug Type | Blade Terminal |
| Power Consumption | 70 W |
| Protection Type (IP Code) | IPX9K, IP5K4K |
| Type | Rotating Beacon |
| Diffusing Lens Material | PMMA (Polymethylmethacrylate) |
| Fulfils ECE norm | R65, R10 |
| Housing material | Plastic |
| Function | Rotating Beacon |
| Extra Description | KL 7000 |
| Rotating beacon RPM [1/min] | 192 1/min |
| Light colour | yellow (amber) |
Additional Information
- 1x Hella Lens, rotating beacon (9EL862141-001)
- 1x Hella Lens, rotating beacon (9EL862141-021)
- 1x Hella Timing Belt Kit (9XR854840-001)
- 1x Hella Electric Motor, rotating beacon (9MN862741-001)
- 1x Hella Reflector, rotating beacon (9DX862740-001)
- 1x Hella Bulb (8GH002089-251)
- 1x Hella Base, rotating beacon (9GD862164-001)
Important compatibility info
| Additional Information 2 | with cable |
| Number of Poles | 3 -pin connector |
| Type | Rain Sensor |
| Function | Rain Sensor |
| Mounting Type | Clipped |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
Important compatibility info
| Additional Information 2 | with cable |
| Number of Poles | 3 -pin connector |
| Type | Rain Sensor |
| Function | Rain Sensor |
| Mounting Type | Clipped |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
Important compatibility info
| Type | Position Light |
| Fulfils ECE norm | R7 |
| Function | Position Light |
| Plug Type | open cable ends |
| Power Consumption | 1.8 W |
| Registration Type | ECE approved |
| Number of light functions | 1 |
| Lens Colour | Crystal clear |
| Cable Length | 160 mm |
| Quantity | 1 |
| Light Design | LED |
| Mounting Type | Fitting, Screw Connection |
| Housing Colour | Black |
| Voltage | 24 V |
| Bulb Type | LED |
| Width | 98 mm |
| Placement on Vehicle | Vehicle Front |
| Length | 98 mm |
| Height | 30 mm |
| Light Function | with position light (LED) |
| Number of LEDs | 12 |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
Important compatibility info
| Number of Poles | 3 -pin connector |
| Mounting Type | Clipped |
| Type | Rain Sensor |
| Function | Rain Sensor |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
Important compatibility info
| Number of Poles | 3 -pin connector |
| Mounting Type | Clipped |
| Type | Rain Sensor |
| Function | Rain Sensor |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
Important compatibility info
| Placement on Vehicle | Left |
| Additional Information 2 | with bulbs |
| Voltage | 12 V |
| Paired article numbers | 1NA 011 987-121 |
| Bulb Type | H8, P21W |
| Light Function | with cornering light, with daytime running light |
| Light Design | Bulb Technology |
| Number of light functions | 3 |
| Registration Type | ECE approved |
| Type | Front Fog Light |
| Function | Front Fog Light |
Additional Information
Brief Information
*** Original spare part
- 1x Hella Bulb (8GH008356-121)
- 1x Hella Bulb (8GA002073-271)
Important compatibility info
| Placement on Vehicle | Left |
| Additional Information 2 | with bulbs |
| Voltage | 12 V |
| Paired article numbers | 1NA 011 987-121 |
| Bulb Type | H8, P21W |
| Light Function | with cornering light, with daytime running light |
| Light Design | Bulb Technology |
| Number of light functions | 3 |
| Registration Type | ECE approved |
| Type | Front Fog Light |
| Function | Front Fog Light |
Additional Information
Brief Information
*** Original spare part
- 1x Hella Bulb (8GH008356-121)
- 1x Hella Bulb (8GA002073-271)
Important compatibility info
| Placement on Vehicle | Left |
| Length | 440 mm |
| Height | 82 mm |
| Additional Information 2 | without bulbs, for trailer |
| Voltage | 12 V. 24 V |
| Paired article numbers | 2VP 340 450-021 |
| Bulb Type | P21W, R5W, C5W |
| Light Function | with indicator, with stop light, with rear fog light, with reverse light, with taillight, with side marker light, with reflector (triangular) |
| Housing Colour | Black |
| Light Design | Bulb Technology |
| Mounting Type | Bolted, mounting |
| Quantity | 1 |
| Number of light functions | 6 |
| Housing Type | Synthetic Material Housing |
| Lens Colour | Multi-coloured |
| Registration Type | ECE approved, not SAE approved, ADR/GGVS approved |
| Fastening Type | for horizontal fastening |
| Plug Type | Blade Terminal |
| Protection Type (IP Code) | IP5K4K |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
Additional Information
- 1x Hella Lens, tail light assembly (9EL340208-001)
- 1x Hella Lens, side marker light (9EL146838-001)
Important compatibility info
| Placement on Vehicle | Left |
| Length | 440 mm |
| Height | 82 mm |
| Additional Information 2 | without bulbs, for trailer |
| Voltage | 12 V. 24 V |
| Paired article numbers | 2VP 340 450-021 |
| Bulb Type | P21W, R5W, C5W |
| Light Function | with indicator, with stop light, with rear fog light, with reverse light, with taillight, with side marker light, with reflector (triangular) |
| Housing Colour | Black |
| Light Design | Bulb Technology |
| Mounting Type | Bolted, mounting |
| Quantity | 1 |
| Number of light functions | 6 |
| Housing Type | Synthetic Material Housing |
| Lens Colour | Multi-coloured |
| Registration Type | ECE approved, not SAE approved, ADR/GGVS approved |
| Fastening Type | for horizontal fastening |
| Plug Type | Blade Terminal |
| Protection Type (IP Code) | IP5K4K |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
Additional Information
- 1x Hella Lens, tail light assembly (9EL340208-001)
- 1x Hella Lens, side marker light (9EL146838-001)
Important compatibility info
| Light Design | Bulb Technology |
| Paired article numbers | 2VA 010 110-051 |
| Voltage | 12 V |
| Placement on Vehicle | Right |
| Additional Information 2 | with bulbs |
| Bulb Type | P21/5W, P21W, PY21W |
| Light Function | with indicator, with stop light, with rear fog light, with reflector, with taillight |
| Number of light functions | 5 |
| Function | Tail Light Assembly |
| Type | Tail Light Assembly |
| Registration Type | ECE approved |
Additional Information
Brief Information
*** Original spare part
- 1x Hella Bulb, direction indicator (8GA006841-121)
- 1x Hella Bulb (8GD002078-121)
- 2x Hella Bulb (8GA002073-121)
Important compatibility info
| Light Design | Bulb Technology |
| Paired article numbers | 2VA 010 110-051 |
| Voltage | 12 V |
| Placement on Vehicle | Right |
| Additional Information 2 | with bulbs |
| Bulb Type | P21/5W, P21W, PY21W |
| Light Function | with indicator, with stop light, with rear fog light, with reflector, with taillight |
| Number of light functions | 5 |
| Function | Tail Light Assembly |
| Type | Tail Light Assembly |
| Registration Type | ECE approved |
Additional Information
Brief Information
*** Original spare part
- 1x Hella Bulb, direction indicator (8GA006841-121)
- 1x Hella Bulb (8GD002078-121)
- 2x Hella Bulb (8GA002073-121)
Important compatibility info
| Paired article numbers | 2VA 010 110-061 |
| Light Design | Bulb Technology |
| Placement on Vehicle | Left |
| Additional Information 2 | with bulbs |
| Bulb Type | P21/5W, P21W, PY21W |
| Light Function | with indicator, with stop light, with rear fog light, with reflector, with taillight |
| Number of light functions | 5 |
| Function | Tail Light Assembly |
| Type | Tail Light Assembly |
| Voltage | 12 V |
| Registration Type | ECE approved |
Additional Information
Brief Information
*** Original spare part
- 1x Hella Bulb, direction indicator (8GA006841-121)
- 1x Hella Bulb (8GD002078-121)
- 2x Hella Bulb (8GA002073-121)
Important compatibility info
| Paired article numbers | 2VA 010 110-061 |
| Light Design | Bulb Technology |
| Placement on Vehicle | Left |
| Additional Information 2 | with bulbs |
| Bulb Type | P21/5W, P21W, PY21W |
| Light Function | with indicator, with stop light, with rear fog light, with reflector, with taillight |
| Number of light functions | 5 |
| Function | Tail Light Assembly |
| Type | Tail Light Assembly |
| Voltage | 12 V |
| Registration Type | ECE approved |
Additional Information
Brief Information
*** Original spare part
- 1x Hella Bulb, direction indicator (8GA006841-121)
- 1x Hella Bulb (8GD002078-121)
- 2x Hella Bulb (8GA002073-121)
Important compatibility info
| Light Design | Bulb Technology |
| Light Function | with indicator, with stop light, with rear fog light, with reverse light, with taillight |
| Bulb Type | P21W, PY21W, R5W |
| Paired article numbers | 2SK 009 477-061 |
| Voltage | 12 V |
| Additional Information 2 | with bulbs |
| Registration Type | ECE approved, CCC approved |
| Additional Information | with bulb holder |
| Placement on Vehicle | Left |
| Function | Tail Light Assembly |
| Type | Tail Light Assembly |
| Indicator colour lens | White |
| Number of light functions | 5 |
| Lens Colour | Crystal clear, Red |
Additional Information
Brief Information
*** Original spare part
- 1x Hella Bulb, direction indicator (8GA006841-121)
- 1x Hella Bulb (8GA002071-121)
- 3x Hella Bulb (8GA002073-121)
Important compatibility info
| Light Design | Bulb Technology |
| Light Function | with indicator, with stop light, with rear fog light, with reverse light, with taillight |
| Bulb Type | P21W, PY21W, R5W |
| Paired article numbers | 2SK 009 477-061 |
| Voltage | 12 V |
| Additional Information 2 | with bulbs |
| Registration Type | ECE approved, CCC approved |
| Additional Information | with bulb holder |
| Placement on Vehicle | Left |
| Function | Tail Light Assembly |
| Type | Tail Light Assembly |
| Indicator colour lens | White |
| Number of light functions | 5 |
| Lens Colour | Crystal clear, Red |
Additional Information
Brief Information
*** Original spare part
- 1x Hella Bulb, direction indicator (8GA006841-121)
- 1x Hella Bulb (8GA002071-121)
- 3x Hella Bulb (8GA002073-121)
Important compatibility info
| Placement on Vehicle | Left |
| Length | 123 mm |
| Height | 53 mm |
| Voltage | 24 V |
| Paired article numbers | 2SD 964 169-421 |
| Bulb Type | LED |
| Light Function | with indicator (LED), with stop light (LED), with taillight (LED) |
| Housing Colour | Black |
| Light Design | LED |
| Mounting Type | Bolted, mounting |
| Quantity | 1 |
| Cable Length | 500 mm |
| Number of light functions | 3 |
| Housing Type | Synthetic Material Housing |
| Lens Colour | transparent |
| Registration Type | ECE approved, ADR/GGVS approved |
| Plug Type | open cable ends |
| Protection Type (IP Code) | IP5KX, IPX9K |
| Number of LEDs | 37 |
| LED Colour | yellow (amber), red |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
Additional Information
Technical Information
Regarding flasher lights with LEDs with passive electronics In connection with these low powers, which differ significan tly from those of a bulb-based version, problems arise with the indicator failure check during operation on various traction vehicles. The indicator failure check required by legislation in the a rea of validity of the ECE R48 regulation must be guaranteed by suitable measures within the vehicle. The customer is responsible for this. In addition, further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligati on to see for themselves that the lighting equipment is working. Here, too, faulty diagnosis can occur on account of the low power levels involved (instrument panel in the driver cab in dicates light failure although the function is working). Operation of the light with AC voltage or synchronised DC vo ltage is not permitted. The individual light functions may only be operated with a v ehicle fuse of max. 3A.
Important compatibility info
| Placement on Vehicle | Left |
| Length | 123 mm |
| Height | 53 mm |
| Voltage | 24 V |
| Paired article numbers | 2SD 964 169-421 |
| Bulb Type | LED |
| Light Function | with indicator (LED), with stop light (LED), with taillight (LED) |
| Housing Colour | Black |
| Light Design | LED |
| Mounting Type | Bolted, mounting |
| Quantity | 1 |
| Cable Length | 500 mm |
| Number of light functions | 3 |
| Housing Type | Synthetic Material Housing |
| Lens Colour | transparent |
| Registration Type | ECE approved, ADR/GGVS approved |
| Plug Type | open cable ends |
| Protection Type (IP Code) | IP5KX, IPX9K |
| Number of LEDs | 37 |
| LED Colour | yellow (amber), red |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
Additional Information
Technical Information
Regarding flasher lights with LEDs with passive electronics In connection with these low powers, which differ significan tly from those of a bulb-based version, problems arise with the indicator failure check during operation on various traction vehicles. The indicator failure check required by legislation in the a rea of validity of the ECE R48 regulation must be guaranteed by suitable measures within the vehicle. The customer is responsible for this. In addition, further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligati on to see for themselves that the lighting equipment is working. Here, too, faulty diagnosis can occur on account of the low power levels involved (instrument panel in the driver cab in dicates light failure although the function is working). Operation of the light with AC voltage or synchronised DC vo ltage is not permitted. The individual light functions may only be operated with a v ehicle fuse of max. 3A.
Important compatibility info
| Cold Cranking Amperage (CCA) | 540 A |
| Other Part Number | 075 |
| Voltage | 12V |
| Width | 175 mm |
| Warranty | 4 Year Warranty |
| Terminal Layout | 0 |
| Length | 243 mm |
| Height | 175 mm |
| Type | Lead Acid Battery |
| Terminal Type | 1 |
| Ampere-Hours | 60Ah |
| Hold-down Type | B13 |
| Battery Type Code | 075 |
Important compatibility info
| Cold Cranking Amperage (CCA) | 540 A |
| Other Part Number | 075 |
| Voltage | 12V |
| Width | 175 mm |
| Warranty | 4 Year Warranty |
| Terminal Layout | 0 |
| Length | 243 mm |
| Height | 175 mm |
| Type | Lead Acid Battery |
| Terminal Type | 1 |
| Ampere-Hours | 60Ah |
| Hold-down Type | B13 |
| Battery Type Code | 075 |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023















