Hose & Pipe by Pearl

• Pack of 10
• T Piece Push-Fit
• Constructed of plastic that will connect two hoses

• Has a temperature range of -40C to + 100C
• Made from black neoprene
• Vacuum hose 3/16in. 4mm

• 1m length with clips
• Made from PVC reinforced synthetic textile for leaded fuel use

• Fuel hose clear braided 3/16in. x 1m

• Straight Push-Fit
• Constructed of plastic that will connect two hoses

• Has a temperature range of -40C to + 100C
• Made from black neoprene
• Vacuum hose 3/16in. 4mm

• Straight Push-Fit
• Constructed of plastic that will connect two hoses

• Pack of 10
• Made from mild steel zinc plated
• Hose clip that is made from a band of metal passing through a worm drive, normally used for clamping hose from approximately 1/2in. upwards

• Pack of 10
• Made from mild steel zinc plated
• Hose clip that is made from a band of metal passing through a worm drive, normally used for clamping hose from approximately 1/2in. upwards

• Pack of 10
• Made from non-corrosive stainless steel
• Normally used for clamping hose from approximately 1/2in. upwards
• Hose clips made from a band of metal passing through a worm drive

• 1m length with clips
• Made from PVC reinforced synthetic textile for leaded fuel use

• Fuel hose clear braided 5/16in. x 1m

As part of their automotive spares and accessories range Pearl supply a range of replacement/spare hose clips suitable for automotive use. These heavy duty metal hose clips come as a pack of 10 size O 22mm hose clips. Each clip comes with a worm screw to seal the clip tightly into place.

Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from electricals and exhausts to workshop consumables.

• Pack of 10
• Made from mild steel zinc plated
• Hose clip that is made from a band of metal passing through a worm drive, normally used for clamping hose from approximately 1/2in. upwards

• 1m length with clips
• Suitable for use with leaded & unleaded petrol
• Made from NBR/ PVC/ CR classed as superior quality specific for unleaded injection systems.

• Fuel hose 1/4in. 6mm inside diameter x 1m including two clips

This roll of fuel hose from Pearl Automotive is a 3/16 inch hose with a 8mm internal diameter. It comes in a 1m roll made from NBR/CR suitable for leaded, unleaded and diesel fuels.

Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from electricals and exhausts to workshop consumables.

• 1m length with clips
• Suitable for use with leaded & unleaded petrol
• Made from NBR/ PVC/ CR classed as superior quality specific for unleaded injection systems.

• Fuel hose 3/16in. 5mm inside diameter x 1m including two clips

As part of their automotive spares and accessories range Pearl supply a range of replacement/spare hose clips suitable for automotive use. These stainless steel hose clips come as a pack of 10 size OO hose clips. Each clip comes with a worm screw to seal the clip tightly into place.

Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from electricals and exhausts to workshop consumables.

• Pack of 10
• Made from non-corrosive stainless steel
• Normally used for clamping hose from approximately 1/2in. upwards
• Hose clips made from a band of metal passing through a worm drive

As part of their automotive spares and accessories range Pearl supply a range of replacement/spare hose clips suitable for automotive use. These heavy duty metal hose clips come as a pack of 10 size O hose clips. Each clip comes with a worm screw to seal the clip tightly into place.

Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from steering and suspension, electricals and exhausts to workshop consumables.

• Pack of 10
• Made from mild steel zinc plated
• Hose clip that is made from a band of metal passing through a worm drive, normally used for clamping hose from approximately 1/2in. upwards

As part of their automotive spares and accessories range Pearl supply a range of replacement/spare hose clips suitable for automotive use. These heavy duty stainless steel hose clips come as a pack of 10 size O hose clips. Each clip comes with a worm screw to seal the clip tightly into place.

Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.

• Pack of 10
• Made from non-corrosive stainless steel
• Normally used for clamping hose from approximately 1/2in. upwards
• Hose clips made from a band of metal passing through a worm drive

As part of their automotive spares and accessories range Pearl supply a range of replacement/spare hose clips suitable for automotive use. These heavy duty metal hose clips are size OX. They also come stored in a handy clear plastic storage box.

Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.

• Pack of 10
• Made from non-corrosive stainless steel
• Normally used for clamping hose from approximately 1/2in. upwards
• Hose clips made from a band of metal passing through a worm drive

Pearl has established a reputation over the years for delivering high quality products. With recent expansions into a more diverse product portfolio of automotive products, its established Wot Nots' brand is still thriving. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.

• Pack of 10
• Made from mild steel zinc plated
• Hose clip that is made from a band of metal passing through a worm drive, normally used for clamping hose from approximately 1/2in. upwards

• Made from NBR /PVC with polyester outer suitable for leaded/unleaded and diesel engine non injection
• Supplied with two clips with an outer braided covering

• Fuel hose 3.2mm inside diameter x 1m including two clips

• Straight Push-Fit
• Constructed of plastic that will connect two hoses

As part of their automotive spares and accessories range Pearl supply a range of replacement/spare hose clips suitable for automotive use. These heavy duty metal hose clips come as a pack of 10, size 35mm. Each clip comes with a worm screw to seal the clip tightly into place.

Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.

• Pack of 10
• Made from mild steel zinc plated
• Hose clip that is made from a band of metal passing through a worm drive, normally used for clamping hose from approximately 1/2in. upwards

These diesel spill off pipe plugs are great for car maintenance. They come in a bulk pack of 20 and are made from diesel resistant rubber.

Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.

• Made from diesel resistant rubber
• Bulk pack of 20
• Diesel spill of plugs

This servo/air brake hose from Pearl Automotive is 3/8inch with an inside diameter of 1m. It has a working pressure bar of 10 and a burst pressure bar of 62.

Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.

• Includes clips
• Working pressure bar of 10 and a burst pressure bar of 62
• Inside diameter x 1m
• Servo air hose 3/8in. 10mm

As part of their automotive spares and accessories range Pearl supply a range of replacement/spare hose clips suitable for automotive use. These stainless steel hose clips come as a pack of 10 size 1a hose clips. Each clip comes with a worm screw to seal the clip tightly into place.

Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.

• Pack of 10
• Made from non-corrosive stainless steel
• Normally used for clamping hose from approximately 1/2in. upwards
• Hose clips made from a band of metal passing through a worm drive

As part of their automotive spares and accessories range Pearl supply a range of replacement/spare hose clips suitable for automotive use. These stainless steel hose clips come as a pack of 10 size 1X. Each clip comes with a worm screw to seal the clip tightly into place.

Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.

• Pack of 10
• Made from non-corrosive stainless steel
• Normally used for clamping hose from approximately 1/2in. upwards
• Hose clips made from a band of metal passing through a worm drive

As part of their automotive spares and accessories range Pearl supply a range of replacement/spare hose clips suitable for automotive use. These heavy duty metal hose clips are 40mm in size. They also come stored in a handy clear plastic storage box.

Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.

• Pack of 10
• Made from mild steel zinc plated
• Hose clip that is made from a band of metal passing through a worm drive, normally used for clamping hose from approximately 1/2in. upwards

As part of their automotive spares and accessories range Pearl supply a range of replacement/spare hose clips suitable for automotive use. These stainless steel hose clips come as a pack of 10 size 1 hose clips. Each clip comes with a worm screw to seal the clip tightly into place.

Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from electricals and exhausts to workshop consumables.

• Pack of 10
• Made from non-corrosive stainless steel
• Normally used for clamping hose from approximately 1/2in. upwards
• Hose clips made from a band of metal passing through a worm drive

This length of heater hose from Pearl Automotive is 1/2 inch hose. It comes in a 1m length made from MBR.CR rubber which is suitable for use with vehicle heater systems.

Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.

• Black EPDM Resistant to Weather Ozone
• Suitable for automotive heating systems with a temperature range of -40 Deg C to + 110 Deg C

• Heater hose & clips 1/2in. x 1m Made from EPDM rubber

This fuel hose from Pearl Automotive is 1 metre in length and has an internal diameter of 5.5mm. It is made from NBR /PVC with a polyester outer suitable for leaded, unleaded and diesel fuels.

Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.

• Made from NBR /PVC with polyester outer suitable for leaded/unleaded and diesel engine non injection
• Supplied with two clips with an outer braided covering

• Fuel hose 5.5mm inside diameter 1m

As part of their automotive spares and accessories range Pearl supply a range of replacement/spare hose clips suitable for automotive use. These stainless steel hose clips come as a pack of 10 size 2A hose clips. Each clip comes with a worm screw to seal the clip tightly into place.

Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.

• Pack of 10
• Made from non-corrosive stainless steel
• Normally used for clamping hose from approximately 1/2in. upwards
• Hose clips made from a band of metal passing through a worm drive