• Fits hole 12.5mm
• 12V 16A
• On/Off rectangular switch standard round hole

• 12 Volt
• Grey, Pink, Tan, Brown
• Classed as mini with a width of 11mm 2A, 4A, 5A and 7.5A
• Constructed of plastic and metal with two blades protruding from its plastic housing, classed as mini with a width of 11mm

• 12 Volt
• Red, Blue, Yellow, Green
• Classed as mini with a width of 11mm 10A, 15A, 20A and 30A
• Constructed of plastic and metal with two blades protruding from its plastic housing, classed as mini with a size width of 11mm

• There are many types of key blades however typically automotive manufactures will use the same blade profile across large parts of their vehicle range.
• Key blades are the metal part of the key that is cut specifically to each car.
• This item is non-returnable once cut

• This blade is suitable for Jaguar OE flip remotes only

• There are many types of key blades however typically automotive manufactures will use the same blade profile across large parts of their vehicle range.
• Key blades are the metal part of the key that is cut specifically to each car.
• This item is non-returnable once cut

• This blade is suitable for Toyota OE flip remotes only.

• There are many types of key blades however typically automotive manufactures will use the same blade profile across large parts of their vehicle range.
• Key blades are the metal part of the key that is cut specifically to each car.
• This item is non-returnable once cut
• The side grooves required for some vehicles are already cut into these blades.

• They can either be built onto the PCB (On-Board) or housed separately in the key (Off-Board).
• This transponder is also suitable for generation into other PCF7936 transponder types. We have gained knowledge that if you are programming a vehicle such as a Fiat 500 or Ford KA the aftermarket ID46 transponders may not program. You will need to use a
• Transponder chips are the part of the key that connect with the immobiliser and are often either carbon or glass.
• Reference: T14 PCF7936 ID46
• Transponder Type: Carbon
• Transponder chips work by forming a ‘handshake’ between the vehicle key and the vehicle itself via an aerial near the ignition barrel.
• Programming: Diagnostically or EEPROM

• They can either be built onto the PCB (On-Board) or housed separately in the key (Off-Board).
• This transponder is suitable for programming into other ID48 chip types.
• Transponder chips are the part of the key that connect with the immobiliser and are often either carbon or glass.
• Programming: Diagnostically or EEPROM
• Reference: ID48 T6
• Transponder Type: Glass
• Transponder chips work by forming a ‘handshake’ between the vehicle key and the vehicle itself via an aerial near the ignition barrel.

• Reliable and strong
• Perforated band design
• Convenient pack size
• Bright zinc plated for extra protection
• Quality product

• Quality product made from Bright Zinc Plated mild steel

• High quality hot-forging process provides a performance
• Short beam excels for use in limited space applications
• High visibility colour filled size mark for easy identification during use
• Mirrior Polish Finish
• 15 degree offset box end

• ASME Compliant

• Radius corner on working end provides higher torque and better gripping of fastener
• Chamfered drive opening allows a quicker connection between socket and fastener
• Mirror polish chrome-plated finish prevents rust
• Knurled teeth on bottom of socket improve grip when handling
• Radius Corner Design
• Chrome Vanadium Alloy Steel
• Chamfered Drive Opening

• Chrome Vanadium Alloy Steel

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Technical Information

Please tighten the mounting bolts with the wheels on the ground.

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Technical Information

Please tighten the mounting bolts with the wheels on the ground.

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Warranty period - 1 year
• E marked for legal use on UK roads
• Manufactured to OE specification
• Direct replacement bulb
• Single box

• Warranty period - 1 year
• E marked for legal use on UK roads
• Manufactured to OE specification
• Direct replacement bulb
• Single box