Important compatibility info
| Type | Centre Rod Assembly |
| Pipe Diameter | 42 mm |
| Thread Measurement 1 | M30X1.5 RHT |
| Function | Centre Rod Assembly |
| Rod/Strut | Push Rod |
| Thread Measurement 2 | M24X1.5 |
| Length | 855 mm |
Important compatibility info
| Function | Centre Rod Assembly |
| Type | Centre Rod Assembly |
| Pipe Diameter | 52 mm |
| for OE number | 1075005 |
| Rod/Strut | Push Rod |
| Thread Measurement 2 | M30X1.5 |
| Thread Measurement 1 | M20X1.5 |
| Length | 800 mm |
Important compatibility info
| Recommended additional repairs | Air Filter |
| Type | Mass Air Flow Sensor |
| Function | Mass Air Flow Sensor |
| Replaces | 0280218062 |
Important compatibility info
| Recommended additional repairs | Air Filter |
| Type | Mass Air Flow Sensor |
| Function | Mass Air Flow Sensor |
| Replaces | 0280218062 |
Important compatibility info
| Title | 95mm 1Drive Impact Hub Socket |
Additional Information
- BPW 6.5 9 tons
- Overall length: 70mm
- Size: 3/4in.Drive x 95mm (oval)
- Designed for extracting the rear axle cover
Important compatibility info
| Weight | 1819 g |
| Height | 339 mm |
| Width | 546 mm |
| Thickness | 16 mm |
| Additional Information 2 | with dryer |
| Core Dimensions | 546x339x16 |
| for OE number | 8846052110 |
| Refrigerant | R 134a |
| Type | Condenser, air conditioning |
| Function | Condenser, air conditioning |
| Gross Weight | 2819 g |
| alternative item | - |
Important compatibility info
| Weight | 1819 g |
| Height | 339 mm |
| Width | 546 mm |
| Thickness | 16 mm |
| Additional Information 2 | with dryer |
| Core Dimensions | 546x339x16 |
| for OE number | 8846052110 |
| Refrigerant | R 134a |
| Type | Condenser, air conditioning |
| Function | Condenser, air conditioning |
| Gross Weight | 2819 g |
| alternative item | - |
Important compatibility info
| Extra Description | Direct fit air fuel ratio sensor |
| Function | Oxygen Sensor |
| Cable Length | 300 mm |
| Number of Poles | 4 -pin connector |
| Weight | 95 g |
| Quality | OE |
| Lambda Sensor | Heated, Finger-type Sensor, Broadband Oxygen Sensor, Thread pre-greased |
| Type | Oxygen Sensor |
| Manufacturer Restriction | DENSO |
| Placement on Vehicle | Right, Left |
| for OE number | C2C29250 |
| Thread Size | M18x1.5 |
| Gross Weight | 128 g |
Important compatibility info
| Extra Description | Direct fit air fuel ratio sensor |
| Function | Oxygen Sensor |
| Cable Length | 300 mm |
| Number of Poles | 4 -pin connector |
| Weight | 95 g |
| Quality | OE |
| Lambda Sensor | Heated, Finger-type Sensor, Broadband Oxygen Sensor, Thread pre-greased |
| Type | Oxygen Sensor |
| Manufacturer Restriction | DENSO |
| Placement on Vehicle | Right, Left |
| for OE number | C2C29250 |
| Thread Size | M18x1.5 |
| Gross Weight | 128 g |
Important compatibility info
| Placement on Vehicle | Front |
| Type | Exhaust Pipe |
| Function | Exhaust Pipe |
Additional Information
Important compatibility info
| Placement on Vehicle | Front |
| Type | Exhaust Pipe |
| Function | Exhaust Pipe |
Additional Information
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 122 mm |
| Thickness | 61 mm |
| Inner diameter | 40 mm |
| Bolt Hole Circle Diameter | 95 mm |
| Function | Wheel Hub |
| Type | Wheel Hub |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 122 mm |
| Thickness | 61 mm |
| Inner diameter | 40 mm |
| Bolt Hole Circle Diameter | 95 mm |
| Function | Wheel Hub |
| Type | Wheel Hub |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Paired article numbers | 39944 |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Material | Sheet Steel |
| Placement on Vehicle | Front Axle Left, Lower |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with holder |
| Additional Information 2 | with ball joint, with bearing |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Paired article numbers | 39944 |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Material | Sheet Steel |
| Placement on Vehicle | Front Axle Left, Lower |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with holder |
| Additional Information 2 | with ball joint, with bearing |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 39943 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with holder |
| Additional Information 2 | with bearing, with ball joint |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 39943 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with holder |
| Additional Information 2 | with bearing, with ball joint |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Right |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA7153 |
Important compatibility info
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Right |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA7153 |
Important compatibility info
| Function | Cable Pull, manual transmission |
| Length 1 | 1200 mm |
| Type | Cable Pull, manual transmission |
Important compatibility info
| Function | Cable Pull, manual transmission |
| Length 1 | 1200 mm |
| Type | Cable Pull, manual transmission |
Important compatibility info
| Function | Cable Pull, manual transmission |
| Length 1 | 1400 mm |
| Type | Cable Pull, manual transmission |
Important compatibility info
| Function | Cable Pull, manual transmission |
| Length 1 | 1400 mm |
| Type | Cable Pull, manual transmission |
Important compatibility info
| Additional Information | with gaskets/seals |
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
Important compatibility info
| Additional Information | with gaskets/seals |
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
Important compatibility info
| Function | Water Pump, engine cooling |
| Impeller Diameter | 76 mm |
| Number of Ribs | 5 |
| Water Pump Pulley Diameter | 130 mm |
| Type | Water Pump, engine cooling |
Important compatibility info
| Function | Water Pump, engine cooling |
| Impeller Diameter | 76 mm |
| Number of Ribs | 5 |
| Water Pump Pulley Diameter | 130 mm |
| Type | Water Pump, engine cooling |
Important compatibility info
| Function | Auxiliary water pump (cooling water circuit) |
| Type | Auxiliary water pump (cooling water circuit) |
| Voltage | 12 V |
| Port / Connector type | 3 PIN |
| Connector Shape | Oval |
Important compatibility info
| Function | Auxiliary water pump (cooling water circuit) |
| Type | Auxiliary water pump (cooling water circuit) |
| Voltage | 12 V |
| Port / Connector type | 3 PIN |
| Connector Shape | Oval |
Important compatibility info
| Function | V-Ribbed Belt Set |
| Extra Description | Micro-V® |
| Type | V-Ribbed Belt Set |
Additional Information
- 1x Gates V-Ribbed Belt (7PK1165)
- 1x Gates Deflection/Guide Pulley, v-ribbed belt (T36608)
Important compatibility info
| Function | V-Ribbed Belt Set |
| Extra Description | Micro-V® |
| Type | V-Ribbed Belt Set |
Additional Information
- 1x Gates V-Ribbed Belt (7PK1165)
- 1x Gates Deflection/Guide Pulley, v-ribbed belt (T36608)
Important compatibility info
| Net weight | 1.284 kg |
| Function | EGR Valve |
| Connector Shape | D Shape |
| Operating Mode | Electric |
| Number of Poles | 2 -pin connector |
| Material | Metal |
| Weight | 1.360 kg |
| Additional Information | with gaskets/seals |
| Type | EGR Valve |
Important compatibility info
| Net weight | 1.284 kg |
| Function | EGR Valve |
| Connector Shape | D Shape |
| Operating Mode | Electric |
| Number of Poles | 2 -pin connector |
| Material | Metal |
| Weight | 1.360 kg |
| Additional Information | with gaskets/seals |
| Type | EGR Valve |
Important compatibility info
| Placement on Vehicle | Front Axle |
| Height | 49 mm |
| Outer diameter | 296 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 25 mm |
| Bolt Hole Circle Diameter | 114 mm |
| Centering Diameter | 62 mm |
| Paired article numbers | JCP8151, NKF8683 |
| Surface | Coated |
| Brake Type | Disc Brake |
| Weight | 8.400 kg |
| Number of mounting bores | 5 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | Vented |
Important compatibility info
| Placement on Vehicle | Front Axle |
| Height | 49 mm |
| Outer diameter | 296 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 25 mm |
| Bolt Hole Circle Diameter | 114 mm |
| Centering Diameter | 62 mm |
| Paired article numbers | JCP8151, NKF8683 |
| Surface | Coated |
| Brake Type | Disc Brake |
| Weight | 8.400 kg |
| Number of mounting bores | 5 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | Vented |
Important compatibility info
| Net weight | 1.284 kg |
| Extra Description | Kerr Nelson |
| Function | EGR Valve |
| Connector Shape | Oval |
| Operating Mode | Electric |
| Number of Poles | 2 -pin connector |
| Material | Metal |
| Additional Information | without gasket / seal |
| Weight | 1.360 kg |
| Type | EGR Valve |
Important compatibility info
| Net weight | 1.284 kg |
| Extra Description | Kerr Nelson |
| Function | EGR Valve |
| Connector Shape | Oval |
| Operating Mode | Electric |
| Number of Poles | 2 -pin connector |
| Material | Metal |
| Additional Information | without gasket / seal |
| Weight | 1.360 kg |
| Type | EGR Valve |
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 10 |
| Rated Power | 1 kW |
| Type | Starter |
| Manufacturer Restriction | Denso |
| Function | Starter |
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 10 |
| Rated Power | 1 kW |
| Type | Starter |
| Manufacturer Restriction | Denso |
| Function | Starter |
Important compatibility info
| Additional Information 2 | with radiator fan shroud |
| Voltage | 12 V |
| Type | Fan, engine cooling |
| Function | Fan, engine cooling |
Important compatibility info
| Additional Information 2 | with radiator fan shroud |
| Voltage | 12 V |
| Type | Fan, engine cooling |
| Function | Fan, engine cooling |
Important compatibility info
| Extra Description | 2-1 Kit |
| Number of Teeth | 23 |
| Additional Information | without central slave cylinder |
| Hub Profile | 23.3x26.3 |
| Function | Clutch Kit |
| Friction Lining Outer Diameter | 240 mm |
| Type | Clutch Kit |
Important compatibility info
| Extra Description | 2-1 Kit |
| Number of Teeth | 23 |
| Additional Information | without central slave cylinder |
| Hub Profile | 23.3x26.3 |
| Function | Clutch Kit |
| Friction Lining Outer Diameter | 240 mm |
| Type | Clutch Kit |
Important compatibility info
| Width | 21 mm |
| Diameter | 95 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Type | Deflection/Guide Pulley, v-ribbed belt |
Important compatibility info
| Width | 21 mm |
| Diameter | 95 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Type | Deflection/Guide Pulley, v-ribbed belt |
Important compatibility info
| Type | Alternator |
| Manufacturer Restriction | Valeo |
| Alternator Charge Current | 70 A |
| Number of Ribs | 4 |
| Voltage | 12 V |
| Pulleys | without belt pulley |
| Function | Alternator |
| Manufacturer | CITROEN PEUGEOT TALBOT |
Important compatibility info
| Type | Alternator |
| Manufacturer Restriction | Valeo |
| Alternator Charge Current | 70 A |
| Number of Ribs | 4 |
| Voltage | 12 V |
| Pulleys | without belt pulley |
| Function | Alternator |
| Manufacturer | CITROEN PEUGEOT TALBOT |
Important compatibility info
| Rotation Direction | Clockwise rotation |
| Rated Power | 1.2 kW |
| Number of mounting bores | 2 |
| Type | Starter |
| Manufacturer Restriction | Bosch |
| Function | Starter |
| Number of Teeth | 9 |
| Number of Thread Bores | 1 |
| Voltage | 12 V |
| Manufacturer | BMW |
| Model | 116 118 120 318 320 Z4 |
Important compatibility info
| Rotation Direction | Clockwise rotation |
| Rated Power | 1.2 kW |
| Number of mounting bores | 2 |
| Type | Starter |
| Manufacturer Restriction | Bosch |
| Function | Starter |
| Number of Teeth | 9 |
| Number of Thread Bores | 1 |
| Voltage | 12 V |
| Manufacturer | BMW |
| Model | 116 118 120 318 320 Z4 |
Important compatibility info
| Number of mounting bores | 2 |
| Number of Teeth | 13 |
| Rated Power | 1.2 kW |
| Rotation Direction | Anticlockwise rotation |
| Function | Starter |
| Manufacturer Restriction | Denso |
| Type | Starter |
| Voltage | 12 V |
| Manufacturer | TOYOTA |
| Model | AVENSIS CAMRY RAV4 |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023


























