Important compatibility info
| Connector Shape | Rectangular |
| Number of Poles | 8 -pin connector |
| Function | Throttle body |
| Type | Throttle body |
Important compatibility info
| Function | Water Pump & Timing Belt Kit |
| Additional Information | with water pump |
| Extra Description | PowerGrip™ |
| Type | Water Pump & Timing Belt Kit |
Additional Information
- 1x Gates Timing Belt (5683XS)
- 1x Gates Water Pump, engine cooling (WP0155)
Important compatibility info
| Function | Water Pump & Timing Belt Kit |
| Additional Information | with water pump |
| Extra Description | PowerGrip™ |
| Type | Water Pump & Timing Belt Kit |
Additional Information
- 1x Gates Timing Belt (5683XS)
- 1x Gates Water Pump, engine cooling (WP0155)
Important compatibility info
| Cable Length | 515 mm |
| Lambda Sensor | Broadband Oxygen Sensor |
| Net weight | 0.112 kg |
| Number of Poles | 5 -pin connector |
| Weight | 0.136 kg |
| Extra Description | Lucas Premium Blade |
| Function | Oxygen Sensor |
| Type | Oxygen Sensor |
Important compatibility info
| Cable Length | 515 mm |
| Lambda Sensor | Broadband Oxygen Sensor |
| Net weight | 0.112 kg |
| Number of Poles | 5 -pin connector |
| Weight | 0.136 kg |
| Extra Description | Lucas Premium Blade |
| Function | Oxygen Sensor |
| Type | Oxygen Sensor |
Important compatibility info
| External Teeth, Diff.Side | 26 |
| Function | Drive Shaft |
| Transmission Type | Electrical transmission |
| External Teeth, Wheel Side | 27 |
| Length | 680 mm |
| Type | Drive Shaft |
| Placement on Vehicle | Front Axle Left |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1268)
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1269)
Important compatibility info
| External Teeth, Diff.Side | 26 |
| Function | Drive Shaft |
| Transmission Type | Electrical transmission |
| External Teeth, Wheel Side | 27 |
| Length | 680 mm |
| Type | Drive Shaft |
| Placement on Vehicle | Front Axle Left |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1268)
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1269)
Important compatibility info
| Centering Diameter | 91 mm |
| Type | Brake Disc Rotor |
| Outer diameter | 305 mm |
| Minimum thickness | 10 mm |
| Bolt Hole Circle Diameter | 130 mm |
| Number of Holes | 5 |
| Height | 71.5 mm |
| Placement on Vehicle | Rear Axle |
| Brake Disc Thickness | 12 mm |
| Machining | Alloyed/High-carbon |
| Surface | Oiled |
| Rotor Style | Solid |
| Drill Diameter, up to | 17 mm |
| Function | Brake Disc |
| Fulfils ECE norm | ECE-R90 |
Important compatibility info
| Centering Diameter | 91 mm |
| Type | Brake Disc Rotor |
| Outer diameter | 305 mm |
| Minimum thickness | 10 mm |
| Bolt Hole Circle Diameter | 130 mm |
| Number of Holes | 5 |
| Height | 71.5 mm |
| Placement on Vehicle | Rear Axle |
| Brake Disc Thickness | 12 mm |
| Machining | Alloyed/High-carbon |
| Surface | Oiled |
| Rotor Style | Solid |
| Drill Diameter, up to | 17 mm |
| Function | Brake Disc |
| Fulfils ECE norm | ECE-R90 |
Important compatibility info
| Placement on Vehicle | Front Axle |
| Centering Diameter | 55 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Minimum thickness | 20 mm |
| Extra Description | PRIME LINE - UV Coated |
| Function | Brake Disc |
| Rotor Style | internally vented |
| Number of Holes | 4 |
| Brake Disc Thickness | 22 mm |
| Outer diameter | 258 mm |
| Height | 44 mm |
Important compatibility info
| Placement on Vehicle | Front Axle |
| Centering Diameter | 55 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Minimum thickness | 20 mm |
| Extra Description | PRIME LINE - UV Coated |
| Function | Brake Disc |
| Rotor Style | internally vented |
| Number of Holes | 4 |
| Brake Disc Thickness | 22 mm |
| Outer diameter | 258 mm |
| Height | 44 mm |
Important compatibility info
| Type | Catalytic Converter |
| Function | Catalytic Converter |
| Labels & Certifications | Euro 3 |
Additional Information
Important compatibility info
| Type | Catalytic Converter |
| Function | Catalytic Converter |
| Labels & Certifications | Euro 3 |
Additional Information
Important compatibility info
| Labels & Certifications | Euro 4 |
| Function | Catalytic Converter |
| Type | Catalytic Converter |
Additional Information
Important compatibility info
| Labels & Certifications | Euro 4 |
| Function | Catalytic Converter |
| Type | Catalytic Converter |
Additional Information
Important compatibility info
| Function | Catalytic Converter |
| Labels & Certifications | Euro 4 |
| Type | Catalytic Converter |
Additional Information
Important compatibility info
| Function | Catalytic Converter |
| Labels & Certifications | Euro 4 |
| Type | Catalytic Converter |
Additional Information
Important compatibility info
| Driver Position | for right-hand drive vehicles |
| Placement on Vehicle | Right |
| Function | Front Cover Lock |
| Type | Front Cover Lock |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Front Cover Lock |
| Type | Front Cover Lock |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Idle Control Valve, air supply |
| Valve type | Auxiliary Air Valve |
| Operating Mode | Electric |
| Number of Poles | 2 -pin connector |
| Weight | 0.34 kg |
| Type | Idle Control Valve, air supply |
| Net weight | 0.296 kg |
Important compatibility info
| Function | Idle Control Valve, air supply |
| Valve type | Auxiliary Air Valve |
| Operating Mode | Electric |
| Number of Poles | 2 -pin connector |
| Weight | 0.34 kg |
| Type | Idle Control Valve, air supply |
| Net weight | 0.296 kg |
Important compatibility info
| Net weight | 1.466 kg |
| Cooling Type | Water-cooled |
| Operating Mode | Mechanical |
| Additional Information | without gasket/seal |
| Material | Metal |
| Function | Cooler, exhaust gas recirculation |
| Weight | 1.724 kg |
| Type | Cooler, exhaust gas recirculation |
Important compatibility info
| Net weight | 1.466 kg |
| Cooling Type | Water-cooled |
| Operating Mode | Mechanical |
| Additional Information | without gasket/seal |
| Material | Metal |
| Function | Cooler, exhaust gas recirculation |
| Weight | 1.724 kg |
| Type | Cooler, exhaust gas recirculation |
Important compatibility info
| Weight | 0.34 kg |
| Extra Description | Kerr Nelson |
| Function | Idle Control Valve, air supply |
| Valve type | Auxiliary Air Valve |
| Operating Mode | Electric |
| Number of Poles | 2 -pin connector |
| Type | Idle Control Valve, air supply |
Important compatibility info
| Weight | 0.34 kg |
| Extra Description | Kerr Nelson |
| Function | Idle Control Valve, air supply |
| Valve type | Auxiliary Air Valve |
| Operating Mode | Electric |
| Number of Poles | 2 -pin connector |
| Type | Idle Control Valve, air supply |
Important compatibility info
| Net weight | 0.026 kg |
| Function | Injector Nozzle |
| Connector Shape | Rectangular |
| Housing Colour | Black |
| Colour | Black |
| Number of Poles | 2 -pin connector |
| Weight | 0.150 kg |
| Type | Injector Nozzle |
| Extra Description | Lucas Premium Blade |
Important compatibility info
| Net weight | 0.026 kg |
| Function | Injector Nozzle |
| Connector Shape | Rectangular |
| Housing Colour | Black |
| Colour | Black |
| Number of Poles | 2 -pin connector |
| Weight | 0.150 kg |
| Type | Injector Nozzle |
| Extra Description | Lucas Premium Blade |
Important compatibility info
| Number of mounting bores | 2 |
| Type | Starter |
| Function | Starter |
| Rated Power | 1.7 kW |
| Voltage | 12 V |
| Number of Teeth | 12 |
Important compatibility info
| Number of mounting bores | 2 |
| Type | Starter |
| Function | Starter |
| Rated Power | 1.7 kW |
| Voltage | 12 V |
| Number of Teeth | 12 |
Important compatibility info
| Length | 465 mm |
| Width | 148 mm |
| Function | Mounting Tool, bellow |
| Weight | 2 kg |
| Extra Description | Duraboot |
| Type | Mounting Tool, bellow |
Additional Information
Safety information
Safety First Read the operating and safety instruction. Follow them carefully. Maximum safe operating pressure 9 bar (125 psi). Air lines are dangerous - use them correctly Putting into service Before use check cap-retaining screws are secure.If the Air tool is dropped check for cracked components. Check air line pressure before connecting the Air tool.The Air tool should be used only by people trained in the use of pneumatically operated tools. Use Keep hands away from moving parts. Never operate the Air tool near the face or body. Only use Air tool to fit CV boots. If air line pressure exceeds 9 bar fit a regulator. Disconnect the Air tool from the air supply after use.
Installation Information
Operation: 1. Slide boot onto arms, large end first. The arms should just protrude from the small end of the boot. To fit a boot to an inner joint, turn the boot inside out before sliding i onto the Airtools´s arm. 2. Press " + " button until arms open enough to pass over the joint. Keep hands clear of moving parts. The air line can now be disconnected. The arms will remain open until the " - " button is pressed. 3. Place Airtool over CV joint and press release button (" -"). Keep hands away from moving parts. 4. Withdraw the Airtool, leaving the boot in position. Complete the installation in the normal way.
Important compatibility info
| Flange Diameter | 74 mm |
| Starter Type | Self-supporting |
| Function | Starter |
| Type | Starter |
| Rated Power | 2 kW |
| Rotation Direction | Clockwise rotation |
| Number of Teeth | 9 |
| Voltage | 12 V |
| Number of mounting bores | 2 |
Important compatibility info
| Flange Diameter | 74 mm |
| Starter Type | Self-supporting |
| Function | Starter |
| Type | Starter |
| Rated Power | 2 kW |
| Rotation Direction | Clockwise rotation |
| Number of Teeth | 9 |
| Voltage | 12 V |
| Number of mounting bores | 2 |
Important compatibility info
| Steering arm type | Control Arm |
| Additional Information 2 | with rubber mount, with ball joint |
| Placement on Vehicle | Front Axle Left |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | QSA1568S |
| Cone Size | 18 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Length | 430 mm |
| Width | 85 mm |
| Thread Size | M8x1,25 |
Important compatibility info
| Steering arm type | Control Arm |
| Additional Information 2 | with rubber mount, with ball joint |
| Placement on Vehicle | Front Axle Left |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | QSA1568S |
| Cone Size | 18 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Length | 430 mm |
| Width | 85 mm |
| Thread Size | M8x1,25 |
Important compatibility info
| Function | Window Regulator |
| Combi Switch Function | with comfort function |
| Operating Mode | Electric |
| Placement on Vehicle | Left Rear |
| Voltage | 12 V |
| Type | Window Regulator |
| Additional Information | without electric motor |
Important compatibility info
| Function | Window Regulator |
| Combi Switch Function | with comfort function |
| Operating Mode | Electric |
| Placement on Vehicle | Left Rear |
| Voltage | 12 V |
| Type | Window Regulator |
| Additional Information | without electric motor |
Important compatibility info
| Recommended additional repairs | Air Filter |
| Function | Mass Air Flow Sensor |
| Type | Mass Air Flow Sensor |
Important compatibility info
| Recommended additional repairs | Air Filter |
| Function | Mass Air Flow Sensor |
| Type | Mass Air Flow Sensor |
Important compatibility info
| Recommended additional repairs | Air Filter |
| Function | Mass Air Flow Sensor |
| Type | Mass Air Flow Sensor |
| Replaces | 0281002586 |
Important compatibility info
| Recommended additional repairs | Air Filter |
| Function | Mass Air Flow Sensor |
| Type | Mass Air Flow Sensor |
| Replaces | 0281002586 |
Important compatibility info
| Type | Sensor, exhaust gas temperature |
| Thread Size | M14 x 1.5 |
| Function | Sensor, exhaust gas temperature |
| Number of Poles | 3 -pin connector |
| Spanner Size | 17 |
| Weight | 0.113 kg |
| Housing Colour | brown |
| Connector Shape | rectangular |
| Fitting Depth | 15 mm |
| Cable Length | 935 mm |
| Angle | 45 ° |
| Net weight | 0.090 kg |
Important compatibility info
| Type | Sensor, exhaust gas temperature |
| Thread Size | M14 x 1.5 |
| Function | Sensor, exhaust gas temperature |
| Number of Poles | 3 -pin connector |
| Spanner Size | 17 |
| Weight | 0.113 kg |
| Housing Colour | brown |
| Connector Shape | rectangular |
| Fitting Depth | 15 mm |
| Cable Length | 935 mm |
| Angle | 45 ° |
| Net weight | 0.090 kg |
Important compatibility info
| Shock Absorber Mounting Type | Top pin |
| Placement on Vehicle | Front Axle |
| Function | Shock Absorber |
| Type | Shock Absorber |
| Extra Description | Excel-G |
| Shock Absorber Design | Suspension Strut |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Type | Gas Pressure |
Important compatibility info
| Shock Absorber Mounting Type | Top pin |
| Placement on Vehicle | Front Axle |
| Function | Shock Absorber |
| Type | Shock Absorber |
| Extra Description | Excel-G |
| Shock Absorber Design | Suspension Strut |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Type | Gas Pressure |
Important compatibility info
| Type | Clutch Kit |
| Function | Clutch Kit |
| Diameter | 200 mm |
| Additional Information | with central slave cylinder |
Important compatibility info
| Type | Clutch Kit |
| Function | Clutch Kit |
| Diameter | 200 mm |
| Additional Information | with central slave cylinder |
Important compatibility info
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Width 1 | 87 mm |
| Manufacturer | JAGUAR |
| Model | XF XJ XK XK8 XKR |
| Placement on Vehicle | Front Axle |
| Outer diameter 1 | 139 mm |
Important compatibility info
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Width 1 | 87 mm |
| Manufacturer | JAGUAR |
| Model | XF XJ XK XK8 XKR |
| Placement on Vehicle | Front Axle |
| Outer diameter 1 | 139 mm |
Important compatibility info
| Placement on Vehicle | Front Axle |
| Height | 64 mm |
| Width | 148 mm |
| Additional Information | with accessories |
| Thickness | 19 mm |
| Additional Information 2 | with brake caliper screws, with anti-squeak plate |
| Brake System | TRW |
| Wear Warning Contact | incl. wear warning contact |
| WVA Number | 26169 |
| Number of wear indicators | 1 Per Axle |
| Warning Contact Length | 170 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Extra Description | XTRA LINE |
Additional Information
General Information
Brembo Xtra: the perfect brake pad for Brembo Xtra and Brembo Max brake discs.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Height | 64 mm |
| Width | 148 mm |
| Additional Information | with accessories |
| Thickness | 19 mm |
| Additional Information 2 | with brake caliper screws, with anti-squeak plate |
| Brake System | TRW |
| Wear Warning Contact | incl. wear warning contact |
| WVA Number | 26169 |
| Number of wear indicators | 1 Per Axle |
| Warning Contact Length | 170 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Extra Description | XTRA LINE |
Additional Information
General Information
Brembo Xtra: the perfect brake pad for Brembo Xtra and Brembo Max brake discs.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023


























