Important compatibility info
| Voltage | 12 V |
| Operating Mode | Electric |
| Type | Auxiliary water pump (cooling water circuit) |
| Function | Auxiliary water pump (cooling water circuit) |
| Additional Information 2 | without fastening clamp |
| Water pump impeller material | Plastic |
Important compatibility info
| Voltage | 12 V |
| Operating Mode | Electric |
| Type | Auxiliary water pump (cooling water circuit) |
| Function | Auxiliary water pump (cooling water circuit) |
| Additional Information 2 | without fastening clamp |
| Water pump impeller material | Plastic |
Important compatibility info
| Function | Wiper Motor |
| Placement on Vehicle | Rear |
| Voltage | 12 V |
| Extra Description | ORIGINAL PART |
| Type | Wiper Motor |
| Weight | 1.18 kg |
Important compatibility info
| Function | Wiper Motor |
| Placement on Vehicle | Rear |
| Voltage | 12 V |
| Extra Description | ORIGINAL PART |
| Type | Wiper Motor |
| Weight | 1.18 kg |
Important compatibility info
| Function | Drive Shaft |
| Type | Drive Shaft |
| External Teeth, Wheel Side | 24 |
| Number of Teeth, ABS ring | 48 |
| External Teeth, Diff.Side | 25 |
| Length | 600 mm |
| Placement on Vehicle | Front Axle Left |
| Manufacturer | HYUNDAI |
| Model | i10 |
Important compatibility info
| Function | Drive Shaft |
| Type | Drive Shaft |
| External Teeth, Wheel Side | 24 |
| Number of Teeth, ABS ring | 48 |
| External Teeth, Diff.Side | 25 |
| Length | 600 mm |
| Placement on Vehicle | Front Axle Left |
| Manufacturer | HYUNDAI |
| Model | i10 |
Important compatibility info
| Terminal Type | Standard |
| Battery Capacity 5h (Ah) | 90 Ah |
| Marine Cranking Amperage (MCA) | 950 A |
| Ampere-Hours | 115 A |
| Battery Capacity 100h (Ah) | 150 Ah |
| Terminal Layout | Terminals Across Centre |
| Cold Cranking Amperage (CCA) | 760 A |
| Length | 330 mm |
| Type | Wet |
| Voltage | 12 V |
| Height | 235 mm |
| Width | 175 mm |
| Warranty | 4 year warranty |
Important compatibility info
| Terminal Type | Standard |
| Battery Capacity 5h (Ah) | 90 Ah |
| Marine Cranking Amperage (MCA) | 950 A |
| Ampere-Hours | 115 A |
| Battery Capacity 100h (Ah) | 150 Ah |
| Terminal Layout | Terminals Across Centre |
| Cold Cranking Amperage (CCA) | 760 A |
| Length | 330 mm |
| Type | Wet |
| Voltage | 12 V |
| Height | 235 mm |
| Width | 175 mm |
| Warranty | 4 year warranty |
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 538 mm |
| External Teeth, Wheel Side | 38 |
| Length 1 | 538 mm |
| Transmission-side joint diameter | 108 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 538 mm |
| External Teeth, Wheel Side | 38 |
| Length 1 | 538 mm |
| Transmission-side joint diameter | 108 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Important compatibility info
| Width | 22 mm |
| Belts | with rounded tooth profile |
| Number of Teeth | 104 |
| Function | Timing Belt Kit |
| Type | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Blue Print Timing Belt (ADZ97512)
- 1x Blue Print Tensioner Pulley, timing belt (ADZ97612)
Important compatibility info
| Width | 22 mm |
| Belts | with rounded tooth profile |
| Number of Teeth | 104 |
| Function | Timing Belt Kit |
| Type | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Blue Print Timing Belt (ADZ97512)
- 1x Blue Print Tensioner Pulley, timing belt (ADZ97612)
Important compatibility info
| Type | Catalytic Converter |
| Guarantee | 2 years guarantee |
| To be used with part number(s) | FK90665 |
| Placement on Vehicle | Front |
| Includes fitting kit | FK90665B |
| Extra Description | Non-approved |
| Function | Catalytic Converter |
| Material | Ceramic |
Additional Information
Technical Information
Illegal to Supply for Vehicles Registered on or after 01/03/ 01 in the UK
Important compatibility info
| Type | Catalytic Converter |
| Guarantee | 2 years guarantee |
| To be used with part number(s) | FK90665 |
| Placement on Vehicle | Front |
| Includes fitting kit | FK90665B |
| Extra Description | Non-approved |
| Function | Catalytic Converter |
| Material | Ceramic |
Additional Information
Technical Information
Illegal to Supply for Vehicles Registered on or after 01/03/ 01 in the UK
Important compatibility info
| Length | 750 mm |
| Number of Poles | 4 -pin connector |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| Extra Description | Cambiare |
| Placement on Vehicle | after catalytic converter |
Important compatibility info
| Length | 750 mm |
| Number of Poles | 4 -pin connector |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| Extra Description | Cambiare |
| Placement on Vehicle | after catalytic converter |
Important compatibility info
| Colour | Yellow |
| Connector Shape | Oval |
| Type | Injector |
| Function | Injector |
Important compatibility info
| Colour | Yellow |
| Connector Shape | Oval |
| Type | Injector |
| Function | Injector |
Important compatibility info
| Function | Brake Caliper |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Placement on Vehicle | Rear Axle Right |
| Additional Information | with electric motor |
| Material | Cast Iron |
| Vehicle Equipment | for vehicles with electric parking brake |
| Paired article numbers | 183210 |
| Brake caliper piston diameter | 41 mm |
| Type | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Brake Caliper |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Placement on Vehicle | Rear Axle Right |
| Additional Information | with electric motor |
| Material | Cast Iron |
| Vehicle Equipment | for vehicles with electric parking brake |
| Paired article numbers | 183210 |
| Brake caliper piston diameter | 41 mm |
| Type | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Timing Belt Kit |
| Width | 25 mm |
| Number of Teeth | 145 |
| for OE number | 04L 109 119 D S8 |
| Type | Timing Belt Kit |
| Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
| Belts | with rounded tooth profile |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (48289)
- 1x Febi Tensioner Pulley, timing belt (178943)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (37019)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (07022)
- 1x Febi Mounting Set, tension/deflection pulley (timing belt) (181517)
Important compatibility info
| Function | Timing Belt Kit |
| Width | 25 mm |
| Number of Teeth | 145 |
| for OE number | 04L 109 119 D S8 |
| Type | Timing Belt Kit |
| Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
| Belts | with rounded tooth profile |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (48289)
- 1x Febi Tensioner Pulley, timing belt (178943)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (37019)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (07022)
- 1x Febi Mounting Set, tension/deflection pulley (timing belt) (181517)
Important compatibility info
| Placement on Vehicle | Front |
| Operating Mode | Pneumatic |
| Paired article numbers | 192762 |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Max. Length | 340 mm |
| Min. Length | 224 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
| Extra Description | febi Plus |
| External Thread Size | M12 x 1,75 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front |
| Operating Mode | Pneumatic |
| Paired article numbers | 192762 |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Max. Length | 340 mm |
| Min. Length | 224 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
| Extra Description | febi Plus |
| External Thread Size | M12 x 1,75 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thickness | 430 mm. 128 mm |
| External Thread Size | M16 x 1,5 |
| Function | Bellow, air suspension |
| Type | Bellow, air suspension |
| Outer diameter | 228 mm. 197 mm |
| Placement on Vehicle | Rear Axle |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thickness | 430 mm. 128 mm |
| External Thread Size | M16 x 1,5 |
| Function | Bellow, air suspension |
| Type | Bellow, air suspension |
| Outer diameter | 228 mm. 197 mm |
| Placement on Vehicle | Rear Axle |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 48.5 mm |
| Outer diameter | 300 mm |
| Brake Disc Thickness | 25 mm |
| Minimum thickness | 23 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 63.5 mm |
| Surface | Coated |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Net weight | 8.63 kg |
| Rotor Style | Solid |
Important compatibility info
| Height | 48.5 mm |
| Outer diameter | 300 mm |
| Brake Disc Thickness | 25 mm |
| Minimum thickness | 23 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 63.5 mm |
| Surface | Coated |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Net weight | 8.63 kg |
| Rotor Style | Solid |
Important compatibility info
| Function | Radiator, engine cooling |
| Radiator type | Brazed cooling fins |
| Material | Aluminium |
| Core Depth | 16 mm |
| Core Width | 418 mm |
| Core Length | 485 mm |
| Type | Radiator, engine cooling |
Important compatibility info
| Function | Radiator, engine cooling |
| Radiator type | Brazed cooling fins |
| Material | Aluminium |
| Core Depth | 16 mm |
| Core Width | 418 mm |
| Core Length | 485 mm |
| Type | Radiator, engine cooling |
Important compatibility info
| Centering Diameter | 70 mm |
| Minimum thickness | 26 mm |
| Rotor Style | Vented |
| Height | 39.7 mm |
| Brake Disc Thickness | 28 mm |
| Number of Holes | 5 |
| Function | Brake Disc |
| Bolt Hole Circle Diameter | 110 mm |
| Outer diameter | 330 mm |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Front Axle |
Important compatibility info
| Centering Diameter | 70 mm |
| Minimum thickness | 26 mm |
| Rotor Style | Vented |
| Height | 39.7 mm |
| Brake Disc Thickness | 28 mm |
| Number of Holes | 5 |
| Function | Brake Disc |
| Bolt Hole Circle Diameter | 110 mm |
| Outer diameter | 330 mm |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Front Axle |
Important compatibility info
| Material | Cast Steel |
| Placement on Vehicle | Right, Lower |
| Length | 480 mm |
| Height | 80 mm |
| Width | 370 mm |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | TC4364 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Important compatibility info
| Material | Cast Steel |
| Placement on Vehicle | Right, Lower |
| Length | 480 mm |
| Height | 80 mm |
| Width | 370 mm |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | TC4364 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Important compatibility info
| Material | Cast Steel |
| Placement on Vehicle | Left, Lower |
| Length | 480 mm |
| Height | 80 mm |
| Width | 370 mm |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | TC4363 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Important compatibility info
| Material | Cast Steel |
| Placement on Vehicle | Left, Lower |
| Length | 480 mm |
| Height | 80 mm |
| Width | 370 mm |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | TC4363 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 450 mm |
| Width | 450 mm |
| Material | Aluminium |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | TC4615 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 450 mm |
| Width | 450 mm |
| Material | Aluminium |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | TC4615 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Important compatibility info
| Type | Silencer Insert, rear muffler |
| Function | Silencer Insert, rear muffler |
Additional Information
Important compatibility info
| Type | Silencer Insert, rear muffler |
| Function | Silencer Insert, rear muffler |
Additional Information
Important compatibility info
| Hole Spacing | 115 mm |
| Placement on Vehicle | Front Axle |
| Length | 652 mm |
| Steering arm type | Trailing Arm |
| Pipe Diameter | 48 mm |
| Mounting points diameter | 17 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Hole Spacing | 115 mm |
| Placement on Vehicle | Front Axle |
| Length | 652 mm |
| Steering arm type | Trailing Arm |
| Pipe Diameter | 48 mm |
| Mounting points diameter | 17 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Shock Absorber Type | Oil Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Extra Description | MONROE MAGNUM Axle |
Important compatibility info
| Shock Absorber Type | Oil Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Extra Description | MONROE MAGNUM Axle |
Important compatibility info
| Outlet Diameter | 11.6 mm |
| Inlet Diameter | 14.3 mm |
| Additional Information 2 | with seal ring |
| Core Depth | 17 mm |
| Core Width | 365 mm |
| Core Length | 638 mm |
| Material | Aluminium |
| Function | Condenser, air conditioning |
| Extra Description | EASY FIT |
| Type | Condenser, air conditioning |
Important compatibility info
| Outlet Diameter | 11.6 mm |
| Inlet Diameter | 14.3 mm |
| Additional Information 2 | with seal ring |
| Core Depth | 17 mm |
| Core Width | 365 mm |
| Core Length | 638 mm |
| Material | Aluminium |
| Function | Condenser, air conditioning |
| Extra Description | EASY FIT |
| Type | Condenser, air conditioning |
Important compatibility info
| Function | Starter |
| Manufacturer Restriction | Denso |
| Number of Thread Bores | 2 |
| Number of mounting bores | 2 |
| Number of Teeth | 11 |
| Voltage | 12 V |
| Rated Power | 2 kW |
| Type | Starter |
| Weight | 4.5 kg |
| Length | 27 cm |
| Height | 13.59 cm |
| Width | 16.21 cm |
Important compatibility info
| Function | Starter |
| Manufacturer Restriction | Denso |
| Number of Thread Bores | 2 |
| Number of mounting bores | 2 |
| Number of Teeth | 11 |
| Voltage | 12 V |
| Rated Power | 2 kW |
| Type | Starter |
| Weight | 4.5 kg |
| Length | 27 cm |
| Height | 13.59 cm |
| Width | 16.21 cm |
Important compatibility info
| Multi-piece | Two-piece |
| Additional Information | with synthetic grease |
| Number of Teeth | 23 |
| Outer diameter | 256 mm |
| Function | Clutch Kit |
| Type | Clutch Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Multi-piece | Two-piece |
| Additional Information | with synthetic grease |
| Number of Teeth | 23 |
| Outer diameter | 256 mm |
| Function | Clutch Kit |
| Type | Clutch Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023
























