Important compatibility info
| Length | 182 mm |
| Height | 125 mm |
| Width | 165 mm |
| Number of Poles | 3 -pin connector |
| Connector Shape | angular |
| Housing Type | with housing |
| Function | Mass Air Flow Sensor |
| Type | Mass Air Flow Sensor |
Important compatibility info
| Length | 182 mm |
| Height | 125 mm |
| Width | 165 mm |
| Number of Poles | 3 -pin connector |
| Connector Shape | angular |
| Housing Type | with housing |
| Function | Mass Air Flow Sensor |
| Type | Mass Air Flow Sensor |
Important compatibility info
| Function | Silencer Insert, rear muffler |
| Type | Silencer Insert, rear muffler |
Additional Information
Important compatibility info
| Function | Silencer Insert, rear muffler |
| Type | Silencer Insert, rear muffler |
Additional Information
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Replaces | HO196L; HO199L |
| External Teeth, Wheel Side | 26 |
| External Teeth, Diff.Side | 27 |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Length | 630 mm |
| Inner Length | 57 mm |
| Braking / Drive Dynamics | for vehicles with ABS |
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Replaces | HO196L; HO199L |
| External Teeth, Wheel Side | 26 |
| External Teeth, Diff.Side | 27 |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Length | 630 mm |
| Inner Length | 57 mm |
| Braking / Drive Dynamics | for vehicles with ABS |
Important compatibility info
| Type | Clutch Kit |
| Outer diameter | 251 mm |
| Additional Information 2 | with clutch release bearing |
| Number of Teeth | 24 |
| Multi-piece | Three-piece |
| Function | Clutch Kit |
| Additional Information | with synthetic grease |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Blue Print Clutch Pressure Plate (ADZ93220N)
- 1x Blue Print Clutch Disc (ADZ93123)
- 1x Blue Print Clutch Release Bearing (ADZ93301)
Important compatibility info
| Type | Clutch Kit |
| Outer diameter | 251 mm |
| Additional Information 2 | with clutch release bearing |
| Number of Teeth | 24 |
| Multi-piece | Three-piece |
| Function | Clutch Kit |
| Additional Information | with synthetic grease |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Blue Print Clutch Pressure Plate (ADZ93220N)
- 1x Blue Print Clutch Disc (ADZ93123)
- 1x Blue Print Clutch Release Bearing (ADZ93301)
Important compatibility info
| Type | Silencer Insert, rear muffler |
| Function | Silencer Insert, rear muffler |
Additional Information
Important compatibility info
| Type | Silencer Insert, rear muffler |
| Function | Silencer Insert, rear muffler |
Additional Information
Important compatibility info
| Weight | 1.834 g |
| Placement on Vehicle | Front, Right |
| Operating Mode | Hydraulic |
| Colour | silver |
| Quality | OE Exact |
| Type | Mounting, engine |
| Function | Mounting, engine |
Important compatibility info
| Weight | 1.834 g |
| Placement on Vehicle | Front, Right |
| Operating Mode | Hydraulic |
| Colour | silver |
| Quality | OE Exact |
| Type | Mounting, engine |
| Function | Mounting, engine |
Important compatibility info
| Rated Power | 1.8 kW |
| Function | Starter |
| Fastening hole angle measurement [Degree] | 0 ° |
| Jaw opening angle measurement [Degree] | 90 ° |
| Starter Type | Self-supporting |
| Pinion Rest Position | 21 mm |
| Connecting Angle | 0 ° |
| Clamp | 50, 30 |
| Position / Degree | mittig ° |
| Number of Thread Bores | 2 |
| Flange Diameter | 74 mm |
| Number of mounting bores | 1 |
| Rotation Direction | Clockwise rotation |
| Bore Diameter | 8 mm |
| Thread Measurement 2 | M10x1.5 |
| Thread Measurement 1 | M10x1.5 |
| Number of Teeth | 9 |
| Length | 234 mm |
| Voltage | 12 V |
| Type | Starter |
Important compatibility info
| Rated Power | 1.8 kW |
| Function | Starter |
| Fastening hole angle measurement [Degree] | 0 ° |
| Jaw opening angle measurement [Degree] | 90 ° |
| Starter Type | Self-supporting |
| Pinion Rest Position | 21 mm |
| Connecting Angle | 0 ° |
| Clamp | 50, 30 |
| Position / Degree | mittig ° |
| Number of Thread Bores | 2 |
| Flange Diameter | 74 mm |
| Number of mounting bores | 1 |
| Rotation Direction | Clockwise rotation |
| Bore Diameter | 8 mm |
| Thread Measurement 2 | M10x1.5 |
| Thread Measurement 1 | M10x1.5 |
| Number of Teeth | 9 |
| Length | 234 mm |
| Voltage | 12 V |
| Type | Starter |
Important compatibility info
| Function | Hydraulic Pump, steering |
| Operating Mode | Hydraulic |
| Type | Hydraulic Pump, steering |
| Pulleys | without belt pulley |
| Adapter Shape | triangular |
Important compatibility info
| Function | Hydraulic Pump, steering |
| Operating Mode | Hydraulic |
| Type | Hydraulic Pump, steering |
| Pulleys | without belt pulley |
| Adapter Shape | triangular |
Important compatibility info
| Function | Hydraulic Pump, steering |
| Type | Hydraulic Pump, steering |
| Operating Mode | Hydraulic |
| for steering manufacturer | ZF |
| Pulleys | without belt pulley |
| Pressure | 120 bar |
| Number of Thread Bores | 3 |
| Fastening Type | 3-point attachment |
| Adapter Shape | triangular |
| Number of mounting bores at adapter | 3 |
Important compatibility info
| Function | Hydraulic Pump, steering |
| Type | Hydraulic Pump, steering |
| Operating Mode | Hydraulic |
| for steering manufacturer | ZF |
| Pulleys | without belt pulley |
| Pressure | 120 bar |
| Number of Thread Bores | 3 |
| Fastening Type | 3-point attachment |
| Adapter Shape | triangular |
| Number of mounting bores at adapter | 3 |
Important compatibility info
| Number of mounting bores | 7 |
| Type | Flywheel |
| Function | Flywheel |
Important compatibility info
| Number of mounting bores | 7 |
| Type | Flywheel |
| Function | Flywheel |
Important compatibility info
| Function | Alternator |
| Manufacturer Restriction | Valeo |
| Alternator Charge Current | 120 A |
| Pulleys | with v-ribbed belt pulley |
| Number of Ribs | 6 |
| Voltage | 12 V |
| Type | Alternator |
| Weight | 2.75 kg |
| Length | 26.01 cm |
| Height | 19.99 cm |
| Width | 22.5 cm |
Important compatibility info
| Function | Alternator |
| Manufacturer Restriction | Valeo |
| Alternator Charge Current | 120 A |
| Pulleys | with v-ribbed belt pulley |
| Number of Ribs | 6 |
| Voltage | 12 V |
| Type | Alternator |
| Weight | 2.75 kg |
| Length | 26.01 cm |
| Height | 19.99 cm |
| Width | 22.5 cm |
Important compatibility info
| Chain Type | Simplex |
| Function | Timing Chain Kit |
| Number of Chain Links | 118. 56. 84 |
| Additional Information | with gears |
| Type | Timing Chain Kit |
Important compatibility info
| Chain Type | Simplex |
| Function | Timing Chain Kit |
| Number of Chain Links | 118. 56. 84 |
| Additional Information | with gears |
| Type | Timing Chain Kit |
Important compatibility info
| Outer diameter | 277 mm |
| Type | Clutch Pressure Plate |
| Function | Clutch Pressure Plate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 277 mm |
| Type | Clutch Pressure Plate |
| Function | Clutch Pressure Plate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Catalytic Converter |
| Labels & Certifications | Euro 4 |
| Type | Catalytic Converter |
Additional Information
Important compatibility info
| Function | Catalytic Converter |
| Labels & Certifications | Euro 4 |
| Type | Catalytic Converter |
Additional Information
Important compatibility info
| Additional Information 2 | with integrated ABS sensor |
| Function | Wheel Bearing Kit |
| Bearing Code | Gen 3 |
| Type | Wheel Bearing Kit |
| Placement on Vehicle | Rear Axle |
Important compatibility info
| Additional Information 2 | with integrated ABS sensor |
| Function | Wheel Bearing Kit |
| Bearing Code | Gen 3 |
| Type | Wheel Bearing Kit |
| Placement on Vehicle | Rear Axle |
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA7456 |
| Additional Information 2 | with ball joint |
Additional Information
- 1x First Line Ball Joint (FBJ5255)
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA7456 |
| Additional Information 2 | with ball joint |
Additional Information
- 1x First Line Ball Joint (FBJ5255)
Important compatibility info
| Net weight | 0.400 kg |
| Function | fuel supply unit |
| Plug Type | Female |
| Housing Colour | Black |
| Number of Inlets / Outlets | 2 |
| Operating Mode | Electric |
| Number of Poles | 2 -pin connector |
| Additional Information | with fuel sender unit |
| Weight | 0.830 kg |
| Type | fuel supply unit |
Important compatibility info
| Net weight | 0.400 kg |
| Function | fuel supply unit |
| Plug Type | Female |
| Housing Colour | Black |
| Number of Inlets / Outlets | 2 |
| Operating Mode | Electric |
| Number of Poles | 2 -pin connector |
| Additional Information | with fuel sender unit |
| Weight | 0.830 kg |
| Type | fuel supply unit |
Important compatibility info
| Weight | 0.747 kg |
| Additional Information | with gaskets/seals |
| Number of Poles | 5 -pin connector |
| Inlet Diameter | 58 mm |
| Housing Colour | Black |
| Connector Shape | D Shape |
| Type | Throttle Body |
| Function | Throttle Body |
| Net weight | 0.644 kg |
| Replaces | 68312 |
Important compatibility info
| Number of Poles | 6 -pin connector |
| Inlet Diameter | 50 mm |
| Housing Colour | Black |
| Connector Shape | rectangular |
| Type | Throttle Body |
| Function | Throttle Body |
| Net weight | 0.906 kg |
| Replaces | LTB083 |
| Additional Information | without gasket/seal |
| Weight | 1.20 kg |
Important compatibility info
| Number of Poles | 6 -pin connector |
| Inlet Diameter | 50 mm |
| Housing Colour | Black |
| Connector Shape | rectangular |
| Type | Throttle Body |
| Function | Throttle Body |
| Net weight | 0.906 kg |
| Replaces | LTB083 |
| Additional Information | without gasket/seal |
| Weight | 1.20 kg |
Important compatibility info
| Function | fuel supply unit |
| Delivery Quantity | 120 l/h |
| Housing Colour | White |
| Number of Inlets / Outlets | 1 |
| Operating Mode | Electric |
| Number of Poles | 4 -pin connector |
| Additional Information | with fuel sender unit |
| Weight | 1.080 kg |
| Type | fuel supply unit |
| Extra Description | Lucas Premium Blade |
| Net weight | 0.976 kg |
| Diameter | 124 mm |
Important compatibility info
| Function | fuel supply unit |
| Delivery Quantity | 120 l/h |
| Housing Colour | White |
| Number of Inlets / Outlets | 1 |
| Operating Mode | Electric |
| Number of Poles | 4 -pin connector |
| Additional Information | with fuel sender unit |
| Weight | 1.080 kg |
| Type | fuel supply unit |
| Extra Description | Lucas Premium Blade |
| Net weight | 0.976 kg |
| Diameter | 124 mm |
Important compatibility info
| Outer diameter | 330 mm |
| Function | Brake Disc |
| Centering Diameter | 98 mm |
| Minimum thickness | 32 mm |
| Number of Holes | 5 |
| Quantity | 1 |
| Brake Disc Thickness | 34 mm |
| Height | 69.5 mm |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Front Axle Left |
| Surface | Coated |
| Number of mounting bores | 1 |
| Rotor Style | Vented |
| Inspection Tag | ECE R90 Homologated |
| Brake Disc Type | Vented |
Important compatibility info
| Outer diameter | 330 mm |
| Function | Brake Disc |
| Centering Diameter | 98 mm |
| Minimum thickness | 32 mm |
| Number of Holes | 5 |
| Quantity | 1 |
| Brake Disc Thickness | 34 mm |
| Height | 69.5 mm |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Front Axle Left |
| Surface | Coated |
| Number of mounting bores | 1 |
| Rotor Style | Vented |
| Inspection Tag | ECE R90 Homologated |
| Brake Disc Type | Vented |
Important compatibility info
| Placement on Vehicle | Left, Upper Left |
| Function | Tensioner, timing chain |
| Type | Tensioner, timing chain |
| Operating Mode | Hydraulic |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left, Upper Left |
| Function | Tensioner, timing chain |
| Type | Tensioner, timing chain |
| Operating Mode | Hydraulic |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Timing Belt Kit |
| Extra Description | PowerGrip™ |
| Type | Timing Belt Kit |
Additional Information
- 1x Gates Timing Belt (5651XS)
- 1x Gates Tensioner Pulley, timing belt (T43009)
- 1x Gates Deflection Pulley/Guide Pulley, timing belt (T42316)
Important compatibility info
| Function | Timing Belt Kit |
| Extra Description | PowerGrip™ |
| Type | Timing Belt Kit |
Additional Information
- 1x Gates Timing Belt (5651XS)
- 1x Gates Tensioner Pulley, timing belt (T43009)
- 1x Gates Deflection Pulley/Guide Pulley, timing belt (T42316)
Important compatibility info
| Length 2 | 2553 mm |
| Length 3 | 2933 mm |
| Length 4 | 2563 mm |
| Function | Cable Pull, manual transmission |
| Length 1 | 2999 mm |
| Type | Cable Pull, manual transmission |
Important compatibility info
| Length 2 | 2553 mm |
| Length 3 | 2933 mm |
| Length 4 | 2563 mm |
| Function | Cable Pull, manual transmission |
| Length 1 | 2999 mm |
| Type | Cable Pull, manual transmission |
Important compatibility info
| Net weight | 0.868 kg |
| Function | fuel supply unit |
| Plug Type | Female |
| for OE number | 13436580 |
| Housing Colour | White |
| Number of Inlets / Outlets | 2 |
| Operating Mode | Electric |
| Number of Poles | 4 -pin connector |
| Weight | 1.316 kg |
| Type | fuel supply unit |
Important compatibility info
| Net weight | 0.868 kg |
| Function | fuel supply unit |
| Plug Type | Female |
| for OE number | 13436580 |
| Housing Colour | White |
| Number of Inlets / Outlets | 2 |
| Operating Mode | Electric |
| Number of Poles | 4 -pin connector |
| Weight | 1.316 kg |
| Type | fuel supply unit |
Important compatibility info
| Net weight | 0.772 kg |
| Extra Description | Kerr Nelson |
| Function | Fuel Feed Unit |
| Plug Type | Female |
| Housing Colour | White |
| Number of Inlets / Outlets | 2 |
| Operating Mode | Electric |
| Number of Poles | 5 -pin connector |
| Additional Information | with fuel sender unit |
| Placement on Vehicle | in fuel tank |
| Weight | 0.976 kg |
| Type | Fuel Feed Unit |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

























