Important compatibility info
| Material | Plastic |
| Colour | Black |
| Number of Connectors / Ports | 5 |
| Resistor Type | Hot-wire Sensor |
| Function | Mass Air Flow Sensor |
| Type | Mass Air Flow Sensor |
| Housing Type | without housing |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Plastic |
| Colour | Black |
| Number of Connectors / Ports | 5 |
| Resistor Type | Hot-wire Sensor |
| Function | Mass Air Flow Sensor |
| Type | Mass Air Flow Sensor |
| Housing Type | without housing |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V |
| for OE number | 104210-4760 |
| Alternator Charge Current | 120 A |
| Function | Alternator |
| Type | Alternator |
Important compatibility info
| Voltage | 12 V |
| for OE number | 104210-4760 |
| Alternator Charge Current | 120 A |
| Function | Alternator |
| Type | Alternator |
Important compatibility info
Important compatibility info
Important compatibility info
| Labels & Certifications | Euro 4 |
| Function | Catalytic Converter |
| Type | Catalytic Converter |
Additional Information
Important compatibility info
| Labels & Certifications | Euro 4 |
| Function | Catalytic Converter |
| Type | Catalytic Converter |
Additional Information
Important compatibility info
| Belt Pulley Diameter | 54 mm |
| Voltage | 12 V |
| Function | Alternator |
| Number of Ribs | 6 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 150 A |
| Type | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Belt Pulley Diameter | 54 mm |
| Voltage | 12 V |
| Function | Alternator |
| Number of Ribs | 6 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 150 A |
| Type | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Shock Absorber Design | Spring-bearing Damper |
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Monotube |
| Shock Absorber Mounting Type | Top pin |
| Function | Shock Absorber |
| Type | Shock Absorber |
Important compatibility info
| Shock Absorber Design | Spring-bearing Damper |
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Monotube |
| Shock Absorber Mounting Type | Top pin |
| Function | Shock Absorber |
| Type | Shock Absorber |
Important compatibility info
| Transmission-side joint diameter | 130 mm |
| External Teeth, Wheel Side | 33 |
| Placement on Vehicle | Front Axle Right |
| Length | 620 mm |
| Replaces | AU163AR |
| Number of Teeth, ABS ring | 45 |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Braking / Drive Dynamics | for vehicles with ABS |
Important compatibility info
| Transmission-side joint diameter | 130 mm |
| External Teeth, Wheel Side | 33 |
| Placement on Vehicle | Front Axle Right |
| Length | 620 mm |
| Replaces | AU163AR |
| Number of Teeth, ABS ring | 45 |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Braking / Drive Dynamics | for vehicles with ABS |
Important compatibility info
| To be used with part number(s) | FK91771 |
| Includes fitting kit | FK91771B |
| Extra Description | Approved |
| Function | Catalytic Converter |
| Guarantee | 2 years guarantee |
| Type | Catalytic Converter |
| Inspection Tag | E9-103R |
| Product met | Euro 4 |
| Placement on Vehicle | Rear |
| Material | Ceramic |
Important compatibility info
| To be used with part number(s) | FK91771 |
| Includes fitting kit | FK91771B |
| Extra Description | Approved |
| Function | Catalytic Converter |
| Guarantee | 2 years guarantee |
| Type | Catalytic Converter |
| Inspection Tag | E9-103R |
| Product met | Euro 4 |
| Placement on Vehicle | Rear |
| Material | Ceramic |
Important compatibility info
| Type | Silencer Insert, rear muffler |
| Function | Silencer Insert, rear muffler |
Additional Information
Important compatibility info
| Diameter | 220 mm |
| Additional Information 2 | with clutch release bearing |
| Type | Clutch Kit |
| Function | Clutch Kit |
| Extra Description | LuK RepSet |
Additional Information
- 1x LuK Clutch Pressure Plate (122016810)
- 1x LuK Clutch Disc (322009117)
- 1x LuK Clutch Release Bearing (500074410)
Important compatibility info
| Diameter | 220 mm |
| Additional Information 2 | with clutch release bearing |
| Type | Clutch Kit |
| Function | Clutch Kit |
| Extra Description | LuK RepSet |
Additional Information
- 1x LuK Clutch Pressure Plate (122016810)
- 1x LuK Clutch Disc (322009117)
- 1x LuK Clutch Release Bearing (500074410)
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 11 |
| Rotation Direction | Clockwise rotation |
| Rated Power | 2.3 kW |
| Type | Starter |
| Function | Starter |
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 11 |
| Rotation Direction | Clockwise rotation |
| Rated Power | 2.3 kW |
| Type | Starter |
| Function | Starter |
Important compatibility info
| Additional Information | without reservoir |
| Pulleys | with belt pulley |
| Operating Mode | Hydraulic |
| Type | Hydraulic Pump, steering |
| for steering manufacturer | ZF |
| Additional Information 2 | Belt Pulley pressed on |
| Number of grooves | 6 |
| Pressure | 130 bar |
| Rotation Direction | Clockwise rotation |
| Belt Pulley Diameter | 130 mm |
| Function | Hydraulic Pump, steering |
| Number of Thread Bores | 4 |
| Fastening Type | Four-point attachment |
Important compatibility info
| Additional Information | without reservoir |
| Pulleys | with belt pulley |
| Operating Mode | Hydraulic |
| Type | Hydraulic Pump, steering |
| for steering manufacturer | ZF |
| Additional Information 2 | Belt Pulley pressed on |
| Number of grooves | 6 |
| Pressure | 130 bar |
| Rotation Direction | Clockwise rotation |
| Belt Pulley Diameter | 130 mm |
| Function | Hydraulic Pump, steering |
| Number of Thread Bores | 4 |
| Fastening Type | Four-point attachment |
Important compatibility info
| Placement on Vehicle | for cylinder 3, for cylinder 4 |
| Additional Information 2 | with bush for piston pin boss, with cooling duct, with piston ring carrier, for keystone connecting rod |
| Component Number | 08-114907-00 |
| Cylinder Bore | 80 mm |
| Bolt Diameter | 26 mm |
| Oversize | 0.5 mm |
| Compression Height | 45.55 mm |
| Bolt length | 66 mm |
| Recess Depth 1 | 17.9 mm |
| Recess Diameter | 38 mm |
| Valve pocket depth 1 | 1.1 mm |
| Machined | with cut-out for oil jet |
| Production Number | 07969K102 |
| Height | 68.6 mm |
| Function | Piston |
| Type | Piston |
Additional Information
Technical Information
A : 45.550 D : 68.550
Important compatibility info
| Placement on Vehicle | for cylinder 3, for cylinder 4 |
| Additional Information 2 | with bush for piston pin boss, with cooling duct, with piston ring carrier, for keystone connecting rod |
| Component Number | 08-114907-00 |
| Cylinder Bore | 80 mm |
| Bolt Diameter | 26 mm |
| Oversize | 0.5 mm |
| Compression Height | 45.55 mm |
| Bolt length | 66 mm |
| Recess Depth 1 | 17.9 mm |
| Recess Diameter | 38 mm |
| Valve pocket depth 1 | 1.1 mm |
| Machined | with cut-out for oil jet |
| Production Number | 07969K102 |
| Height | 68.6 mm |
| Function | Piston |
| Type | Piston |
Additional Information
Technical Information
A : 45.550 D : 68.550
Important compatibility info
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Extra Description | Non-approved |
| Type | Catalytic Converter |
| To be used with part number(s) | FK91123 |
| Material | Ceramic |
Additional Information
Technical Information
Illegal to Supply for Vehicles Registered on or after 01/03/ 01 in the UK
Important compatibility info
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Extra Description | Non-approved |
| Type | Catalytic Converter |
| To be used with part number(s) | FK91123 |
| Material | Ceramic |
Additional Information
Technical Information
Illegal to Supply for Vehicles Registered on or after 01/03/ 01 in the UK
Important compatibility info
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA7140 |
| Placement on Vehicle | Front Axle Left, Lower |
| Additional Information 2 | with ball joint |
Important compatibility info
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA7140 |
| Placement on Vehicle | Front Axle Left, Lower |
| Additional Information 2 | with ball joint |
Important compatibility info
| Battery | with handles, with load status display |
| Voltage | 12 V |
| Suitable for (starter battery) | with central degassing |
| Terminal Layout | Positive Front Right |
| Type | Starter Battery |
| Cold Cranking Amperage (CCA) | 730 A |
| Hold-down Type | B03 |
| Port / Connector type | T1 |
| Ampere-Hours | 75 Ah |
| NCC Class | B |
| Marine Cranking Amperage (MCA) | 900 A |
| Extra Description | Leisure Batteries |
| Filled Weight | 19.3 kg |
| Width | 175 mm |
| Height | 190 mm |
| Length | 278 mm |
| Function | Starter Battery |
| Warranty | 4 year warranty |
Important compatibility info
| Battery | with handles, with load status display |
| Voltage | 12 V |
| Suitable for (starter battery) | with central degassing |
| Terminal Layout | Positive Front Right |
| Type | Starter Battery |
| Cold Cranking Amperage (CCA) | 730 A |
| Hold-down Type | B03 |
| Port / Connector type | T1 |
| Ampere-Hours | 75 Ah |
| NCC Class | B |
| Marine Cranking Amperage (MCA) | 900 A |
| Extra Description | Leisure Batteries |
| Filled Weight | 19.3 kg |
| Width | 175 mm |
| Height | 190 mm |
| Length | 278 mm |
| Function | Starter Battery |
| Warranty | 4 year warranty |
Important compatibility info
| Extra Description | Non-approved |
| Placement on Vehicle | for cylinder 4-6 |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Type | Catalytic Converter |
| To be used with part number(s) | FK91341 |
| Material | Ceramic |
Additional Information
Technical Information
Illegal to Supply for Vehicles Registered on or after 01/03/ 01 in the UK
Important compatibility info
| Extra Description | Non-approved |
| Placement on Vehicle | for cylinder 4-6 |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Type | Catalytic Converter |
| To be used with part number(s) | FK91341 |
| Material | Ceramic |
Additional Information
Technical Information
Illegal to Supply for Vehicles Registered on or after 01/03/ 01 in the UK
Important compatibility info
| Additional Information | with central slave cylinder |
| Number of Parts | 3 -part |
| Hub Profile | 25 x 22 |
| Function | Clutch Kit |
| Number of Teeth | 14 |
| Type | Clutch Kit |
Important compatibility info
| Additional Information | with central slave cylinder |
| Number of Parts | 3 -part |
| Hub Profile | 25 x 22 |
| Function | Clutch Kit |
| Number of Teeth | 14 |
| Type | Clutch Kit |
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 10 |
| Rated Power | 1.4 kW |
| Function | Starter |
| Type | Starter |
| Replaces | ADN11293 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 10 |
| Rated Power | 1.4 kW |
| Function | Starter |
| Type | Starter |
| Replaces | ADN11293 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of mounting bores at central releaser | 3 |
| Bore Diameter | 31 mm |
| Material | Aluminium |
| Extra Description | KIT3P (CSC) with High Efficiency Clutch |
| Function | Clutch Kit |
| Hub Profile | 24,2 x 21,8 |
| Additional Information 2 | without sensor, Special tools for mounting not necessary |
| Additional Information | with central slave cylinder |
| for flywheel manufacturer | LUK |
| Number of Teeth | 23 |
| Type | Clutch Kit |
| Weight | 6.19 kg |
| External diameter, clutch pressure plate | 240 mm |
| Clutch | for vehicles with push type clutch |
Additional Information
- 1x Valeo Clutch Kit (826731)
- 1x Valeo Central Slave Cylinder, clutch (810123)
Important compatibility info
| Number of mounting bores at central releaser | 3 |
| Bore Diameter | 31 mm |
| Material | Aluminium |
| Extra Description | KIT3P (CSC) with High Efficiency Clutch |
| Function | Clutch Kit |
| Hub Profile | 24,2 x 21,8 |
| Additional Information 2 | without sensor, Special tools for mounting not necessary |
| Additional Information | with central slave cylinder |
| for flywheel manufacturer | LUK |
| Number of Teeth | 23 |
| Type | Clutch Kit |
| Weight | 6.19 kg |
| External diameter, clutch pressure plate | 240 mm |
| Clutch | for vehicles with push type clutch |
Additional Information
- 1x Valeo Clutch Kit (826731)
- 1x Valeo Central Slave Cylinder, clutch (810123)
Important compatibility info
| Pulleys | with multi-belt pulley |
| Number of Ribs | 6 |
| Voltage | 12 V |
| Manufacturer Restriction | Valeo |
| Alternator Charge Current | 150 A |
| Function | Alternator |
| Type | Alternator |
| Weight | 6.65 kg |
| Length | 20.9 cm |
| Height | 18.01 cm |
| Width | 18.49 cm |
| Belt Pulley Diameter | 50 mm |
| Number of mounting bores | 4 |
| Clamp | B+ M8 |
Important compatibility info
| Pulleys | with multi-belt pulley |
| Number of Ribs | 6 |
| Voltage | 12 V |
| Manufacturer Restriction | Valeo |
| Alternator Charge Current | 150 A |
| Function | Alternator |
| Type | Alternator |
| Weight | 6.65 kg |
| Length | 20.9 cm |
| Height | 18.01 cm |
| Width | 18.49 cm |
| Belt Pulley Diameter | 50 mm |
| Number of mounting bores | 4 |
| Clamp | B+ M8 |
Important compatibility info
| Width | 131 mm |
| Battery Capacity 100h (Ah) | 38 Ah |
| Height | 193 mm |
| Length | 196 mm |
| Weight | 11300 |
| Type | AGM |
| Marine Cranking Amperage (MCA) | 525 A |
| Terminal Layout | Positive Front Right |
| BCI Group | U1R |
| Terminal Type | Standard |
| Voltage | 12 V |
| Ampere-Hours | 35 A |
| PHCA (5 sec) | 975 A |
| Cold Cranking Amperage (CCA) | 438 A |
| Battery Capacity 5h (Ah) | 30 Ah |
| Warranty | 2 year warranty |
Important compatibility info
| Outer diameter | 241 mm |
| Function | Clutch Kit |
| Additional Information | with central slave cylinder, with synthetic grease |
| Number of Teeth | 26 |
| Multi-piece | Three-piece |
| Clutch | Replacement for self-adjusting clutch pressure plate |
| Extra Description | SMARTFIT Solution Kit |
| Type | Clutch Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Blue Print Central Slave Cylinder, clutch (ADU173601)
Important compatibility info
| Outer diameter | 241 mm |
| Function | Clutch Kit |
| Additional Information | with central slave cylinder, with synthetic grease |
| Number of Teeth | 26 |
| Multi-piece | Three-piece |
| Clutch | Replacement for self-adjusting clutch pressure plate |
| Extra Description | SMARTFIT Solution Kit |
| Type | Clutch Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Blue Print Central Slave Cylinder, clutch (ADU173601)
Important compatibility info
| Placement on Vehicle | Front Axle |
| Height | 57 mm |
| Outer diameter | 293 mm |
| Brake Disc Thickness | 24 mm |
| Number of Holes | 5 |
| Minimum thickness | 22.5 mm |
| Centering Diameter | 58 mm |
| Surface | Coated |
| Machining | High-carbon |
| Tightening Torque | 100 Nm |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Extra Description | XTRA LINE - Xtra |
| Rotor Style | perforated/vented |
| Brake Disc Type | perforated/vented |
Additional Information
General Information
The specific drilling of Brembo Xtra brake discs provides a brilliant and efficient performance in any braking condition, to emphasise the driving style of true enthusiasts.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Height | 57 mm |
| Outer diameter | 293 mm |
| Brake Disc Thickness | 24 mm |
| Number of Holes | 5 |
| Minimum thickness | 22.5 mm |
| Centering Diameter | 58 mm |
| Surface | Coated |
| Machining | High-carbon |
| Tightening Torque | 100 Nm |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Extra Description | XTRA LINE - Xtra |
| Rotor Style | perforated/vented |
| Brake Disc Type | perforated/vented |
Additional Information
General Information
The specific drilling of Brembo Xtra brake discs provides a brilliant and efficient performance in any braking condition, to emphasise the driving style of true enthusiasts.
Important compatibility info
| Thread Measurement 2 | M24X1.5 |
| Function | Centre Rod Assembly |
| Pipe Diameter | 52 mm |
| Type | Centre Rod Assembly |
| Rod/Strut | Push Rod |
| Thread Measurement 1 | M30X1.5 RHT |
| Length | 1358 mm |
Important compatibility info
| Voltage | 12 V |
| Alternator Charge Current | 150 A |
| for OE number | 123520022 |
| Type | Alternator |
| Function | Alternator |
Important compatibility info
| Voltage | 12 V |
| Alternator Charge Current | 150 A |
| for OE number | 123520022 |
| Type | Alternator |
| Function | Alternator |
Important compatibility info
| Width | 62 mm |
| Outer diameter | 172 mm |
| Additional Information 2 | with bolts/screws |
| Number of Ribs | 4 |
| Parameter | 5PK |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Blue Print Belt Pulley, crankshaft (ADBP610110)
- 4x Blue Print Pulley Bolt (ADBP780053)
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023


























