Important compatibility info
| Additional Information | without electric motor |
| Type | Window Regulator |
| Combi Switch Function | with comfort function |
| Placement on Vehicle | Right Front |
| Function | Window Regulator |
| Extra Description | Fahren |
| Operating Mode | Electric |
| Number of Doors | 2 |
Important compatibility info
| Function | Camshaft Adjuster |
| Extra Description | febi Plus |
| Type | Camshaft Adjuster |
| Placement on Vehicle | Intake Side |
| Number of Teeth | 36 |
| Additional Information 2 | without screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Camshaft Adjuster |
| Extra Description | febi Plus |
| Type | Camshaft Adjuster |
| Placement on Vehicle | Intake Side |
| Number of Teeth | 36 |
| Additional Information 2 | without screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Oil Line, charger |
| Forward- /Backflow | Supply Line |
| Function | Oil Line, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Housing material | Grey Cast Iron |
| Function | Water Pump, engine cooling |
| Number of Wings | 7 |
| Number of Teeth | 23 |
| Seal Material | Rubber |
| Water pump impeller material | Grey Cast Iron |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| Additional Information 2 | with gear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Housing material | Grey Cast Iron |
| Function | Water Pump, engine cooling |
| Number of Wings | 7 |
| Number of Teeth | 23 |
| Seal Material | Rubber |
| Water pump impeller material | Grey Cast Iron |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| Additional Information 2 | with gear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Wings | 9 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Seal Material | Rubber |
| Housing material | Grey Cast Iron |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| for OE number | 906 200 61 01 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Wings | 9 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Seal Material | Rubber |
| Housing material | Grey Cast Iron |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| for OE number | 906 200 61 01 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Alternator |
| Height | 1999 mm |
| Type | Alternator |
| Manufacturer Restriction | Denso |
| Alternator Charge Current | 120 A |
| Pulleys | with freewheel belt pulley |
| Number of Ribs | 6 |
| Voltage | 12 V |
| Width | 2250 mm |
| Length | 3401 mm |
Important compatibility info
| Function | Alternator |
| Height | 1999 mm |
| Type | Alternator |
| Manufacturer Restriction | Denso |
| Alternator Charge Current | 120 A |
| Pulleys | with freewheel belt pulley |
| Number of Ribs | 6 |
| Voltage | 12 V |
| Width | 2250 mm |
| Length | 3401 mm |
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with freewheel belt pulley |
| Alternator Charge Current | 120 A |
| Type | Alternator |
| Manufacturer Restriction | Denso |
| Function | Alternator |
| Length | 4521 mm |
| Height | 4750 mm |
| Width | 4521 mm |
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with freewheel belt pulley |
| Alternator Charge Current | 120 A |
| Type | Alternator |
| Manufacturer Restriction | Denso |
| Function | Alternator |
| Length | 4521 mm |
| Height | 4750 mm |
| Width | 4521 mm |
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with V-ribbed belt pulley |
| Alternator Charge Current | 150 A |
| Type | Alternator |
| Manufacturer Restriction | Bosch |
| Function | Alternator |
| Length | 2350 mm |
| Height | 1699 mm |
| Width | 1849 mm |
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with V-ribbed belt pulley |
| Alternator Charge Current | 150 A |
| Type | Alternator |
| Manufacturer Restriction | Bosch |
| Function | Alternator |
| Length | 2350 mm |
| Height | 1699 mm |
| Width | 1849 mm |
Important compatibility info
| Pulleys | with V-ribbed belt pulley |
| Width | 1849 mm |
| Length | 2350 mm |
| Voltage | 12 V |
| Alternator Charge Current | 150 A |
| Type | Alternator |
| Manufacturer Restriction | Valeo |
| Function | Alternator |
| Height | 1699 mm |
Important compatibility info
| Pulleys | with V-ribbed belt pulley |
| Width | 1849 mm |
| Length | 2350 mm |
| Voltage | 12 V |
| Alternator Charge Current | 150 A |
| Type | Alternator |
| Manufacturer Restriction | Valeo |
| Function | Alternator |
| Height | 1699 mm |
Important compatibility info
| Type | Hydraulic Pump, steering |
| for steering manufacturer | VISTEON |
| Rotation Direction | Clockwise rotation |
| Belt Pulley Diameter | 135 mm |
| Pressure | 90 bar |
| Function | Hydraulic Pump, steering |
| Additional Information | without reservoir |
| Number of Ribs | 6 |
| Pulleys | with belt pulley |
| Operating Mode | Hydraulic |
| Additional Information 2 | Belt Pulley pressed on |
| Number of grooves | 6 |
| Fastening Type | Four-point attachment |
Important compatibility info
| Type | Hydraulic Pump, steering |
| for steering manufacturer | VISTEON |
| Rotation Direction | Clockwise rotation |
| Belt Pulley Diameter | 135 mm |
| Pressure | 90 bar |
| Function | Hydraulic Pump, steering |
| Additional Information | without reservoir |
| Number of Ribs | 6 |
| Pulleys | with belt pulley |
| Operating Mode | Hydraulic |
| Additional Information 2 | Belt Pulley pressed on |
| Number of grooves | 6 |
| Fastening Type | Four-point attachment |
Important compatibility info
| Function | Hydraulic Pump, steering |
| Type | Hydraulic Pump, steering |
| Operating Mode | Hydraulic |
| for steering manufacturer | Kayaba |
| Additional Information 2 | Belt Pulley pressed on |
| Pulleys | with belt pulley |
| Belt Pulley Diameter | 130 mm |
| Pressure | 120 bar |
| Number of grooves | 6 |
| Height | 114 mm |
| Number of Thread Bores | 3 |
| Fastening Type | 3-point attachment |
Important compatibility info
| Function | Hydraulic Pump, steering |
| Type | Hydraulic Pump, steering |
| Operating Mode | Hydraulic |
| for steering manufacturer | Kayaba |
| Additional Information 2 | Belt Pulley pressed on |
| Pulleys | with belt pulley |
| Belt Pulley Diameter | 130 mm |
| Pressure | 120 bar |
| Number of grooves | 6 |
| Height | 114 mm |
| Number of Thread Bores | 3 |
| Fastening Type | 3-point attachment |
Important compatibility info
| Additional Information 2 | with fastening material |
| Operating Mode | Electric |
| Type | Auxiliary water pump (cooling water circuit) |
| Function | Auxiliary water pump (cooling water circuit) |
| Extra Description | EASY FIT |
Important compatibility info
| Additional Information 2 | with fastening material |
| Operating Mode | Electric |
| Type | Auxiliary water pump (cooling water circuit) |
| Function | Auxiliary water pump (cooling water circuit) |
| Extra Description | EASY FIT |
Important compatibility info
| Paired article numbers | TY2014804 |
| Placement on Vehicle | Right |
| Bulb Type | H4 |
| Extra Description | TYC |
| Function | Headlight |
| Type | Headlight |
Important compatibility info
| Paired article numbers | TY2014804 |
| Placement on Vehicle | Right |
| Bulb Type | H4 |
| Extra Description | TYC |
| Function | Headlight |
| Type | Headlight |
Important compatibility info
| Operating Mode | Hydraulic |
| for steering manufacturer | KAYABA |
| Adapter Shape | triangular |
| Function | Hydraulic Pump, steering |
| Type | Hydraulic Pump, steering |
| Additional Information | with air intake pipe |
Important compatibility info
| Operating Mode | Hydraulic |
| for steering manufacturer | KAYABA |
| Adapter Shape | triangular |
| Function | Hydraulic Pump, steering |
| Type | Hydraulic Pump, steering |
| Additional Information | with air intake pipe |
Important compatibility info
| Clamp | B+ M8 |
| Belt Pulley Diameter | 57 mm |
| Function | Alternator |
| Manufacturer Restriction | Valeo |
| Alternator Charge Current | 140 A |
| Pulleys | with freewheel belt pulley |
| Number of Ribs | 5 |
| Voltage | 12 V |
| Type | Alternator |
| Number of mounting bores | 4 |
| Weight | 5.9 kg |
| Length | 26.01 cm |
| Height | 19.99 cm |
| Width | 22.5 cm |
Important compatibility info
| Clamp | B+ M8 |
| Belt Pulley Diameter | 57 mm |
| Function | Alternator |
| Manufacturer Restriction | Valeo |
| Alternator Charge Current | 140 A |
| Pulleys | with freewheel belt pulley |
| Number of Ribs | 5 |
| Voltage | 12 V |
| Type | Alternator |
| Number of mounting bores | 4 |
| Weight | 5.9 kg |
| Length | 26.01 cm |
| Height | 19.99 cm |
| Width | 22.5 cm |
Important compatibility info
| Cold Cranking Amperage (CCA) | 925 A |
| Voltage | 12 V |
| Post Positions | 9 |
| Cold-test Current, EN | 925 A |
| Battery Type Code | 640 |
| Terminal Layout | Terminals Across Centre |
| Function | Starter Battery |
| Extra Description | Super Heavy Duty Battery |
| Replaced by | YBX3642 |
| Hold-down Type | B00 |
| Type | Starter Battery |
| Filled Weight | 25 kg |
| Port / Connector type | T1 |
| Ampere-Hours | 110 Ah |
| Width | 173 mm |
| Height | 240 mm |
| Length | 329 mm |
| Warranty | 2 year warranty |
Important compatibility info
| Cold Cranking Amperage (CCA) | 925 A |
| Voltage | 12 V |
| Post Positions | 9 |
| Cold-test Current, EN | 925 A |
| Battery Type Code | 640 |
| Terminal Layout | Terminals Across Centre |
| Function | Starter Battery |
| Extra Description | Super Heavy Duty Battery |
| Replaced by | YBX3642 |
| Hold-down Type | B00 |
| Type | Starter Battery |
| Filled Weight | 25 kg |
| Port / Connector type | T1 |
| Ampere-Hours | 110 Ah |
| Width | 173 mm |
| Height | 240 mm |
| Length | 329 mm |
| Warranty | 2 year warranty |
Important compatibility info
| Core Depth | 18 mm |
| Net Weight | 4100 g |
| Core Width | 558 mm |
| Type | Condenser, air conditioning |
| Function | Condenser, air conditioning |
| Packaging width | 5.70 cm |
| Additional Information 2 | with dryer |
| Core Length | 619 mm |
| Extra Description | BEHR |
| Radiator type | Parallel cooling pipes |
| Packaging height | 62.00 cm |
| Packaging length | 70.8 cm |
Additional Information
General Information
The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.
Important compatibility info
| Core Depth | 18 mm |
| Net Weight | 4100 g |
| Core Width | 558 mm |
| Type | Condenser, air conditioning |
| Function | Condenser, air conditioning |
| Packaging width | 5.70 cm |
| Additional Information 2 | with dryer |
| Core Length | 619 mm |
| Extra Description | BEHR |
| Radiator type | Parallel cooling pipes |
| Packaging height | 62.00 cm |
| Packaging length | 70.8 cm |
Additional Information
General Information
The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 11 |
| Rated Power | 3 kW |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 11 |
| Rated Power | 3 kW |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with electric motor |
| Voltage | 12 V |
| Operating Mode | Electric |
| Combi Switch Function | without comfort function |
| Type | Window Regulator |
| Function | Window Regulator |
| Placement on Vehicle | Right Front |
Important compatibility info
| Additional Information | with electric motor |
| Voltage | 12 V |
| Operating Mode | Electric |
| Combi Switch Function | without comfort function |
| Type | Window Regulator |
| Function | Window Regulator |
| Placement on Vehicle | Right Front |
Important compatibility info
| Rated Power | 2 kW |
| Function | Starter |
| Fastening hole angle measurement [Degree] | 73 ° |
| Starter Type | Floating pinion |
| Pinion Rest Position | 21 mm |
| Connecting Angle | 73 ° |
| Clamp | 30,50 |
| Position / Degree | rechts ° |
| Number of Thread Bores | 2 |
| Flange Diameter | 82.5 mm |
| Rotation Direction | Clockwise rotation |
| Thread Measurement 1 | M12x1.75 |
| Number of Teeth | 9 |
| Thread Size | M12x1.75 |
| Length | 235 mm |
| Voltage | 12 V |
| Type | Starter |
Important compatibility info
| Rated Power | 2 kW |
| Function | Starter |
| Fastening hole angle measurement [Degree] | 73 ° |
| Starter Type | Floating pinion |
| Pinion Rest Position | 21 mm |
| Connecting Angle | 73 ° |
| Clamp | 30,50 |
| Position / Degree | rechts ° |
| Number of Thread Bores | 2 |
| Flange Diameter | 82.5 mm |
| Rotation Direction | Clockwise rotation |
| Thread Measurement 1 | M12x1.75 |
| Number of Teeth | 9 |
| Thread Size | M12x1.75 |
| Length | 235 mm |
| Voltage | 12 V |
| Type | Starter |
Important compatibility info
| Net weight | 1.112 kg |
| Cooling Type | Water-cooled |
| Type | Cooler, exhaust gas recirculation |
| Function | Cooler, exhaust gas recirculation |
| Additional Information | with gaskets/seals |
| Material | Metal |
| Weight | 1.32 kg |
Important compatibility info
| Net weight | 1.112 kg |
| Cooling Type | Water-cooled |
| Type | Cooler, exhaust gas recirculation |
| Function | Cooler, exhaust gas recirculation |
| Additional Information | with gaskets/seals |
| Material | Metal |
| Weight | 1.32 kg |
Important compatibility info
| Rotor Style | Vented |
| Type | Brake Disc Rotor |
| Inspection Tag | ECE R90 Homologated |
| Placement on Vehicle | Front Axle |
| Centering Diameter | 67 mm |
| Surface | Coated |
| Number of Holes | 5 |
| Outer diameter | 348 mm |
| Height | 66.1 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 28.4 mm |
| Function | Brake Disc |
| Number of mounting bores | 1 |
| Brake Disc Type | Vented |
Important compatibility info
| Rotor Style | Vented |
| Type | Brake Disc Rotor |
| Inspection Tag | ECE R90 Homologated |
| Placement on Vehicle | Front Axle |
| Centering Diameter | 67 mm |
| Surface | Coated |
| Number of Holes | 5 |
| Outer diameter | 348 mm |
| Height | 66.1 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 28.4 mm |
| Function | Brake Disc |
| Number of mounting bores | 1 |
| Brake Disc Type | Vented |
Important compatibility info
| Core Length | 625 mm |
| Type | Radiator, engine cooling |
| Function | Radiator, engine cooling |
| Gross Weight | 3600 g |
| Core Width | 428 mm |
| Core Depth | 16 mm |
Important compatibility info
| Core Length | 625 mm |
| Type | Radiator, engine cooling |
| Function | Radiator, engine cooling |
| Gross Weight | 3600 g |
| Core Width | 428 mm |
| Core Depth | 16 mm |
Important compatibility info
| Function | Camshaft |
| Type | Camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Camshaft |
| Type | Camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Cooler, exhaust gas recirculation |
| Material | Stainless Steel |
| Width | 75 mm |
| Height | 63 mm |
| Length | 285 mm |
| Type | Cooler, exhaust gas recirculation |
Important compatibility info
| Function | Cooler, exhaust gas recirculation |
| Material | Stainless Steel |
| Width | 75 mm |
| Height | 63 mm |
| Length | 285 mm |
| Type | Cooler, exhaust gas recirculation |
Important compatibility info
| Function | Clutch Kit |
| Number of Teeth | 14 |
| Outer diameter | 217 mm |
| Additional Information | with central slave cylinder, with synthetic grease |
| Multi-piece | Three-piece |
| Clutch | Replacement for self-adjusting clutch pressure plate |
| Extra Description | SMARTFIT Solution Kit |
| Type | Clutch Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Blue Print Clutch Kit (ADW193037)
- 1x Blue Print Central Slave Cylinder, clutch (ADW193602)
Important compatibility info
| Function | Clutch Kit |
| Number of Teeth | 14 |
| Outer diameter | 217 mm |
| Additional Information | with central slave cylinder, with synthetic grease |
| Multi-piece | Three-piece |
| Clutch | Replacement for self-adjusting clutch pressure plate |
| Extra Description | SMARTFIT Solution Kit |
| Type | Clutch Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Blue Print Clutch Kit (ADW193037)
- 1x Blue Print Central Slave Cylinder, clutch (ADW193602)
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023
























